771000-6702, Rear view camera sub/built-up-construction mini round, ACV

Rear view camera universal mini

Design: round 18,3 mm
Installation: sub-construction / built-up-construction / build-in construction
with guiding lines

Note:

acv cameras are suitable for continuous operation

before installation > check the viewing angle and camera alignment at the installation site with a test monitor

camera operating voltage: +3V
camera power supply: +12V / +24V

connection without voltage converter +3V in scope of delivery damages the camera

connection:
red: +12V / +24V switched load-stable fused
black: car body direct groud/GND

RCA(m) yellow: video

jumper:
green: guiding lines activate/deactivate

Product characteristic:

Design: plastic / metal with wing mount
Color: black
Extras: guiding lines via jumper / different mounting solutions
Image sensor: 1/3" CMOS
TV system: NTSC
Effective pixels: 976 x 592
Lens: 1,9mm / F 2.0
Lux: 0,3
Resolution: 700 TV lines
Lens angle: diagonal 170°
View angle: horizontal 115° vertical 80° + 5°
IP Rating: IP 68
Terminal: 4 Pin acv-system connector(m) Ø5,2 mm
Operating voltage: +3V DC
Power supply: +12V / +24V DC > with voltage converter
Current consumption: 200mA
Operating temperature: -30°C - 75°C
Storage temperature: -40°C - 85°C
Measurements: diameter 16.5 - 18.3 mm depending on the attachment

Pigtail at the camera 1m +/-:
4 Pin acv-system connector(m) Ø5,2mm
1 jumper

Voltage converter +3V:
4 Pin acv-system connector(f) Ø10mm / 4 Pin acv-system connector(m) Ø5,2mm

Extension cable 6,5m +/-:
4 Pin acv-system connector(f) Ø10mm / 4 Pin acv-system connector(m) Ø5,2mm
power wire red 3m +/- inlay cable: connection to camera / connection reverse light to monitor
ground/GND wire black 3m +/- inlay cable: connectrion car body direct/GND to camera / car body direct/GND to monitor

Connector cable 20cm +/-:
4 Pin acv-system connector(f) Ø10mm
red: power supply
black: GND
RCA(m) yellow: video

Installation accessories:

Rear view camera plastic wedge 5° for 771000-6000 > item: 771000-6910

camera connection to interfaces:
Relay solid state close 2V-12V/1,5A max > item: 40-AD-REMOTE
camera connection to reversing light:
Rear viev camera voltage stabilizer reverse switch signal > item: 771000-6100

Optional accessory:

Camera cable extension for acv camera 5m > item: 771000-6305
Camera cable extension for acv camera 10m > item: 771000-6310
Camera cable extension for acv camera 15m > item: 771000-6315

Technical Data, Signals, Connections, and Can-Bus

General Specifications

• Design: round 18.3 mm
• Color: black
• Construction: Plastic / Metal with wing holder
• Mounting type: Underbody / Surface / Built-in
• Extras: Orientation lines via jumper / various mounting options

Technical Specifications

• Sensor Type: 1/3" CMOS
• Image System: NTSC Color
• Effective Pixels: 976 x 592
• Lens: 1.9mm / F 2.0
• Lux: 0.3
• Resolution: 700 TV lines
• Lens Angle: diagonal 170°
• Viewing Angle: horizontal 115° vertical 80° + 5°
• Dust and Water Protection: IP68
• Operating Temperature Range: -30°C - 75°C
• Storage Temperature: -40°C - 85°C
• Diameter: 16.5 - 18.3 mm depending on mounting

Electrical Specifications

• Camera Operating Voltage: +3V DC
• Camera Supply Voltage: +12V / +24V DC > with voltage converter
• Current Consumption: 200mA

Connections

• Connection: red: +12V / +24V switched load-stable secured, black: chassis ground direct/GND, Cinch(m) yellow: Video
• Connection: 4 Pin acv system connector(m) Ø5.2mm
• Connection cable at the camera 1m +/-: 4 Pin acv system connector(m) Ø5.2mm, 1 jumper
• Voltage converter +3V: 4 Pin acv system connector(f) Ø10mm / 4 Pin acv system connector(m) Ø5.2mm
• Extension 6.5m +/-: 4 Pin acv system connector(f) Ø10mm / 4 Pin acv system connector(m) Ø5.2mm, Power line red 3m +/- wired through: Connection to camera / Connection reverse light to monitor, Ground line/GND black 3m +/- wired through: Connection chassis ground/GND to camera / Connection chassis ground/GND direct to monitor
• Connection cable 20cm +/-: 4 Pin acv system connector(f) Ø10mm, red: supply voltage, black: ground/GND, Cinch(m) yellow: Video

Jumper

• Jumper: green: activate/deactivate orientation lines

Installation Instructions

Installation Check

Before installation > Check viewing angle and camera alignment at the installation site with a test monitor

Installation Accessories

• Rearview camera plastic wedge 5° angle for 771000-6000 > Item: 771000-6910

Camera Connection

• Camera connection to interfaces: Electronic relay 2V-12V/1.5A max > Item: 40-AD-REMOTE
• Camera connection to reverse light: Rearview camera voltage stabilizer reverse signal > Item: 771000-6100

Optional Accessories

• Camera cable extension for acv camera 5m > Item: 771000-6305
• Camera cable extension for acv camera 10m > Item: 771000-6310
• Camera cable extension for acv camera 15m > Item: 771000-6315

Important Notes

• acv cameras are suitable for continuous operation
• Connection without voltage converter +3V included damages the camera