381300-09-1, 2-DIN facia plate with pocket Toyota Prius 01/2004-06/2009, ACV

Facia plate 2-DIN with pocket Toyota

Metra 99-8240B

Many car manufacturers install car specific head units to match the optic
of the dashboard.

For this reason, you will need one of our facia plates to professionally fit a DIN or Double DIN aftermarket radio into your car.

You probably also need car specific harnesses, antenna adapters, SWC interfaces, camera interfaces or active system adapters.

Note:

Facia plate for 1-DIN and 2-DIN HU

HU assembly without sheet metal basket without HU trim frame

vehicles with rectangular OEM HU
vehicles with vents next to the OEM HU
vehicles with central monitor above the OEM HU

aiir-conditioning control unit:
after uninstalling the OEM unit a bridge resistor must be soldered in (look into the manual)

20 Pin connector on OEM HU
Pin 10 white
Pin 9 pink
bridge cable with resistor in scope of delivery

Vehicle application:

Toyota Prius NHW20 (HW2) 01/2004 - 06/2009

Colour: matte black

2-DIN mounting cutout HU display: 173mm x 99mm

Technical data, signals, connections and CAN bus

General

• Color: matte black

Dimensions

• 2-DIN radio display cut-out: 173mm x 99mm

20-pin Toyota connector on the OEM unit

• Pin 10: white
• Pin 9: pink

Cable with resistor

• Bridge the supplied cable with resistor.

Installation notes

General notes

• Fascia for 1-DIN and 2-DIN units.
• Unit installation without metal cage and without unit trim frame.

Vehicle equipment notes

• Vehicles with rectangular OEM unit.
• Vehicles with vents next to the OEM unit.
• Vehicles with central monitor above the OEM unit.

Climate control

Climate control: After uninstalling the OEM unit, a bridging resistor must be soldered in (see the operating instructions).

Cable with resistor

• Bridge the supplied cable with resistor.

Important notes

Additional vehicle-specific adapters

Additional vehicle-specific radio connection cables, antenna adapters, steering wheel remote control adapters, camera adapters and active system adapters are often required.

Notes

• Fascia for 1-DIN and 2-DIN units.
• Unit installation without metal cage and without unit trim frame.
• Vehicles with rectangular OEM unit.
• Vehicles with vents next to the OEM unit.
• Vehicles with central monitor above the OEM unit.

Climate control

Climate control: After uninstalling the OEM unit, a bridging resistor must be soldered in (see the operating instructions).

Cable with resistor

• Bridge the supplied cable with resistor.