771000-2000, Rear view camera adapter OEM camera 52Pin Fiat/32Pin Ford, ACV

Rear view camera adapter Alfa Romeo / Citroen / Dodge / Fiat / Ford / Iveco / Jeep / Peugeot

Rear view camera adapters are required to maintain the OEM rear view camera.

These allow the connection of a factory pre-equipped camera to an aftermarket device with camera input.

Depending on the vehicle and equipment, the adapter provides the video signal RCA, a power supply +6V/ground for the OEM camera and the reversing signal.

Vehicles with a 360° camera system or systems with moving distance lines may not be compatible.

Before installation, check the correct assignment of the adapter to the OEM connector.

Many retrofit devices must be set to the camera function in the menu.

Note:

connector: 52 Pin Fiat contacts
connector: OEM rear view camera > RCA(m) yellow

yellow: Video+
black: Video-

check assignment by measuring before installation

vehicles with 52 Pin Fiat connector OEM rear view camera connection:
red: Pin 31 Video+
white: Pin 32 Video -
black: Pin 33 shield

troubleshooting for flickering camera image: connect shield Pin 33 to GND contact

Ford vehicles with 32 Pin Ford connector OEM rear view camera connection:
Pin 14: Video+
Pin 25: Video-

troubleshooting for flickering camera image: connect Pin 24 to GND contact

Vehicle application:

Alfa Romeo
Alfa 4C (960) 01/2014 - 08/2018
Alfa Romeo Giuletta (940) 10/2013 - 04/2016
Alfa Romeo Giuletta (940) 04/2016 - 12/2021
Alfa Romeo MiTo (955) 12/2013 - 08/2016
Alfa Romeo MiTo (955) 08/2016 - 08/2018

Citroen
Citroen Jumper (250) 05/2014 - 10/2022
Citroen Jumper (250) 10/2022 - 2024
Citroen e-Jumper (259 10/2021 - 2024
Citroen Relay (250) 2006- 2024

Dodge
Dodge Durango 2014 - 2015
Dodge RAM Promaster 2014 - 2015
Dodge RAM Promaster City 2015 - 2021
Dodge Ram 2013 - 2018

Fiat
Fiat 500 (ZAF 312) 07/2015 - 2024
Fiat 500L (ZAF 199) 10/2012 - 07/2017
Fiat 500L (ZAF 199) 07/2017 - 03/2022
Fiat 500X (ZAF 334) 01/2015 - 08/2018
Fiat 500X (ZAF 334) 09/2018 - 2024
Fiat Doblo (ZAF 263) 01/2015 - 06/2022
Fiat Ducato (ZAF 250) 05/2014 -11/2021

Ford
Ford Fiesta (JHH) 06/2017 - 03/2022
Ford Fiesta (JHH) 03/2022 - 2024
Ford Transit (FAC/FAD) 06/2019 - 2024
Ford Transit Connect (PJ2) 06/2018 - 2024
Ford Transit Custom (FAC/FAD) 01/2018 - 06/2023
Ford Transit Custom (FAC/FAD) 07/2023 - 2024

Iveco
Iveco Daily 2019 - 2024*

Jeep
Jeep Grand Cherokee (WK) 06/2013 - 12/2016
Jeep Renegade (BU) 10/2014 - 08/2018
Jeep Renegade (BU) 09/2018 - 10/2020

Opel
Opel Movano Cargo C (Y) 10/2021 - 01/2024
Opel Movano Cargo C (Y) 01/2024 - 2024
Opel Movano Electric Cargo C (Y) 10/2021 - 01/2024
Opel Movano Electric Cargo C (Y) 01/2024 - 2024

Peugeot
Peugeot Boxer (Y) 09/2014 - 12/2019
Peugeot Boxer (Y) 08/2018 - 2024
Peugeot e-Boxer (Y) 10/2021 - 2024

*vehicles with Hi-Connect OEM touchscreen HU

General installation instructions:

More connections, connection changes, alternative connections, connections of loose cables or connection extensions of loose cables specified in the information text or the manual are for orientation purposes only and for the information of trained specialist instaler.

More connections, changes to the cable configuration of the wiring harness or use of alternative connections or connection extensions:
1: Connections and changes are to be carried out exclusively by trained specialist installer.
2: Connections and modifications must be checked before connection for any manufacturer approvals or manufacturer warranty conditions that may be affected by the modifications.
3: Connections and modifications must be checked for function and correctness by measuring and comparing them with the vehicle's cable assignment diagram before connection.
4: Connections and modifications are made on the user's own responsibility without guarantee of function.
5: Connections and modifications are made on the user's own responsibility without any guarantee of damage to the vehicle, the retrofit device or the interface.
6: Modifications to the pre-assembled wiring harness may invalidate the product's warranty.

Technical Data, Signals, Connections, and Can-Bus

Preservation of OEM functionality: Retains the original camera quality and functions.

The adapter is specifically designed to preserve the OEM rearview camera and allows connection to an aftermarket device with a camera input.

Installation Instructions

Easy installation: Plug-and-play design for quick and straightforward setup.