771000-6052, Rear view camera Citroen/Opel/Fiat/Peugeot 3rd break light, ACV

Rear view camera Citroen / Fiat / Opel / Peugeot / Toyota

Citroen
Citroen Jumper (250) 10/2006 - 11/2011
Citroen Jumper (250) 11/2011 - 05/2014
Citroen Jumper (250) 05/2014 - 10/2022
Citroen Jumper (250) 10/2022 - 06/2024
Citroen Jumper (250) 07/2024 -2026
Citroen e-Jumper (250) 10/2021 - 06/2024
Citroen e-Jumper (250) 07/2024 -2026
Citroen Relay (250) 2006- 2024

Fiat
Fiat Ducato (ZAF 250) 06/2006 - 06/2011
Fiat Ducato (ZAF 250) 06/2011 - 05/2014
Fiat Ducato (ZAF250) 05/2014 - 03/2021
Fiat Ducato (ZAF 250) 11/2021 - 11/2023
Fiat Ducato (ZAF 250) 11/2023 - 2026
Fiat e-Ducato (ZAF 250) 04/2021 - 03/2024
Fiat e-Ducato (ZAF 250) 03/2024 -2026

Opel
Opel Movano Cargo C (Y) 10/2021 - 01/2024
Opel Movano Cargo C (Y) 01/2024 - 2026
Opel Movano Electric Cargo C (Y) 10/2021 - 01/2024
Opel Movano Electrik Cargo C (Y) 01/2024 - 2026

Peugeot
Peugeot Boxer (Y) 02/2007 - 07/2011
Peugeot Boxer (Y) 07/2011 - 05/2014
Peugeot Boxer (Y) 09/2014 - 12/2019
Peugeot Boxer (Y) 08/2018 - 06/2024
Peugeot Boxer (Y) 07/2024 - 2026
Peugeot e-Boxer (Y) 10/2021 - 06/2024
Peugeot e-Boxer (Y) 07/2024 - 2026

Toyota
Toyota Proace Max (T) 08/2024 - 2026
Toyota Proace Max Electric (T) 01/2025 - 2026

to replace the OEM 3rd brake light / bolting from inside the vehicle

with guiding lines / night view function / adjustable view angle 20°

Note:

before installation > check the viewing angle and camera alignment at the installation site with a test monitor

connection:
red: +12V switched load-stable fused
black: car body direct groud/GND

RCA(m) yellow: video

jumper:
white: guiding lines activate/deactivate

lighting error in informations display > connect OEM lamp in parallel

Product characteristic camera:

Design: plastic
Color: black / red
Extras: guiding lines via jumper, nightview and 20° adjustable view angle
Image sensor: 1/4" CMOS
TV system: NTSC
Effective pixels: 976 x 592
Lens: 1,9mm / F 2.0
Min.Lux: 0 Lux with active nightview
Resolution: 600 TV lines
Lens angle: diagonal 160°
View angle: horizontal 115° vertical 75° +5°
IP Rating: IP68
Terminal: 4 Pin acv-system connector(m) Ø5,2 mm
Operating voltage: +12V DC
Power supply: +12V DC
Current consumption: 150mA during active night vision function
Operating temperature: -30°C - 75°C
Storage temperature: -40°C - 80°C
Measurements: OEM 3´rd brakelight

Pigtail at the camera +/-:
4 Pin acv-system connector(m) Ø5,2mm
1 jumper

Extension cable 6,5m +/-:
4 Pin acv-system connector(f) Ø10mm / 4 Pin acv-system connector(m) Ø5,2mm
power wire red 3m +/- inlay cable: connection to camera / connection reverse light to monitor
ground/GND wire black 3m +/- inlay cable: connectrion car body direct/GND to camera / car body direct/GND to monitor

Connector cable 20cm +/-:
4 Pin acv-system connector(f) Ø10mm
red: power supply
black: GND
RCA(m) yellow: video

Installation accessories:

camera connection to interfaces:
Relay solid state close 2V-12V/1,5A max > item: 40-AD-REMOTE
camera connection to reversing light:
Rear viev camera voltage stabilizer reverse switch signal > item: 771000-6100

Optional accessory:

Camera cable extension for acv camera 5m > item: 771000-6305
Camera cable extension for acv camera 10m > item: 771000-6310
Camera cable extension for acv camera 15m > item: 771000-6315

Technical Data, Signals, Connections and Can-Bus

Functions

• With orientation lines
• Night vision function
• Viewing angle adjustable 20°

Connections

• Connection: red: +12V switched load-stable secured, black: chassis ground direct/GND, Cinch(m) yellow: video
• Jumper: white: activate/deactivate orientation lines

Technical Data Camera

• Construction: plastic
• Color: black / red
• Extras: orientation lines via jumper / night vision function / viewing angle adjustable 20°
• Sensor type: 1/4" CMOS
• Image system: NTSC color
• Effective pixels: 976 x 592
• Lens: 1.9mm / F 2.0
• Min.Lux: 0 with active night vision function
• Resolution: 600 TV lines
• Lens angle: diagonal 160°
• Viewing angle: horizontal 115° vertical 75° +5°
• Dust and waterproof: IP68
• Connection: 4 Pin acv system connector Ø5.2mm
• Operating voltage: +12V DC
• Supply voltage: +12V DC
• Current consumption: 150mA with night vision function on
• Operating temperature range: -30°C - 75°C
• Storage temperature: -40°C - 80°C
• Dimensions: OEM brake light

Cables and Connectors

• Connection cable at the camera 1m +/-: 4 Pin acv system connector(m) Ø5.2mm, 1 jumper

Extension Cable

• Extension 6.5m +/-: 4 Pin acv system connector(f) Ø10mm / 4 Pin acv system connector(m) Ø5.2mm
• Power line red 3m +/- wired through: connection to camera / connection reverse light to monitor
• Ground line/GND black 3m +/- wired through: connection chassis ground/GND to camera / connection chassis ground/GND direct to monitor

Connection Cable

• Connection cable 20cm +/-: 4 Pin acv system connector(f) Ø10mm, red: supply voltage, black: ground/GND, Cinch(m) yellow: video

Installation Instructions

Installation Preparation

Before installation > Check viewing angle and camera alignment at the installation site with a test monitor.

Installation Accessories

• Camera connection to interfaces: electronic relay 2V-12V/1.5A max > Article: 40-AD-REMOTE
• Camera connection to reverse light: reversing camera voltage stabilizer reverse signal > Article: 771000-6100

Optional Accessories

• Camera cable extension for acv camera 5m > Article: 771000-6305
• Camera cable extension for acv camera 10m > Article: 771000-6310
• Camera cable extension for acv camera 15m > Article: 771000-6315

Installation Notes

Lighting error display in the FIS > Connect OEM light source in parallel.

Important Notes

acv cameras are suitable for continuous operation.