ACV 771000-2010
Your shopping cart is empty!
Mercedes-Benz
| Model | Years |
|---|---|
| A-Class | 2004–2008 |
| A-Class | 2008–2012 |
| B-Class | 2005–2008 |
| B-Class | 2008–2011 |
| C-Class | 2004–2007 |
| CLC | 2008–2011 |
| CLK | 2005–2010 |
| CLS | 2004–2008 |
| CLS | 2008–2010 |
| E-Class | 2002–2008 |
| E-Class | 2008–2009 |
| G-Class | 2007–2008 |
| G-Class | 2008–2012 |
| GL | 2006–2009 |
| GL | 2009–2012 |
| M-Class | 2005–2008 |
| M-Class | 2008–2011 |
| R-Class | 2005–2007 |
| R-Class | 2007–2010 |
| SL | 2006–2008 |
| SL | 2008–2011 |
| SLK | 2004–2008 |
| SLK | 2008–2011 |
| Sprinter | 2006–2013 |
| Sprinter | 2013–2018 |
| Vito | 2003–2010 |
| Vito | 2010–2014 |
| Vito | 2014–2019 |
| Vito * | 2019–2023 |
Porsche
| Model | Years |
|---|---|
| 911 | 2004–2009 |
| Boxster | 2004–2009 |
| Cayenne | 2002–2006 |
| Cayman | 2005–2008 |
Volkswagen
| Model | Years |
|---|---|
| Crafter | 2006–2011 |
| Crafter | 2011–2016 |
Marked models: see conditions in the product description
Product Description
771000-2010, Rear view camera adapter RCA(f)>Fakra(f) aftermarket, ACV
Rear view camera adapter
Rear view camera adapters, image feeds and interfaces are required to connect an NTSC aftermarket rear view camera to an OEM device or an OEM Sat Nav, alternatively to replace a factory-fitted rear view camera.
Depending on the vehicle, equipment and the connection variant used, the vehicle must also be coded for a rear view camera and this entered in the installation list in order to prepare the image reproduction.
It may also be necessary to connect an additional +12V reversing signal, a ground contact or other additional cables to the OEM device for image switching.
Hinweis:
The error-free image reproduction of the reverse view camera must be checked after completing the necessary vehicle preparations before installing the camera.
connector: Fakra Z(f) > OEM rear view camera input
connector: NTSC rear view camera RCA(f) yellow
length: 25cm
OEM devices with Fakra(m) rear view camera input
Use case:
aftermarket camera NTSC > OEM rear view camera input
Vehicle Application:
Ford Blaupunkt OEM Sat Nav
Mercedes Audio 50 APS Comand NTG2 / NTG2.5 OEM Sat Nav
Porsche PCM2.0 / PCM2.1 OEM Sat Nav
VW 2-DIN OEM Sat Nav
*vehicles with Garmin OEM Sat Nav with camera range adjustable not supported
Technical Data, Signals, Connections, and Can-Bus
Connections
- Connection: Fakra Z(f) > OEM reverse camera input
- Connection: NTSC reverse camera Cinch(f) yellow
Technical Data
- Cable length: 25cm
Compatible Devices
- OEM devices with Fakra(m) reverse camera input
Application Area
- Aftermarket camera NTSC > OEM reverse camera input
Installation Instructions
Depending on the vehicle, equipment, and the connection variant used, the vehicle must be additionally coded for a reverse camera and entered into the installation list to prepare for image display.
It may also be necessary to connect an additional +12V reverse signal, a ground contact, or other additional cables for image switching to the OEM device.
Important Notes
The error-free image display of the reverse camera must be checked with it after completing the necessary vehicle preparations before camera installation.
Vehicles with Garmin OEM navigation with adjustable camera area are not supported.
