771215-1030, Rear view camera adapter Nissan OEM camera 24Pin, ACV

Rear view camera adapter Nissan

Rear view camera adapters are required to maintain the OEM rear view camera.

These allow the connection of a factory pre-equipped camera to an aftermarket device with camera input.

Depending on the vehicle and equipment, the adapter provides the video signal RCA, a power supply +6V/ground for the OEM camera and the +12V revere gerar signal or this must be connected in the vehicle.

Vehicles with a 360° camera system or systems with moving distance lines may not be compatible.

Before installation check the correct assignment of the adapter to the OEM connector.

Many retrofit devices must be set to the camera function in the menu.

Note:

connector: 24 Pin Nissan

connection +6V power supply > check correct connection before installation with OEM HU

vehicles with OEM rear view camera
vehicles with 360° OEM camera systems and separate camera control

vehicles without 360° OEM camera system controlled via OEM HU

red: +12V reverse signal output
black: GND clamp 31

Use case:

OEM rear view camera retention

Vehicle application:

Nissan Navara (D40) 04/2010 - 08/2015
Nissan Note (E11) 01/2009 - 08/2013
Nissan Note (E12) 10/2013 - 12/2016
Nissan Pathfinder (R51) 04/2010 - 08/2015
Nissan Qashqai (J10) 03/2010- 10/2014
Nissan X-Trail (T31) 10/2010 - 06/2014

*check changed assignment with OEM device:

Pin 21: power supply GND
Pin 22: +6V power supply
Pin 15: Video -
Pin 16: Video +

reverse gear signal: yellow

frontcamera switch not supported
camera control unit under driver's seat

General installation instructions:

More connections, connection changes, alternative connections, connections of loose cables or connection extensions of loose cables specified in the information text or the manual are for orientation purposes only and for the information of trained specialist instaler.

More connections, changes to the cable configuration of the wiring harness or use of alternative connections or connection extensions:
1: Connections and changes are to be carried out exclusively by trained specialist installer.
2: Connections and modifications must be checked before connection for any manufacturer approvals or manufacturer warranty conditions that may be affected by the modifications.
3: Connections and modifications must be checked for function and correctness by measuring and comparing them with the vehicle's cable assignment diagram before connection.
4: Connections and modifications are made on the user's own responsibility without guarantee of function.
5: Connections and modifications are made on the user's own responsibility without any guarantee of damage to the vehicle, the retrofit device or the interface.
6: Modifications to the pre-assembled wiring harness may invalidate the product's warranty.

Technical Data, Signals, Connections, and Can-Bus

Connections

• Connection: 24 Pin Nissan connector
• Connection +6V supply voltage > check correct pinning with OEM device before installation
• Check changed pin assignment with OEM device:
  • Pin 21: Ground supply voltage
  • Pin 22: +6V supply voltage
  • Pin 15: Video -
  • Pin 16: Video +

Signal Colors and Functions

• Red: +12V reverse signal output
• Black: Ground terminal 31
• Reverse signal: Yellow

Installation Location

Camera control unit under driver's seat.

Function Restrictions

Front camera switching not available.

Installation Instructions

Preparation for Installation

Before installation, check the correct pin assignment of the adapter with the OEM connection. Many aftermarket devices need to be set to the camera function in the menu.

General Installation Instructions

The connections, connection changes, alternative connections, connections of loose cables, or connection extensions of loose cables specified in the note text or the operating instructions are for orientation and information for trained personnel only.

Installation Instructions and Liability

1. Connections and changes are to be carried out exclusively by trained personnel.
2. Connections and changes must be checked for possible manufacturer approvals or warranty conditions potentially affected by the changes before connection.
3. Connections and changes must be checked for function and correctness by measuring and comparing with the vehicle's wiring diagram before connection.
4. Connections and changes are made at one's own risk without a guarantee of function.
5. Connections and changes are made at one's own risk without a guarantee of damage to the vehicle, the retrofit device, or the interface.
6. Changes to the pre-assembled wiring harness may void the product warranty.