771000-6710-2, Rear view camera Transporter/Motorhome shutter/heating, ACV

Rear view camera shutter universal

Design: Transporter / Motorhome
Installation: build-up-construction / roof system

with camera heating / night view function / automatic shutter function / camera protective cover stainless steel / bracket stainless steel / camera body aluminium alloy / shutter aluminium alloy

Note:

acv cameras are suitable for continuous operation

before installation > check the viewing angle and camera alignment at the installation site with a test monitor

camera operating voltage: +12V
camera power supply: +12

connection:
red: +12V switched load-stable fused
black: ground car body direct/GND
yellow: +12V trigger for shutterfunction open/close

RCA(m) yellow: video
RCA(m) red/white: not connected

Product characteristic:

Design: bracket stainless steel / camera body aluminium alloy / shutter aluminium alloy
Color: black / silver
Extras: autmatic shutter function / camera heating / night view / camera protective cover
TV system: NTSC
Effective pixels: 752 x 582
Lux: 0 lux with activ night view
Nightview: 10 meter
Resolution: 600 TV lines
View angle: horizontal 100° vertical 65° +5°
IP Rating: IP 68
Terminal: 6 Pin system plug(m)
Operating voltage: +12V DC
Power supply: +12V DC
Current consumption: 300mA with activ shutter
Operating temperature: -20°C - 70°C
Storage temperature: -40°C - 85°C
Measurements: L / W / H - 120mm / 75mm / 100mm

Pigtail at the camera cm +/-:
6 Pin system plug(m)

Extension cable 15m +/-:
6 Pin system connector(f) / 6 Pin system connector(m)
power wire red 3m +/- inlay cable: connection to camera / connection reverse light to monitor
ground/GND wire black 3m +/- inlay cable: connectrion car body direct/GND to camera / car body direct/GND to monitor

Connector cable 1,7m +/-:
6 Pin system connector(f)
red: +12V power supply
black: GND
yellow: trigger
RCA(m) yellow: video

Installation accessories:

camera connection to interfaces:
Relay solid state close 2V-12V/1,5A max > item: 40-AD-REMOTE
camera connection to reversing light:
Rear viev camera voltage stabilizer reverse switch signal > item: 771000-6100

Technical Data, Signals, Connections, and Can-Bus

Power Supply

• Camera operating voltage: +12V
• Camera supply voltage: +12V
• Operating voltage: +12V DC
• Supply voltage: +12V DC

Connection Assignment

• Connection: red: +12V switched, load-stable secured, black: direct chassis ground/GND, yellow: +12V trigger for shutter function open/close
• RCA(m) yellow: Video, RCA(m) red/white: not assigned
• Connection: 6-pin system connector(m)
• Connection cable at the camera 90cm +/-: 6-pin system connector(m)
• Extension 15m +/-: 6-pin system connector(f) / 6-pin system connector(m), power line red 3m +/- wired through: connection to camera / connection to reversing light to monitor, ground line/GND black 3m +/- wired through: connection to chassis ground/GND to camera / connection to chassis ground/GND directly to monitor
• Connection cable 1.7m +/-: 6-pin system connector(f), red: +12V supply voltage, black: ground/GND, yellow: trigger, RCA(m) yellow: Video

Materials

• Construction: Stainless steel holder / Aluminum camera housing / Aluminum shutter
• Color: black / silver

Additional Features

• Automatic shutter function
• Camera heating
• Night vision function
• Camera protective cover

Sensor

• Sensor Type: 1/3" SHARP CCD
• Image System: NTSC Color
• Effective Pixels: 752 x 582
• Min. Lux: 0 Lux with active night vision function
• Night Vision: 10 meters
• Resolution: 600 TV lines
• Viewing Angle: horizontal 100° vertical 65° +5°
• Dust and Water Protection: IP68

Current Consumption

• Current consumption: max. 300mA with active shutter

Temperature Range

• Operating temperature range: -20°C - 70°C
• Storage temperature: -40°C - 85°C

Dimensions

• Dimensions: L / W / H - 120mm / 75mm / 100mm

Installation Instructions

Installation Preparation

Before installation > Check viewing angle and camera alignment at the installation site with a test monitor

Interface Connection

Camera connection to interfaces: Electronic relay 2V-12V/1.5A max > Item: 40-AD-REMOTE

Reversing Light Connection

Camera connection to reversing light: Reversing camera voltage stabilizer reversing signal > Item: 771000-6100

Important Notes

acv cameras are suitable for continuous operation