771250-6001, Rear view camera interface Dacia/Opel/Renault Media Nav, ACV

Rear View Camera interface OBD activator Dacia / Fiat /Opel /Renault

OBD-REN-R

Rear view camera adapters, image feeds and interfaces are required to connect an NTSC aftermarket rear view camera to an OEM device or an OEM Sat Nav, alternatively to replace a factory-fitted rear view camera.

Depending on the vehicle, equipment and the connection variant used, the vehicle must also be coded for a rear view camera and this entered in the installation list in order to prepare the image reproduction.

It may also be necessary to connect an additional +12V reversing signal, a ground contact or other additional cables to the OEM device for image switching.

Note:

vehicles with 7" OEM Media Nav Sat Nav

OBD coding for 1 vehicle > chassis number is stored in the activator
OBD activator is excluded from exchange or credit note

The error-free image reproduction of the reverse view camera must be checked after completing the necessary vehicle preparations before installing the camera.

connector: 24 Pin OEM HU reverse view camera input
connector: NTSC rear view camera RCA(f) yellow

Use case:

aftermarket camera NTSC > OEM rear view camera input

Vehicle application:

Dacia
Dacia Duster (SD) 11/2013 - 12/2017
Dacia Duster (SR) 01/2018 - 07/2021
Dacia Duster (SR) 09/2021 - 2024
Dacia Logan MCV (SD) 07/2013 - 09/2020
Dacia Sandero (SD) 01/2013 - 09/2020
Dacia Sandero Stepway (SD) 01/2013 - 09/2020

Fiat
Fiat Talento (ZAF 296) 07/2016 - 10/2021

Nissan
Nissan NV300 (4/J4) 11/2016 - 06/2019
Nissan NV300 (4/J4) 06/2019 - 09/2021
Nissan NV300 (4/J4) 05/2021 - 09-2021
Nissan NV400 (M) 07/2014- 07/2020
Nissan NV400 (M) 07/2020 - 12/2021

Opel
Opel Movano B (X62) 10/2013 - 09/2019
Opel Movano B (X62) 10/2019 - 08/2021
Opel Vivaro B (X82) 06/2014 - 01/2019

Renault
Renault Captur (R) 06/2013 - 03/2017
Renault Captur (R) 03/2017 - 12/2019
Renault Master III (M) 09/2014 - 08/2018
Renault Master III Z.E. (M) 06/2018 - 06/2020
Renault Trafic III (J/JL) 09/2014 - 07/2019
Renault Trafic III (J/JL) 09/2019 - 03/2022

General installation instructions:

More connections, connection changes, alternative connections, connections of loose cables or connection extensions of loose cables specified in the information text or the manual are for orientation purposes only and for the information of trained specialist instaler.

More connections, changes to the cable configuration of the wiring harness or use of alternative connections or connection extensions:
1: Connections and changes are to be carried out exclusively by trained specialist installer.
2: Connections and modifications must be checked before connection for any manufacturer approvals or manufacturer warranty conditions that may be affected by the modifications.
3: Connections and modifications must be checked for function and correctness by measuring and comparing them with the vehicle's cable assignment diagram before connection.
4: Connections and modifications are made on the user's own responsibility without guarantee of function.
5: Connections and modifications are made on the user's own responsibility without any guarantee of damage to the vehicle, the retrofit device or the interface.
6: Modifications to the pre-assembled wiring harness may invalidate the product's warranty.

Technical Data, Signals, Connections, and Can-Bus

Connections

• Connection: 24 Pin Dacia Connector OEM Device Rearview Camera Input
• Connection: NTSC Rearview Camera Cinch(f) Yellow

Application

• Aftermarket Camera NTSC > OEM Rearview Camera Input

Additional Signals and Connections

It may be necessary to connect an additional +12V reverse signal, a ground contact, or other additional cables for image switching to the OEM device.

Installation Instructions

Image Playback Check

The error-free image playback of the rearview camera must be checked with it after completing the necessary vehicle preparations before camera installation.

Installation Notes

• Connections, connection changes, alternative connections, connections of loose cables, or connection extensions of loose cables specified in the note text or the operating instructions are for orientation and information for trained personnel only.
• Connections and changes must be carried out exclusively by trained personnel.
• Connections and changes must be checked for possible manufacturer approvals or manufacturer warranty conditions that may be affected by the changes before connection.
• Connections and changes must be checked for function and correctness by measuring and comparing with the vehicle's wiring diagram before connection.
• Connections and changes are made at one's own responsibility without a guarantee of function.
• Connections and changes are made at one's own responsibility without a guarantee of damage to the vehicle, the retrofit device, or the interface.
• Changes to the pre-assembled wiring harness may void the product warranty.

Important Notes

• OBD coding for 1 vehicle > VIN is stored in the activator.
• OBD activator is excluded from exchange or credit.