ACV 771000-6023
Your shopping cart is empty!
Citroen
| Model | Years |
|---|---|
| Jumper | 2006–2011 |
| Jumper | 2011–2014 |
| Jumper | 2014–2022 |
| Jumper | 2021–2024 |
| Jumper | 2022–2024 |
| Jumper | 2024–2026 |
| Relay | 2006–2024 |
Fiat
| Model | Years |
|---|---|
| Ducato | 2006–2011 |
| Ducato | 2011–2014 |
| Ducato | 2014–2021 |
| Ducato | 2021–2023 |
| Ducato | 2021–2024 |
| Ducato | 2023–2026 |
| Ducato | 2024–2026 |
Opel
| Model | Years |
|---|---|
| Movano | 2021–2024 |
| Movano | 2024–2026 |
Peugeot
| Model | Years |
|---|---|
| Boxer | 2007–2011 |
| Boxer | 2011–2014 |
| Boxer | 2014–2019 |
| Boxer | 2018–2024 |
| Boxer | 2021–2024 |
| Boxer | 2024–2026 |
Toyota
| Model | Years |
|---|---|
| Proace Max | 2024–2026 |
| Proace Max | 2025–2026 |
Product Description
771000-6023, Rear view camera Citroen/Opel/Fiat/Peugeot 3rd break light, ACV
Rear view camera Citroen / Fiat / Opel / Peugeot / Toyota
to replace the OEM 3rd brake light diffuser at vehicles with interior accessories
with guiding lines / night view / 20° adjustable view angle
Note:
before installation > check the viewing angle and camera alignment at the installation site with a test monitor
camera operating voltage: +12V
camera power supply: +12
vehicles with interior trim > Motor Home/tool and gear truck:
assembly by replacing the OEM brake light diffuser
installation without the need of screwing into the trunk or interior
connection:
red: +12V switched load-stable fused
black: car body direct ground/GND
RCA(m) yellow: video
cable loop:
green: cut/connect guiding lines activate/deactivate
Product characteristic camera:
Design: plastic
Color: black / red
Extras: guiding lines via cable loop / nightview / adjustable view angle 20°
Image sensor: 1/3" CMOS
TV system: NTSC
Effective pixels: 976 x 592
Lens: 1,9mm / F 2.0
Min.Lux: 0 Lux with active nightview
Resolution: 600 TV lines
Lens angle: diagonal 160°
View angle: horizontal 115° vertical 75° +5°
IP Rating: IP68
Terminal: 4 Pin system connector(m)
Operating voltage: +12V DC
Power supply: +12V DC
Current consumption: 150mA during active night vision function
Operating temperature: -30°C - 75°C
Storage temperature: -40°C - 80°C
Measurements: OEM 3rd brakelight
Pigtail at the camera 50cm +/-:
4 Pin system connector(m)
1 cable loop
Adapter harness 20cm +/-:
4 Pin system connector(f) > 4 Pin acv-system connector(m)
Extension cable 15m +/-:
4 Pin acv-system connector(f) Ø10mm / 4 Pin acv-system connector(m) Ø5,2mm
power wire red 3m +/- inlay cable: connection to camera / connection reverse light to monitor
ground/GND wire black 3m +/- inlay cable: connectrion car body direct/GND to camera / car body direct/GND to monitor
Connector cable 20cm +/-:
4 Pin acv-system connector(f) Ø10mm
red: power supply
black: GND
RCA(m) yellow: video
Installation accessories:
camera connection to interfaces:
Relay solid state close 2V-12V/1,5A max > item: 40-AD-REMOTE
camera connection to reversing light:
Rear viev camera voltage stabilizer reverse switch signal > item: 771000-6100
Optional accessory:
Camera cable extension for acv camera 5m > item: 771000-6305
Camera cable extension for acv camera 10m > item: 771000-6310
Camera cable extension for acv camera 15m > item: 771000-6315
Technical Data, Signals, Connections and Can-Bus
Camera Features
- With orientation lines / night vision function / adjustable viewing angle 20°
- Camera operating voltage: +12V
- Camera supply voltage: +12V
- Camera product features:
- Construction: Plastic, Color: black / red
- Extras: Orientation lines via cable loop / night vision function / adjustable viewing angle 20°
- Sensor Type: 1/3" CMOS
- Image System: NTSC Color
- Effective Pixels: 976 x 572
- Lens: 1.9mm / F 2.0
- Min.Lux: 0 with active night vision function
- Resolution: 600 TV lines
- Lens Angle: diagonal 160°, horizontal 115°, vertical 75° +5°
- Dust and Waterproof: IP68
- Connection: 4 Pin System Connector(m)
- Operating Voltage: +12V DC
- Supply Voltage: +12V DC
- Current Consumption: 150mA with night vision function on
- Operating Temperature Range: -30°C - 75°C
- Storage Temperature: -40°C - 80°C
- Dimensions: OEM Brake Light
Connection Details
- Connection: red: +12V switched load-stable secured, black: direct chassis ground/GND, Cinch(m) yellow: Video
- Cable loop: green: disconnect/connect to activate/deactivate orientation lines
- Connection cable at the camera 50cm +/-: 4 Pin System Connector(m), 1 cable loop
- Connection adapter 20cm +/-: 4 Pin System Connector(f) > 4 Pin acv-System Connector(m) Ø5.2mm
- Extension 15m +/-: 4 Pin acv-System Connector(f) Ø10mm / 4 Pin acv-System Connector(m) Ø5.2mm, Power line red 3m +/- wired through: Connection to camera / connection to reversing light to monitor, Ground line/GND black 3m +/- wired through: Connection to chassis ground/GND at camera / connection to chassis ground/GND directly to monitor
- Connection cable 20cm +/-: 4 Pin acv-System Connector(f) Ø10mm, red: Supply voltage, black: Ground/GND, Cinch(m) yellow: Video
Installation Instructions
OEM Brake Light Replacement
For replacing the OEM 3rd brake light lens on vehicles with interior fittings
Interior Fitting Installation Notes
- Vehicles with interior fittings > Motorhomes/Workshop vehicles: Installation by replacing the OEM lens of the brake light
- Installation without screwing through the cargo area/interior
Installation Preparation
Before installation > Check viewing angle and camera alignment at the installation site with a test monitor
Installation Accessories
- Camera connection to interfaces: Electronic relay 2V-12V/1.5A max > Item: 40-AD-REMOTE
- Camera connection to reversing light: Reversing camera voltage stabilizer reversing signal > Item: 771000-6100
Optional Accessories
- Camera cable extension for acv camera 5m > Item: 771000-6305
- Camera cable extension for acv camera 10m > Item: 771000-6310
- Camera cable extension for acv camera 15m > Item: 771000-6315
Important Notes
acv cameras are suitable for continuous operation
