771000-6708, Rear view camera sub-construction foursquared small design, ACV

Rear view camera universal

Design: foursquared
Installation: sub-construction

with small design / mirror function / guiding lines

Note:

acv cameras are suitable for continuous operation

before installation > check the viewing angle and camera alignment at the installation site with a test monitor

camera operating voltage: +3V
camera power supply: +12V / +24V

connection without voltage converter +3V in scope of delivery damages the camera

connection:
red: +12V / +24V switched load-stable fused
black: car body direct groud/GND

RCA(m) yellow: video

Product characteristic camera:

Design: plastic
Color: black
Extras: small design
Image sensor: 1/3" CMOS
TV system: NTSC
Lens: 1,9mm / F 2.0
Min.Lux: 0.1 Lux
Resolution: 980 x 480 TV lines
Lens angle: diagonal 170°
View angle: horizontal 120° vertical 85° +5°
IP Rating: IP68
Terminal: 4 Pin acv-system connector(m) Ø5,2 mm
Operating voltage: +3V DC
Power supply: +12V / +24V DC > with voltage converter
Current consumption: 60mA
Operating temperature: -20°C - 70°C
Storage temperature: -40°C - 80°C
Measurements: L / B / H / 25,5mm / 28mm / 23,5mm

Pigtail at the camera 1m +/-:
4 Pin acv-system connector(m) Ø5,2mm

Voltage converter +3V:
4 Pin acv-system connector(f) Ø10mm / 4 Pin acv-system connector(m) Ø5,2mm

Extension cable 6,5m +/-:
4 Pin acv-system connector(f) Ø10mm / 4 Pin acv-system connector(m) Ø5,2mm
power wire red 3m +/- inlay cable: connection to camera / connection reverse light to monitor
ground/GND wire black 3m +/- inlay cable: connectrion car body direct/GND to camera / car body direct/GND to monitor

Connector cable 20cm +/-:
4 Pin acv-system connector(f) Ø10mm
red: power supply
black: GND
RCA(m) yellow: video

Installation accessories:

camera connection to interfaces:
Relay solid state close 2V-12V/1,5A max > item: 40-AD-REMOTE
camera connection to reversing light:
Rear viev camera voltage stabilizer reverse switch signal > item: 771000-6100

Optional accessory:

Camera cable extension for acv camera 5m > item: 771000-6305
Camera cable extension for acv camera 10m > item: 771000-6310
Camera cable extension for acv camera 15m > item: 771000-6315

Technical data, signals, connections and CAN bus

Voltage and current

• Camera operating voltage: +3 V
• Camera supply voltage: +12 V / +24 V
• Operating voltage: +3 V DC
• Supply voltage: +12 V / +24 V DC > with voltage converter
• Current consumption: 60 mA

Connections and signals

• Red connection: +12 V / +24 V switched, load-stable, fused
• Black connection: chassis ground directly / GND
• RCA (m) yellow: video
• Connection: 4-pin acv system connector (m) Ø 5.2 mm

Jumpers

• Green jumper: enable/disable guidelines
• White jumper: enable/disable mirroring function

Camera features

• Housing: plastic
• Color: black
• Extras: compact design
• Sensor type: 1/3" CMOS
• Imaging system: NTSC color
• Lens: 1.9 mm / F 2.0
• Min. lux: 0.1 lux
• Resolution: 980 x 480 TV lines
• Lens angle: diagonal 170°
• Viewing angle: horizontal 120°, vertical 85° +5°
• Dust and water protected: IP68

Temperature ranges

• Operating temperature range: -20°C to 70°C
• Storage temperature: -40°C to 80°C

Dimensions

• Dimensions (L / W / H): 25.5 mm / 28 mm / 23.5 mm

Cables and adapters

• Camera connection cable 1 m +/-: 4-pin acv system connector (m) Ø 5.2 mm
• Voltage converter +3 V: 4-pin acv system connector (f) Ø 10 mm / 4-pin acv system connector (m) Ø 5.2 mm
• Extension 6.5 m +/-: 4-pin acv system connector (f) Ø 10 mm / 4-pin acv system connector (m) Ø 5.2 mm
• Red power line 3 m +/- through-wired: connection to camera / connection reversing light to monitor
• Black ground/GND line 3 m +/- through-wired: connection chassis ground/GND to camera / connection chassis ground/GND directly to monitor
• Connection cable 20 cm +/-: 4-pin acv system connector (f) Ø 10 mm
• Connection cable 20 cm +/- red: supply voltage
• Connection cable 20 cm +/- black: ground/GND
• Connection cable 20 cm +/- RCA (m) yellow: video

Installation notes

Before installation

Before installation: Check the viewing angle and camera alignment at the installation location using a test monitor.

Electrical connection

• Supply voltage: +12 V / +24 V DC > with voltage converter
• Red connection: +12 V / +24 V switched, load-stable, fused
• Black connection: chassis ground directly / GND
• Red power line 3 m +/- through-wired: connection to camera / connection reversing light to monitor
• Black ground/GND line 3 m +/- through-wired: connection chassis ground/GND to camera / connection chassis ground/GND directly to monitor

Installation accessories

• Camera connection to interfaces: NO relay, electronic, 2 V-12 V / 1.5 A max (Article: 40-AD-REMOTE)
• Camera connection to reversing light: reversing camera voltage stabilizer, reverse signal (Article: 771000-6100)

Important notes

• acv cameras are suitable for continuous operation.
• Camera operating voltage: +3 V
• Connection without voltage converter: +3 V included in the delivery damages the camera.