771000-6026, Rear view camera Caravan/Motor Home Hella brake light white, ACV

Rear view camera Dual view 2 camera lences

Caravan / Motor Home with Hella 2DA 343 106-201 3rd brake light

to replace the OEM 3rd brake light

white

Note:

all acv cameras are suitable for +12V continuous operation

to replace the OEM Hella 2DA 343 106-201 3rd brake light

Connection:
red: long range camera +12V switched load-stable fused
yellow: close up camera +12V switched load-stable fused
black: ground car body direct
white: ground car body direct

Product characteristic:

Design: plastic
Color: schwarz / white
Extras: 2 camera lenses
Image sensor: 1/3" CMOS
TV system: NTSC
Effective pixels: 976 x 592
Resolution: 600TV lines
View angle camera 1: horicontal 115 + 5° vertikal 75 + 5°
View angle camera 2: horizontal 48 + 5° vertikal 34 + 5°
IP Rating: IP 68
Terminal: 7-pin plug (male)
Power supply: DC 12V + 10%
Current consumption: 180mA
Operating temperature: -20°C - 75°C
Storage temperature: -40°C - 85°C
Measurements: looks as OEM 3´rd brakelight

Pigtail at the camera:

0,5 Meter cable 7 Pin plug (male)

System harness:

10 meter 7 Pin plug extention
0,2 Meter 7 Pin connector

Installation accessories:

camera connection to interfaces Relay solid state close 2V-12V/1,5A max: 40-AD-REMOTE
camera connection to reversing light Rear viev camera voltage stabilizer reverse switch signal: 771000-6100

Technical Data, Signals, Connections, and Can-Bus

Technical Data

• Construction: Plastic
• Color: Black/White
• Extras: 2 camera lenses
• Sensor Type: 1/3" CMOS
• Image System: NTSC Color
• Effective Pixels: 976 x 592
• Lens: 1.9mm / F 2.0
• Min. Lux: 0.1
• Resolution: 600 TV lines
• Viewing Angle Camera 1: diagonal 170°, horizontal 115°, vertical 75° + 5°
• Viewing Angle Camera 2: diagonal 95°, horizontal 48° + 5°, vertical 34° + 5°
• Dust and Water Protection: IP68
• Connection: 7-pin connector
• Supply Voltage: 12 Volts + 10%
• Current Consumption: 180 mA
• Operating Temperature Range: -30°C to 75°C
• Storage Temperature: -40°C to 80°C
• Dimensions: see OEM brake light

Connections

• Camera Connection Cable: 0.5-meter cable with 7-pin connector (m)
• Cable Set: 10-meter 7-pin extension, 0.2-meter 7-pin connection cable
• Connection:
  • Red: Long-range camera +12V switched, load-stable secured
  • Yellow: Short-range camera +12V switched, load-stable secured
  • Black: Ground/GND directly to chassis
  • White: Ground/GND directly to chassis
• Connection:
  • Black: Ground chassis
  • Red: Trigger line +12V switched Camera 1
  • RCA Yellow: Camera 1
  • Yellow: Trigger line +12V switched Camera 2
  • RCA White: Camera 2

Installation Instructions

• Installation Accessories:
  • Camera connection to interfaces electronic relay 2V-12V/1.5A max: 40-AD-REMOTE
  • Camera connection to reversing light reversing camera voltage stabilizer reverse signal: 771000-6100

Important Notes

All ACV cameras are suitable for connection to +12V continuous operation.