771000-6060, Rear view camera Mercedes Vito/Viano (W447) single backdoor, ACV

Rear view camera

Mercedes Vito/Viano (W447) with single backdoor 2016 - 2021

to replace the 3rd brake light
with guiding lines via jumper and adjustable view angle

Note:

all acv cameras are suitable for +12V continuous operation
vehicles without splash water nozzle in the OEM 3rd brake light > seal and close the splash water nozzle preparation with suitable means
connection:
red +12V switched load-stable (fused) black ground car body direct
Product characteristic:

Design: plastic
Color: black / red
Extras: guiding lines via jumper and adjustable view angle
Image sensor: 1/3" CMOS
TV system: NTSC
Effective pixels: 976 x 592
Lens: 1,9mm / F 2.0
Resolution: 600 TV lines
Lens angle diagonal: 160° + 5°
View angle: horizontal 115° vertical 75° + 5°
IP Rating: IP 67
Terminal: 4-pin mini-plug ( male ) 5,2 mm
Power supply: DC 12V + 10%
Operating temperature: -30°C - 75°C
Storage temperature: -40°C - 80°C
Measurements: see 3´rd OEM brake light

Pigtail at the camera:

1 Meter cable with 4-pin mini plug (male) 5,2 mm incl. 1 jumper

6,5 Meter extension cable incl. 3 meter power wire to connect at the reverse light
and inlay cable to connect at the power from the device
4-pin mini plug (female) 10 mm and plug (male) 5,2 mm

0,2 Meter power wire harness incl. fuse and video connector (RCA)

Installation accessories: camera connection to interfaces Relay solid state close 2V-12V/1,5A max: 40-AD-REMOTEcamera connection to reversing light Rear viev camera voltage stabilizer reverse switch signal: 771000-6100

Optional accessory:

771000-6305 Extension cable 5 Meter
771000-6310 Extension cable 10 Meter
771000-6315 Extension cable 15 Meter

Technical Data, Signals, Connections and Can-Bus

Camera Features

• With orientation lines and adjustable viewing angle
• Sensor Type: 1/3" CMOS
• Image System: NTSC Color
• Effective Pixels: 976 x 592
• Resolution: 600 TV lines
• Lens: 1.9mm / F 2.0
• Viewing Angle: 160° + 5°
• Viewing Angle: horizontal 115° vertical 75° + 5°
• Dust and Water Resistant: IP67

Connection Details

• Connection: red +12V switched load-stable (fused) black ground/GND directly to chassis
• Connection: 4 Pin Mini-Plug 5.2 mm

Material and Color

• Construction: Plastic
• Color: black / red

Power Supply

• Supply Voltage: 12Volt + 10 %

Temperature Range

• Operating Temperature Range: -30°C - 75°C
• Storage Temperature: -40°C - 80°C

Dimensions

• Dimensions: see OEM brake light

Cable Details

• 1 Meter Cable with 4-Pin Mini-Plug 5.2 mm
• 1 Meter Cable with 4-pin Mini-Plug incl. 1 Jumper
• 6.5 Meter Extension incl. 3 Meter Power Cable for connection to reversing light and wiring through to connection cable at end device
• 4-Pin Mini-Socket 10 mm and Plug 5.2 mm
• 0.2 Meter Power Connection Cable incl. Fuse and Video Connection Cable (RCA)

Installation Instructions

General Instructions

• Vehicles without spray nozzle in the OEM 3rd brake light: Seal and close spray nozzle preparation with suitable means

Installation Accessories

• Camera connection to interfaces closing relay electronic 2V-12V/1.5A max: 40-AD-REMOTE
• Camera connection to reversing light reversing camera voltage stabilizer reversing signal: 771000-6100

Optional Accessories

• 771000-6305 Extension 5 Meters
• 771000-6310 Extension 10 Meters
• 771000-6315 Extension 15 Meters

Important Notes

All acv cameras are suitable for connection to +12V continuous operation