771143-1030, Rear view camera adapter Hyundai OEM camera, ACV

Rear view camera adapter Hyundai

Rear view camera adapters are required to maintain the OEM rear view camera.

These allow the connection of a factory pre-equipped camera to an aftermarket device with camera input.

Depending on the vehicle and equipment, the adapter provides the video signal RCA, a power supply +6V/ground for the OEM camera and the reversing signal.

Vehicles with a 360° camera system or systems with moving distance lines may not be compatible.

Before installation check the correct assignment of the adapter to the OEM connector.

Many retrofit devices must be set to the camera function in the menu.

Note:

check connection +6V supply voltage output of the adapter for correct assignment with OEM HU before installation

connector: OEM camera 24 Pin Hyundai > RCA(m) yellow

connection:
red: +12V reverse gear signal
black: GND clamp 31

Vehicle application:

Hyundai ix35 (LM) 2014 - 2018
Hyundai Veloster 2011-2017

Technical Data, Signals, Connections, and Can-Bus

Technical Specifications

Depending on the vehicle and equipment, the adapter provides the video signal Cinch, a power supply +6V/ground for the OEM camera, and the reverse signal.

Connection Details

• Connection: OEM camera 24 Pin Hyundai connector > Cinch(m) yellow
• Connection: red: +12V reverse signal black: ground terminal 31

Installation Instructions

Installation Preparation

Before installation, check the correct pin assignment of the adapter with the OEM connection.

Installation Adjustments

Many aftermarket devices need to be set to the camera function in the menu.

Important Notes

Before installation, check the +6V power supply output of the adapter for correct pin assignment with the factory device.