771000-6074, Rear view camera Mercedes Vito (W447) with double back doors, ACV

Rear view camera Mercedes

Mercedes Benz Vito (W447) with double back doors 06/2014 - 2023

to replace the OEM 3rd brake light
with guiding lines and adjustable view angle

Note:

acv cameras are suitable for continuous operation

before installation > check the viewing angle and camera alignment at the installation site with a test monitor

camera operating voltage: +12V
camera power supply: +12

connection:
red: +12V switched load-stable fused
black: car body direct ground/GND

RCA(m) yellow: video

jumper:
green: guiding lines activate/deactivate

3re brake light error in informations display:

a: connect OEM lamp in parallel
b: connect load resistor for OEM lamp simulation in parallel in the lighting line +12V <> GND

load resistor value:
10k Ohm
5 Watt min.

make sure that the load resistor can be cooled sufficiently

Product characteristic camera:

Design: plastic
Color: black / red
Extras: guiding lines via jumper / adjustable view angle
Image sensor: 1/3" CMOS
TV system: NTSC
Effective pixels: 976 x 592
Lens: 1,9mm / F 2.0
Resolution: 600 TV lines
Lens angle diagonal: 160° + 5°
View angle: horizontal 115° vertical 75° + 5°
IP Rating: IP68
Terminal: 4 Pin acv-system connector(m) Ø5,2 mm
Operating voltage: +12V DC
Power supply: +12V DC
Operating temperature: -30°C - 75°C
Storage temperature: -40°C - 80°C
Measurements: see 3´rd OEM brake light

Pigtail at the camera 1m +/- :
4 Pin acv-system connector(m) Ø5,2mm
1 jumper

Extension cable 6,5m +/-:
4 Pin acv-system connector(f) Ø10mm / 4 Pin acv-system connector(m) Ø5,2mm
power wire red 3m +/- inlay cable: connection to camera / connection reverse light to monitor
ground/GND wire black 3m +/- inlay cable: connectrion car body direct/GND to camera / car body direct/GND to monitor

Connector cable 20cm +/-:
4 Pin acv-system connector(f) Ø10mm
red: power supply
black: GND
RCA(m) yellow: video

Installation accessories:

camera connection to interfaces:
Relay solid state close 2V-12V/1,5A max > item: 40-AD-REMOTE
camera connection to reversing light:
Rear viev camera voltage stabilizer reverse switch signal > item: 771000-6100

Optional accessory:

Camera cable extension for acv camera 5m > item: 771000-6305
Camera cable extension for acv camera 10m > item: 771000-6310
Camera cable extension for acv camera 15m > item: 771000-6315

Technical Data, Signals, Connections and Can-Bus

Electrical Specifications

• Camera operating voltage: +12V
• Camera supply voltage: +12V

Connections

• Connection: red: +12V switched load-stable fused, black: body ground direct/GND
• Cinch(m) yellow: Video
• Jumper: green: activate/deactivate guide lines
• Connection cable at the camera 1m +/-: 4 Pin acv system connector(m) Ø5.2mm, 1 jumper
• Extension 6.5m +/-: 4 Pin acv system connector(f) Ø10mm / 4 Pin acv system connector(m) Ø5.2mm, power line red 3m +/- wired through: connection to camera / connection reverse light to monitor, ground line/GND black 3m +/- wired through: connection body ground/GND to camera / connection body ground/GND direct to monitor
• Connection cable 20cm +/-: 4 Pin acv system connector(f) Ø10mm, red: supply voltage, black: ground/GND, Cinch(m) yellow: Video

Technical Data

• Camera features: Construction: plastic, Color: black / red, Extras: guide lines / adjustable viewing angle, Sensor type: 1/3" CMOS, Image system: NTSC color, Effective pixels: 976 x 592, Lens: 1.9mm / F 2.0, Resolution: 600 TV lines, Lens angle: 160° + 5°, Viewing angle: horizontal 115° vertical 75° + 5°, Dust and waterproof: IP68, Connection: 4 Pin acv system connector Ø5.2mm, Operating voltage: +12V DC, Supply voltage: +12V DC, Operating temperature range: -30°C - 75°C, Storage temperature: -40°C - 80°C, Dimensions: see OEM brake light

Installation Instructions

• Before installation: Check viewing angle and camera alignment at the installation site with a test monitor
• Lighting error display 3rd brake light in FIS:
  • a: Connect OEM light source in parallel
  • b: Connect load resistor for OEM light source simulation in parallel to the lighting line +12V ground/GND
• Load resistor value: 10k Ohm, 5 Watt min.
• Ensure sufficient cooling possibility of the load resistor

Installation Accessories

• Camera connection to interfaces: Electronic relay 2V-12V/1.5A max > Item: 40-AD-REMOTE
• Camera connection to reverse light: Reversing camera voltage stabilizer reverse signal > Item: 771000-6100

Optional Accessories

• Camera cable extension for acv camera 5m > Item: 771000-6305
• Camera cable extension for acv camera 10m > Item: 771000-6310
• Camera cable extension for acv camera 15m > Item: 771000-6315

Important Notes

acv cameras are suitable for continuous operation