771000-6024, Rear view camera Citroen/Fiat/Opel/Peugeot 3rd break light, ACV

Rear view camera dual view Citroen / Fiat / Opel / Peugeot / Toyota

Citroen
Citroen Jumper (250) 10/2006 - 11/2011
Citroen Jumper (250) 11/2011 - 05/2014
Citroen Jumper (250) 05/2014 - 10/2022
Citroen Jumper (250) 10/2022 - 06/2024
Citroen Jumper (250) 07/2024 -2026
Citroen e-Jumper (250) 10/2021 - 06/2024
Citroen e-Jumper (250) 07/2024 -2026
Citroen Relay (250) 2006- 2024

Fiat
Fiat Ducato (ZAF 250) 06/2006 - 06/2011
Fiat Ducato (ZAF 250) 06/2011 - 05/2014
Fiat Ducato (ZAF250) 05/2014 - 03/2021
Fiat Ducato (ZAF 250) 11/2021 - 11/2023
Fiat Ducato (ZAF 250) 11/2023 - 2026
Fiat e-Ducato (ZAF 250) 04/2021 - 03/2024
Fiat e-Ducato (ZAF 250) 03/2024 -2026

Opel
Opel Movano Cargo C (Y) 10/2021 - 01/2024
Opel Movano Cargo C (Y) 01/2024 - 2026
Opel Movano Electric Cargo C (Y) 10/2021 - 01/2024
Opel Movano Electrik Cargo C (Y) 01/2024 - 2026

Peugeot
Peugeot Boxer (Y) 02/2007 - 07/2011
Peugeot Boxer (Y) 07/2011 - 05/2014
Peugeot Boxer (Y) 09/2014 - 12/2019
Peugeot Boxer (Y) 08/2018 - 06/2024
Peugeot Boxer (Y) 07/2024 - 2026
Peugeot e-Boxer (Y) 10/2021 - 06/2024
Peugeot e-Boxer (Y) 07/2024 - 2026

Toyota
Toyota Proace Max (T) 08/2024 - 2026
Toyota Proace Max Electric (T) 01/2025 - 2026

to replace the OEM 3rd brake light diffuser at vehicles with interior accessories

with night view function / adjustable view angle 20° / 2 camera lenses

Note:

before installation > check the viewing angle and camera alignment at the installation site with a test monitor

camera operating voltage: +12V
camera power supply: +12

vehicles with interior trim > Motor Home/tool and gear truck:
assembly by replacing the OEM brake light diffuser
installation without the need of screwing into the trunk or interior

connection:
red: +12V switched load-stable fused camera 1
black: car body direct groud/GND camera 1
yellow : +12V switched load-stable fused camera 2
white: car body direct groud/GND

RCA(m) yellow: video camera 1
RCA(M) white: video camera 2

connection to monitor with 2 x video input

connection to monitor with 1 x video input:
Video switcher 2x RCA(f)>1x RCA(m) +12V trigger > item: 771000-5008

Product characteristic camera:

Design: plastic
Color: black / red
Extras: 2 camera lenses / night view function / adjustable view angle 20°
Image sensor: 1/3" CMOS
TV system: NTSC
Effective pixels: 976 x 592
Lens: 1,9mm / F 2.0
Min.Lux: 0 Lux with active night view
Resolution: 600 TV lines
View angle camera 1: horizontal 115° vertical 75° +5°
View angle camera 2: horizontal 48 + 5° vertical 34 +5°
IP Rating: IP 68
Terminal: 7 Pin system connector(m)
Operating voltage: +12V DC
Power supply: +12V DC
Current consumption: 200mA during active night view function
Operating temperature: -30°C - 75°C
Storage temperature: -40°C - 80°C
Measurements: OEM 3rd brakelight

Pigtail at the camera 60cm +/-:
7 Pin system connector(m)

Extension cable 10m +/-:
7 Pin system connector(m) / 7 Pin system connector(f)

Connector cable 20cm +/-:
7 Pin system connector(m)
red: power supply
black: GND
yellow: power supply
white: GND
RCA(m) yellow: video
RCA(m) white: video

Installation accessories:

camera connection to interfaces:
Relay solid state close 2V-12V/1,5A max > item: 40-AD-REMOTE
camera connection to reversing light:
Rear viev camera voltage stabilizer reverse switch signal > item: 771000-6100

Technical Data, Signals, Connections and Can-Bus

Technical Data

• Camera operating voltage: +12V
• Camera supply voltage: +12V
• Sensor type: 1/3" CMOS
• Image system: NTSC color
• Effective pixels: 976 x 592
• Lens: 1.9mm / F 2.0
• Min. Lux: 0 with active night vision function
• Resolution: 600 TV lines
• Viewing angle camera 1: diagonal 170° horizontal 145° vertical 80° + 5°
• Viewing angle camera 2: diagonal 100° horizontal 80° + 5° vertical 50° + 5°
• Dust and water protected: IP68
• Operating voltage: +12V DC
• Supply voltage: +12V DC
• Current consumption: 200mA with night vision function on
• Operating temperature range: -30°C - 75°C
• Storage temperature: -40°C - 80°C
• Dimensions: OEM brake light

Connections

• Connection: red: +12V switched load-stable secured camera 1
• Connection: black: chassis ground direct/GND camera 1
• Connection: yellow: +12V switched load-stable secured camera 2
• Connection: white: chassis ground direct/GND camera 2
• Cinch(m) yellow: video camera 1
• Cinch(m) white: video camera 2
• Connection to monitors with 2 x video input
• Connection to monitors with 1 x video input: video switching 2x Cinch(f)>1x Cinch(m) +12V switched > Item: 771000-5008
• Connection: 7 pin system connector(f)
• Connection cable at the camera 60cm +/-: 7 pin system connector(m)
• Extension 10m +/-: 7 pin system connector(m) / 7 pin system connector(f)
• Connection cable 20cm+/-: 7 pin system connector(m)
• red: supply voltage
• black: ground/GND
• yellow: supply voltage
• white: ground/GND
• Cinch(m) yellow: video
• Cinch(m) white: video

Installation Instructions

General Instructions

• Before installation: check viewing angle and camera alignment at the installation site with a test monitor.
• Vehicles with interior fittings > Motorhomes/workshop vehicles: installation by replacing the OEM lens of the brake light.
• Installation without screwing through the cargo area/interior.

Installation Accessories

• Camera connection to interfaces: electronic relay 2V-12V/1.5A max > Item: 40-AD-REMOTE
• Camera connection to reversing light: reversing camera voltage stabilizer reversing signal > Item: 771000-6100

Important Notes

acv cameras are suitable for continuous operation.