771300-1030, Rear view camera adapter Toyota OEM camera 16Pin, ACV

Rear view camera adapter Toyota

Rear view camera adapters are required to maintain the OEM rear view camera.

These allow the connection of a factory pre-equipped camera to an aftermarket device with camera input.

Depending on the vehicle and equipment, the adapter provides the video signal RCA, a power supply +6V/ground for the OEM camera and the +12V revere gerar signal or this must be connected in the vehicle.

Vehicles with a 360° camera system or systems with moving distance lines may not be compatible.

Before installation check the correct assignment of the adapter to the OEM connector.

Many retrofit devices must be set to the camera function in the menu.

Note:

connector: 16 Pin Toyota
connectior: OEM rear view camera > RCA(m) yellow camera input

vehicles with rear view camera

connector:
red: +12V reverse gear signal fused
black: GND clamp 31

OEM camera supply voltage: +6V

+6V supply voltage > before installation check for correct assignment by measuring with OEM HU by measuring

Vehicle application:

Toyota Auris (E15) 03/2010 - 01/2013
Toyota Camry (XV50) 2014- 2015
Toyota Fortuner 2014 - 2015
Toyota Hilux (N25) 2013 - 2015
Toyota Innova 2014 - 2015
Toyota Prado 2014 - 2015

General installation instructions:

More connections, connection changes, alternative connections, connections of loose cables or connection extensions of loose cables specified in the information text or the manual are for orientation purposes only and for the information of trained specialist instaler.

More connections, changes to the cable configuration of the wiring harness or use of alternative connections or connection extensions:
1: Connections and changes are to be carried out exclusively by trained specialist installer.
2: Connections and modifications must be checked before connection for any manufacturer approvals or manufacturer warranty conditions that may be affected by the modifications.
3: Connections and modifications must be checked for function and correctness by measuring and comparing them with the vehicle's cable assignment diagram before connection.
4: Connections and modifications are made on the user's own responsibility without guarantee of function.
5: Connections and modifications are made on the user's own responsibility without any guarantee of damage to the vehicle, the retrofit device or the interface.
6: Modifications to the pre-assembled wiring harness may invalidate the product's warranty.

Technical Data, Signals, Connections, and Can-Bus

Signal and Power Supply

Depending on the vehicle and equipment, the adapter provides the video signal Cinch, a power supply +6V/ground for the OEM camera, and the +12V reverse signal, or this must be connected at a suitable location in the vehicle.

Connections

• Connection: 16 Pin Toyota connector
• Connection: OEM rearview camera > Cinch(m) yellow camera input
• Connection: red: +12V reverse signal secured
• Connection: black: ground terminal 31

Power Supply

Camera supply voltage: +6V

Installation Instructions

Checking the Assignment

• Before installation, the correct assignment of the adapter with the OEM connection must be checked.
• +6V supply voltage > check the correct assignment with the factory device by measuring before installation.

Setting the Aftermarket Devices

Many aftermarket devices must be set to the camera function in the menu.

Installation Notes

The connections, connection changes, alternative connections, connections of loose cables, or connection extensions of loose cables specified in the note text or the operating instructions are for orientation and information for trained personnel only.

1. Connections and changes are to be carried out exclusively by trained personnel.
2. Connections and changes must be checked for possible manufacturer approvals or for manufacturer warranty conditions that may be affected by the changes before connection.
3. Connections and changes must be checked for function and correctness by measuring and comparing with the vehicle's wiring diagram before connection.
4. Connections and changes are made at your own risk without a guarantee of function.
5. Connections and changes are made at your own risk without a guarantee of damage to the vehicle, the aftermarket device, or the interface.
6. Changes to the pre-assembled wiring harness may void the product warranty.