772000-6041, Rear view camera AHD universal license plate holder EU, ACV

Rear view camera AHD universal

Design: License plate holder for EU license plates
Installation: replace OEM license plate holder

with guiding lines / nightview function / adjustable view angle

Note:

acv cameras are suitable for continuous operation

before installation > check the viewing angle and camera alignment at the installation site with a test monitor

camera power supply: +12V

connection:
red: +12V switched load-stable fused
black: car body direct groud/GND

RCA(m) yellow: video

jumper:
green: guiding lines activate/deactivate

patent holder not compatible with Austrian license plates

remove the plastic bars in the upper section to fit the licence plate
push the licence plate upwards from below and snap it into place at the bottom

Product characteristic camera:

Design: plastic
Color: black matt
Extras: license plate holder / guiding lines via jumper / nightview function
Image sensor: 1/3" AHD
TV system: NTSC color
Effective pixels: 1080 x 720
Lens: mm / F
Lux: 0 with active nightview function
Resolution: TV lines
Lens angle: diagonal
View angle: horizontal 115° / vertical 80° + 5°
IP Rating: IP67
Terminal: 4 Pin acv-system connector(m) Ø5,2 mm
Operating voltage: +12V DC
Power supply: +12V DC
Current consumption: 120mA with active nightview function
Operating temperature: -20°C - 70°C
Storage temperature: -40°C - 85°C
Measurements: L / H / D - 525mm / 125mm / 38mm

Pigtail at the camera 1m +/-:
4 Pin acv-system connector(m) Ø5,2mm
1 jumper

Extension cable 6,5m +/-:
4 Pin acv-system connector(f) Ø10mm / 4 Pin acv-system connector(m) Ø5,2mm
power wire red 3m +/- inlay cable: connection to camera / connection reverse light to monitor
ground/GND wire black 3m +/- inlay cable: connectrion car body direct/GND to camera / car body direct/GND to monitor

Connector cable 20cm +/-:
4 Pin acv-system connector(f) Ø10mm
red: power supply
black: GND
RCA(m) yellow: video

Installation accessories:

camera connection to interfaces:
Relay solid state close 2V-12V/1,5A max > item: 40-AD-REMOTE
camera connection to reversing light:
Rear viev camera voltage stabilizer reverse switch signal > item: 771000-6100

Optional accessory:

Camera cable extension for acv camera 5m > item: 771000-6305
Camera cable extension for acv camera 10m > item: 771000-6310
Camera cable extension for acv camera 15m > item: 771000-6315

Technical Data, Signals, Connections, and Can-Bus

Product Features

• Construction: Plastic
• Color: Matte Black
• Extras: License Plate Holder, Orientation Lines via Jumper, Night Vision Function

Sensor and Image System

• Sensor Type: 1/3" AHD
• Image System: NTSC Color
• Effective Pixels: 1080 x 720

Lighting

• Minimum Illumination: 0 Lux with Active Night Vision Function

Resolution and Viewing Angle

• Resolution: TV Lines
• Lens Angle: Diagonal
• Viewing Angle: Horizontal 115° / Vertical 80° + 5°

Protection Class

• Dust and Waterproof: IP67

Electrical Specifications

• Operating Voltage: +12V DC
• Current Consumption: 120mA with Active Night Vision Function

Temperature Range

• Operating Temperature Range: -20°C - 70°C
• Storage Temperature: -40°C - 85°C

Dimensions

• L / H / D: 525mm / 125mm / 38mm

Connections

• Connection: Red: +12V Switched Load Stable Secured, Black: Direct Chassis Ground/GND, Cinch(m) Yellow: Video
• Connection: 4 Pin acv System Connector(m) Ø5.2mm

Cables and Connectors

• Camera Connection Cable 1m +/-: 4 Pin acv System Connector(m) Ø5.2mm, 1 Jumper
• Extension 6.5m +/-: 4 Pin acv System Connector(f) Ø10mm / 4 Pin acv System Connector(m) Ø5.2mm, Power Line Red 3m +/- Wired Through: Connection to Camera / Connection to Reversing Light to Monitor, Ground Line/GND Black 3m +/- Wired Through: Connection to Chassis Ground/GND to Camera / Connection to Chassis Ground/GND Directly to Monitor
• Connection Cable 20cm +/-: 4 Pin acv System Connector(f) Ø10mm, Red: Power Supply, Black: Ground/GND, Cinch(m) Yellow: Video

Jumper Function

• Jumper: Green: Activate/Deactivate Orientation Lines

Installation Instructions

Mounting Type

• Mounting Type: Replacement of OEM License Plate Holder

Installation Check

• Before Installation: Check Viewing Angle and Camera Alignment at Installation Site with a Test Monitor

License Plate Installation

• For License Plate Installation: Remove Transport Securing Plastic Bars in the Upper Area, Insert License Plate from Bottom to Top and Snap in at the Bottom

Installation Accessories

• Camera Connection to Interfaces: Electronic Relay Closer 2V-12V/1.5A max > Article: 40-AD-REMOTE
• Camera Connection to Reversing Light: Reversing Camera Voltage Stabilizer Reversing Signal > Article: 771000-6100

Optional Accessories

• Camera Cable Extension for acv Camera 5m > Article: 771000-6305
• Camera Cable Extension for acv Camera 10m > Article: 771000-6310
• Camera Cable Extension for acv Camera 15m > Article: 771000-6315

Important Notes

• acv Cameras are Suitable for Continuous Operation
• License Plate Holder Not Suitable for Austrian License Plates