771031-1030, Rear view camera adapter Chrysler/Dodge/Jeep/VW OEM camera, ACV

Rear view camera adapter for Chrysler / Dodge / Jeep / Lancia / Mitsubishi / VW

Rear view camera adapters are required to maintain the OEM rear view camera.

These allow the connection of a factory pre-equipped camera to an aftermarket device with camera input.

Depending on the vehicle and equipment, the adapter provides the video signal RCA, a power supply +6V/ground for the OEM camera and the +12V revere gerar signal or this must be connected in the vehicle.

Vehicles with a 360° camera system or systems with moving distance lines may not be compatible.

Before installation check the correct assignment of the adapter to the OEM connector.

Many retrofit devices must be set to the camera function in the menu.


Note:

connector: 22 Pin Chrysler
connection: OEM rear view camera > RCA(m) yellow camera input

connector coding must be modified

Vehicle application:

Chrysler
Chrysler 200 2011 - 2014
Chrysler 300/300C 2008 - 2010
Chrysler Aspen 2008 - 2009
Chrysler Sebring 2007 - 2010
Chrysler Town and Country 2008 - 2016

Dodge
Dodge Avenger 2008 - 2014
Dodge Caliber 2009 - 2012
Dodge Challenger 2008 - 2014
Dodge Charger 2008 - 2010
Dodge Dakota 2008 - 2011
Dodge Durango 2008 - 2009
Dodge Grand Caravan 2008 - 2017
Dodge Journey 2009 - 2010
Dodge Magnum 2008 - 2009
Dodge Nitro 2007 - 2011
Dodge RAM 2006 - 2008
Dodge RAM Dodge RAM 1500 2009 - 2011
Dodge RAM 2500 2010 - 2012
Dodge RAM 3500 2010 - 2012
Dodge RAM chassis cab 2011
Dodge RAM C/V Tradesman 2012 - 2015

Jeep
Jeep Commander 2008 - 2010
Jeep Compass 2009 - 2017
Jeep Grand Cherokee 2008 - 2012
Jeep Patriot 2009 - 2017
Jeep Liberty 2008 - 2012
Jeep Wrangler 2007 - 2017
Jeep Wrangler (JK body style) 2007 - 2018

Lancia
Lancia Voyager 2011 - 2015

Mitsubishi
Mitsubishi Raider 2008 - 2009

VW
VW Routan 2009 - 2013

Technical Data, Signals, Connections, and Can-Bus

Depending on the vehicle and equipment, the adapter provides the video signal Cinch, a power supply +6V/ground for the OEM camera, and the +12V reverse signal, or this must be connected at a suitable point in the vehicle.

Connections

• Connection: 22 Pin Chrysler connector
• Connection: OEM rearview camera > Cinch(m) yellow camera input

Installation Instructions

Before installation, the correct pin assignment of the adapter with the OEM connection must be checked. Many aftermarket devices need to be set to the camera function in the menu. The coding of the connector must be adjusted.