ACV 771094-1031

ACV 771094-1031

328.00€
Ex Tax: 264.52€
Brand:
Product Code: A771094-1031
Stock Out Of Stock

Fiat

ModelYears
Ducato2021–2023
Ducato2021–2024
Ducato2023–2026
Ducato2024–2026

Opel

ModelYears
Movano2024–2026

Peugeot

ModelYears
Boxer2024–2026

Toyota

ModelYears
Proace Max2024–2026
Proace Max2025–2026

Product Description

771094-1031, Rear view camera interface Citroen/Fiat/ Opel/OEM camera, ACV

Rear view camera interface Citroen / Fiat / Opel / Peugeot / Toyota

Rear view camera adapters are required to maintain the OEM rear view camera.

These allow the connection of a factory pre-equipped camera to an aftermarket device with camera input.

Depending on the vehicle and equipment, the adapter provides the video signal RCA, a power supply +6V/ground for the OEM camera and the +12V revere gerar signal or this must be connected in the vehicle.

Vehicles with a 360° camera system or systems with moving distance lines may not be compatible.

Before installation check the correct assignment of the adapter to the OEM connector.

Many retrofit devices must be set to the camera function in the menu.

Note:

connector: loose wires
connector: OEM camera Fakra L(f) > Fakra Z(m)
connector: reverse view camera input retrofit HU > RCA(f) yellow

connection:
red: +12V ignition clamp 15 fused
black: GND clamp 31
green: +12V reverse gear signal input

Camera signal:
adjust dipswitch position voltage-free

camera type 1: dipswitch 1 off / 2 off / 3 off
camera type 2: dipswitch 2 on / 2 off / 3 off
camera type 3: Dipschalter 2 off / 2 on / 3 off

LED:
red: interface in operation
green: reversing signal activated
bue: camera signal camera type valid

check the camera signal for proper operation and image quality before final installation:
not all OEM cameras are compatible

Technical Data, Signals, Connections and Can-Bus

Connections

  • Connection: loose cables
  • Connection: OEM camera Fakra L(f) > Fakra Z(m)
  • Connection: reversing camera input aftermarket device > Cinch(f) yellow
  • Connection: red: +12V ignition power terminal 15 fused
  • Connection: black: ground terminal 31
  • Connection: green: +12V reversing signal input

Signals

Depending on the vehicle and equipment, the adapter provides the video signal Cinch, a power supply +6V/ground for the OEM camera and the +12V reversing signal, or this must be connected at a suitable point in the vehicle.

Camera Signal and Dip Switch

  • Camera signal: adjust dip switch position without power
  • Camera type 1: dip switch 1 off / 2 off / 3 off
  • Camera type 2: dip switch 2 on / 2 off / 3 off
  • Camera type 3: dip switch 2 off / 2 on / 3 off

LED Indicators

  • LED: red: interface in operation
  • LED: green: reversing signal activated
  • LED: blue: camera signal camera type valid

Installation Instructions

Before installation, check the correct pin assignment of the adapter with the OEM connection. Many aftermarket devices need to be set to the camera function in the menu.

ACV 771094-1031

ACV 771094-1031

328.00€