ACV 771000-2011

ACV 771000-2011

15.70€
Ex Tax: 12.66€
Brand:
Product Code: A771000-2011
Stock Out Of Stock

Mercedes-Benz

ModelYears
A-Class2004–2008
A-Class2008–2012
B-Class2005–2008
B-Class2008–2011
C-Class2004–2007
CLC2008–2011
CLK2005–2010
CLS2004–2008
CLS2008–2010
E-Class2002–2008
E-Class2008–2009
G-Class2007–2008
G-Class2008–2012
GL2006–2009
GL2009–2012
M-Class2005–2008
M-Class2008–2011
R-Class2005–2007
R-Class2007–2010
SL2006–2008
SL2008–2011
SLK2004–2008
SLK2008–2011
Sprinter2006–2013
Sprinter2013–2018
Vito2003–2010
Vito2010–2014
Vito2014–2019
Vito *2019–2023

Porsche

ModelYears
9112004–2009
Boxster2004–2009
Cayenne2002–2006
Cayman2005–2008

Volkswagen

ModelYears
Crafter2006–2011
Crafter2011–2016

Marked models: see conditions in the product description

Product Description

771000-2011, Rear view camera OEM camera adapter Fakra(m)>RCA(m), ACV

Rear view camera adapter Ford / Mercedes / Porsche / VW

Rear view camera adapters are required to maintain the OEM rear view camera.

These allow the connection of a factory pre-equipped camera to an aftermarket device with camera input.

Depending on the vehicle and equipment, the adapter provides the video signal RCA, a power supply +6V/ground for the OEM camera and the +12V revere gerar signal or this must be connected in the vehicle.

Vehicles with a 360° camera system or systems with moving distance lines may not be compatible.

Before installation check the correct assignment of the adapter to the OEM connector.

Many retrofit devices must be set to the camera function in the menu.

Note:

connector: Fakra(m)
connector: OEM rear view camera > RCA(m) rear view camera input aftermarket HU

cable length: 25 cm

vehicles with OEM rear view camera

depending on the aftermarket HU > installed camera image not available:
connect an additional GND contact to the RCA outer conductor

Use case:

rear view camera > rear view camera input aftermarket device

Vehicle Application:

Ford Blaupunkt OEM Sat Nav

Mercedes Audio 50 APS Comand NTG2 / NTG2.5 OEM Sat Nav

Porsche PCM2.0 / PCM2.1 OEM Sat Nav

VW 2-DIN OEM Sat Nav

*vehicles with Garmin Audio 30 OEM Sat Nav with camera range adjustable not supported.

Technical data, signals, connectors and CAN bus

Connectors

  • Note: Connector: Fakra (m)
  • Note: Connection: OEM reverse camera > Cinch (m) > aftermarket unit reverse signal input

Signals and power supply

Depending on the vehicle and equipment, the adapter provides the video signal (Cinch), a power supply (+6 V/ground) for the OEM camera, and the +12 V reverse signal, or these must be connected at a suitable point in the vehicle.

Cable length

Cable length: 25 cm

Installation notes

Preparation and device settings

  • Before installation, check that the adapter pin assignment matches the OEM connector.
  • Many aftermarket units must be set to the camera function in the menu.

Connection / application

  • Note: Connection: OEM reverse camera > Cinch (m) > aftermarket unit reverse signal input
  • For the following application: OEM reverse camera > aftermarket head unit reverse camera input

Signals and power supply

Depending on the vehicle and equipment, the adapter provides the video signal (Cinch), a power supply (+6 V/ground) for the OEM camera, and the +12 V reverse signal, or these must be connected at a suitable point in the vehicle.

Troubleshooting

Depending on the installed aftermarket unit: Camera image not available – connect an additional ground contact to the Cinch outer conductor.

Important notes

Compatibility

  • Vehicles with a 360° camera system, or systems with moving guide lines, may not be compatible under certain circumstances.
  • *Vehicles with Garmin Audio 30 OEM navigation with an adjustable camera area are not supported.

Note if the camera image is missing

Depending on the installed aftermarket unit: Camera image not available – connect an additional ground contact to the Cinch outer conductor.

ACV 771000-2011

ACV 771000-2011

15.70€