771000-6080, Rear view camera Maxus Deliver 9 10/2020-2025 break light, ACV

Rear view camera Maxus

Maxus Deliver 9 (SV63C) 10/2020 - 2025
Maxus eDeliver 9 (SV63C) 10/2020 - 2025

to replace the OEM 3´rd brake light
with guiding lines / night view function / adjustable view angle 20°

Note:

before installation > check the viewing angle and camera alignment at the installation site with a test monitor

camera operating voltage: +12V
camera power supply: +12V / +24V

connection:
red: +12V switched load-stable fused
black: car body direct groud/GND

RCA(m) yellow: video

cable loop:
green: cut/connect guiding lines activate/deactivate

Product characteristic camera:

Design: plastic
Color: black / red
Extras: guiding lines via cable loop / nightview / adjustable view angle 20°
Image sensor: 1/3" CMOS
TV system: NTSC
Effective pixels: 976 x 592
Lens: 12,6mm
Min.Lux: 0 Lux with active nightview
Nightview range: 35ft
Resolution: 600 TV lines
View angle: horizontal 115° vertical 75° +5°
IP Rating: IP67
Terminal: 4 Pin system connector(m)
Operating voltage: +12V DC
Power supply: +12V DC
Current consumption: 150mA during active night vision function
Operating temperature: -20°C - 70°C
Storage temperature: -40°C - 80°C
Measurements: OEM 3´rd brakelight

Pigtail at the camera 3,2m +/-:
4 Pin system connector(m)
1 cable loop

Adapter harness 20cm +/-:
4 Pin system connector(f) > 4 Pin acv-system connector(m)

Extension cable 15m +/-:
4 Pin acv-system connector(f) Ø10mm / 4 Pin acv-system connector(m) Ø5,2mm
power wire red 3m +/- inlay cable: connection to camera / connection reverse light to monitor
ground/GND wire black 3m +/- inlay cable: connectrion car body direct/GND to camera / car body direct/GND to monitor

Connector cable 20cm +/-:
4 Pin acv-system connector(f) Ø10mm
red: power supply
black: GND
RCA(m) yellow: video

Installation accessories:

camera connection to interfaces:
Relay solid state close 2V-12V/1,5A max > item: 40-AD-REMOTE
camera connection to reversing light:
Rear viev camera voltage stabilizer reverse switch signal > item: 771000-6100

Optional accessory:

Camera cable extension for acv camera 5m > item: 771000-6305
Camera cable extension for acv camera 10m > item: 771000-6310
Camera cable extension for acv camera 15m > item: 771000-6315

Technical Data, Signals, Connections and Can-Bus

Functions

• With orientation lines
• Night vision function
• Viewing angle adjustable 20°

Voltage

• Camera operating voltage: +12V
• Camera supply voltage: +12V / +24V
• Operating voltage: +12V DC
• Supply voltage: +12V DC

Connections

• Connection: red: +12V switched load-stable fused, black: chassis ground direct/GND, Cinch(m) yellow: video
• Cable loop: green: disconnect/connect to activate/deactivate orientation lines
• Connection: 4 Pin system connector(m)
• Connection cable 20cm +/-: 4 Pin acv system connector(f) Ø10mm, red: supply voltage, black: ground/GND, Cinch(m) yellow: video

Material

• Construction: plastic
• Color: black / red

Sensor

• Sensor type: 1/3" CMOS
• Image system: NTSC color
• Effective pixels: 976 x 592
• Lens: 2.6mm
• Min. Lux: 0 Lux with active night vision function
• Night vision range: 10m +/-
• Resolution: 600 TV lines
• Viewing angle: horizontal 115° vertical 75° +5°
• Dust and water protected: IP67

Current Consumption

• Current consumption: 150mA with night vision function on

Temperature Range

• Operating temperature range: -20°C - 70°C
• Storage temperature: -40°C - 80°C

Dimensions

• Dimensions: OEM brake light

Cables

• Connection cable at the camera 3.2m +/-: 1 cable loop
• Power cable red 3m +/- wired through: connection to camera / connection to reversing light to monitor
• Ground cable/GND black 3m +/- wired through: connection to chassis ground/GND at camera / connection to chassis ground/GND directly to monitor

Adapter

• Connection adapter 20cm +/-: 4 Pin system connector(f) > 4 Pin acv system connector(m) Ø5.2mm

Extension Cable

• Extension 15m +/-: 4 Pin acv system connector(f) Ø10mm / 4 Pin acv system connector(m) Ø5.2mm

Installation Instructions

Before installation > Check viewing angle and camera alignment at the installation site with a test monitor

Installation Accessories

• Camera connection to interfaces: electronic relay 2V-12V/1.5A max > Item: 40-AD-REMOTE
• Camera connection to reversing light: reversing camera voltage stabilizer reversing signal > Item: 771000-6100

Optional Accessories

• Camera cable extension for acv camera 5m > Item: 771000-6305
• Camera cable extension for acv camera 10m > Item: 771000-6310
• Camera cable extension for acv camera 15m > Item: 771000-6315

Important Notes

acv cameras are suitable for continuous operation