321328-24, Adapter VAG 40Pin Quadlock>52Pin Quadlock MIB, ACV

Adapter VAG

This adapter allows the installation of an suitable OEM HU or interface with a vehicle-specific VAG 40 Pin quadlock connector in vehicles with VAG 52 Pin Quadlock connector and MIB PG platform.

Note:

connector: 52 Pin Quadlock > 40 Pin Quadlock

speaker and power supply connected through
CAN Bus connected through

Before installation:

check voltage supply of OEM antenna system > +12V supply voltage / +8.5V supply voltage
check the assignment of the OEM device or the interface and the vehicle connection for correctness using the vehicle wiring diagram

40 Pin Quadlock:
connector A
Pin 1 - Pin 8: speaker front/rear
Pin 9: CAN high
Pin 10: CAN low
Pin 12: GND clamp 31
Pin 15: +12V continuous current clamp 30

connector C
Pin 1: mikrophone - in
Pin 7: mikrophone + in

52 Pin Quadlock:
connector A
Pin 1 - Pin 8: speaker front/rear
Pin 17: GND clamp 31
Pin 18: +12V continuous current clamp 30

connector B
Pin 1: mikrophone + in
Bin 6: rear view camera Video +
Pin 7: mikrophone - in
Pin 12: rear view camera Video -

connector D
Pin 6: CAN high
Pin 12: CAN low

Coding of the vehicle may be necessary

Use case:

installation of suitable 40 Pin OEM HU in VW vehicles with 52 Pin connector and MIB PQ platform
RCD200 / RCD210 / RCD300 / RCD310 / RCD500 / RCD510 OEM HU
RNS315 / RNS510 OEM Sat Nav

installation of suitable SWC interfaces and Infodapters with 40 Pin connector in vehicles with 52 Pin connector and MIB PQ platform
SWC Audi/Seat/Skoda/VW different vehicles 40Pin Quadlock > item: 42a-1324-001
SWC VW different vehicles 40Pin Quadlock > item: 42xvw002
Infodapter VW different vehicles 40Pin Quadlock > item: 43uvw01

Vehicle application:

VW Beetle (16) 06/2016 - 03/2018
VW Caddy IV (DU) 06/2015 - 09/2020
VW Jetta (16) 2015 - 2018
VW Sharan II (7N) 07/2015 - 10/2021
VW T6 (7HC) 07/2015 - 08/2019
VW Tiguan II (5N) 05/2016 - 05/2021

General installation instructions:

Connections, connection changes, alternative connections, connections of loose cables or connection extensions of loose cables specified in the information text or the manual are for orientation purposes only and for the information of trained specialist instaler.

Connections, changes to the cable configuration of the wiring harness or use of alternative connections or connection extensions:
1: Connections and changes are to be carried out exclusively by trained specialist installer.
2: Connections and modifications must be checked before connection for any manufacturer approvals or manufacturer warranty conditions that may be affected by the modifications.
3: Connections and modifications must be checked for function and correctness by measuring and comparing them with the vehicle's cable assignment diagram before connection.
4: Connections and modifications are made on the user's own responsibility without guarantee of function.
5: Connections and modifications are made on the user's own responsibility without any guarantee of damage to the vehicle, the retrofit device or the interface.
6: Modifications to the pre-assembled wiring harness may invalidate the product's warranty.