ACV 1030-02
Your shopping cart is empty!
Chrysler
| Model | Years |
|---|---|
| 300M | 1998–2001 |
| Caravan | 1996–2000 |
| Cherokee | 1998–2001 |
| Cirrus | 1995–2000 |
| Concorde | 1993–2001 |
| Fifth Avenue | 1979–1993 |
| Grand Cherokee | 1992–2001 |
| Grand Voyager | 1998–2000 |
| Imperial | 1990–1994 |
| Laser | 1984–1989 |
| LeBaron | 1984–1996 |
| LHS | 1994–2001 |
| Maserati TC | 1988–1991 |
| Neon | 1994–2001 |
| New Yorker | 1979–1997 |
| Prowler | 1997–2002 |
| PT Cruiser | 1999–2001 |
| Sebring | 1995–2001 |
| Stratus | 1995–2001 |
| Town & Country | 1990–2001 |
| Vision | 1995–1998 |
| Voyager | 1995–2001 |
Dodge
| Model | Years |
|---|---|
| Aries | 1984–1989 |
| Avenger | 1995–2000 |
| Caravan | 1984–2001 |
| Charger | 1984–1987 |
| Dakota | 1987–2001 |
| Daytona | 1984–1993 |
| Diplomat | 1984–1989 |
| Durango | 1998–2001 |
| Dynasty | 1988–1993 |
| Intrepid | 1993–2001 |
| Lancer | 1985–1989 |
| Neon | 1995–2001 |
| Omni | 1984–1990 |
| RAM | 1974–1993 |
| RAM | 1978–2001 |
| Shadow | 1987–1995 |
| Spirit | 1989–1995 |
| Stratus | 1995–2001 |
| Stratus | 2002–2006 |
| Van | 1978–2001 |
| Viper | 1996–2001 |
Eagle
| Model | Years |
|---|---|
| Vision | 1993–1997 |
Jeep
| Model | Years |
|---|---|
| Cherokee | 1988–2001 |
| Comanche | 1984–1992 |
| Grand Cherokee | 1992–2001 |
| Liberty | 1997–2001 |
| Sahara | 1997–2001 |
| Vision | 1993–1997 |
| Wrangler | 1988–2002 |
Plymouth
| Model | Years |
|---|---|
| 600E Class | 1984–1987 |
| Acclaim | 1989–1995 |
| Breeze | 1996–2000 |
| Caravelle | 1985–1988 |
| Gran Fury | 1984–1989 |
| Horizon | 1984–1990 |
| Neon | 1995–2001 |
| Prowler | 1997–2002 |
| Tourismo | 1987 |
| Voyager | 1984–2000 |
Toyota
| Model | Years |
|---|---|
| Van | 1984–1989 |
Product Description
1030-02, ISO Harness Adapter Chrysler/Dodge/Jeep7Pin/7Pin, ACV
ISO Harness Adapter for Chrysler / Dodge / Eagle / Jeep / Plymouth / Toyota
ISO adapter cables are used for the passive connection of retrofit devices to the factory plugs present in the radio installation slot.
Depending on the vehicle and equipment, the following signals are provided:
+12V continuous current (clamp 30)
+12V ignition (clamp 15)
Ground (clamp 31)
Dimmer (clamp 58)
Antenna remote
Loudspeaker connection for front/rear loudspeakers
For vehicles with different equipment, signals that are not available may have to be connected to suitable tapping points fused in the vehicle (e.g. fuse box) or additional adaptations/interfaces may have to be used:
CAN bus interfaces
SWC interfaces
Amplified system adapter
Camera adapter
The signals must be checked before connection.
Note:
connector: 7 Pin / 7 Pin Chrysler
black: ground (clamp 31)
Use case:
HU connector power/speaker
