771000-6019, Rear view camera Transporter/Truck ex-proof/stainless steel, ACV

Rear view camera universal

Design: round
Installation: sub-construction / build-up-construction

with different mounting solutions / explosion proof / stainless steel housing / IP69 / guiding lines / night view function

Note:

acv cameras are suitable for continuous operation

before installation > check the viewing angle and camera alignment at the installation site with a test monitor

camera operating voltage: +12V
camera power supply: +12

connection:
red: +12V switched load-stable fused
black: car body direct ground/GND

RCA(m) yellow: video

jumper:
green: guiding lines activate/deactivate

Product characteristic camera:

Design: stainless steel
Color: stainless steel
Extras: explosion proof / guiding lines via jumper / night view function
Image sensor: 1/3" CMOS
TV system: NTSC color
Effective pixels: 976 x 592
Lens: 1,9mm / F 2.0
Min.Lux: 0 Lux with activ night view
Resolution: 600 TV lines
Lens angle: diagonal 130°
View angle: horizontal 100° vertical 65° + 5°
IP Rating: IP69
Terminal: 4 Pin acv-system connector(m) Ø5,2 mm
Operating voltage: +12V DC
Power supply: +12V DC
Current consumption: 300mA during active night view function
Operating temperature: -30°C - 75°C
Storage temperature: -40°C - 85°C
Measurements without bracket: L / W / H - 108 mm / 96 mm / 109,1 mm
Measurements with bracket: L / W / H - 108 mm / 92 mm / 92 mm

Pigtail at the camera 1m+/-:
4 Pin acv-system connector(m) Ø5,2mm
1 jumper

Extension cable 15m +/-:
4 Pin acv-system connector(f) Ø10mm / 4 Pin acv-system connector(m) Ø5,2mm
power wire red 3m +/- inlay cable: connection to camera / connection reverse light to monitor
ground/GND wire black 3m +/- inlay cable: connectrion car body direct/GND to camera / car body direct/GND to monitor

Connector cable 20cm +/-:
4 Pin acv-system connector(f) Ø10mm
red: power supply
black: GND
RCA(m) yellow: video

Installation accessories:

camera connection to interfaces:
Relay solid state close 2V-12V/1,5A max > item: 40-AD-REMOTE
camera connection to reversing light:
Rear viev camera voltage stabilizer reverse switch signal > item: 771000-6100

Optional accessory:

Camera cable extension for acv camera 5m > item: 771000-6305
Camera cable extension for acv camera 10m > item: 771000-6310
Camera cable extension for acv camera 15m > item: 771000-6315

Technical Data, Signals, Connections, and Can-Bus

Design and Installation

• Design: round
• Installation type: Underbody / Mounting

Material and Color

• Construction: Stainless steel
• Color: Stainless steel

Electrical Specifications

• Camera operating voltage: +12V
• Camera supply voltage: +12V
• Operating voltage: +12V DC
• Supply voltage: +12V DC
• Current consumption: 300mA with night vision function on

Connections

• Connection: red: +12V switched, load-stable secured, black: chassis ground direct/GND, Cinch(m) yellow: Video
• Connection: 4 Pin acv system connector Ø5.2mm

Jumper Function

• Jumper: green: activate/deactivate guidelines

Sensor Information

• Sensor Type: 1/3" CMOS

Image System

• Image system: NTSC color

Image Resolution

• Effective pixels: 976 x 592
• Resolution: 600 TV lines

Lens Specifications

• Lens: 1.9mm / F 2.0
• Lens angle: diagonal 130°

Light Sensitivity

• Min. Lux: 0 Lux with active night vision function

Viewing Angle

• Viewing angle: horizontal 100° vertical 65° +5°

Protection Class

• Dust and waterproof: IP69

Temperature Range

• Operating temperature range: -30°C - 75°C
• Storage temperature: -40°C - 85°C

Dimensions

• Dimensions with mounting: L / W / H - 108 mm / 96 mm / 109.1 mm
• Dimensions without mounting: L / W / H - 108 mm / 92 mm / 92 mm

Cables and Connectors

• Connection cable at the camera 1m+/-: 4 Pin acv system connector(m) Ø5.2mm, 1 Jumper
• Extension 15m +/-: 4 Pin acv system connector(f) Ø10mm / 4 Pin acv system connector(m) Ø5.2mm, power line red 3m +/- wired through: connection to camera / connection to reversing light to monitor, ground line/GND black 3m +/- wired through: connection to chassis ground/GND at camera / connection to chassis ground/GND directly to monitor
• Connection cable 20cm +/-: 4 Pin acv system connector(f) Ø10mm, red: supply voltage, black: ground/GND, Cinch(m) yellow: Video

Installation Instructions

Installation Preparation

Before installation > Check viewing angle and camera alignment at the installation site with a test monitor

Installation Accessories

• Camera connection to interfaces: Electronic relay 2V-12V/1.5A max > Item: 40-AD-REMOTE
• Camera connection to reversing light: Rearview camera voltage stabilizer reversing signal > Item: 771000-6100

Optional Accessories

• Camera cable extension for acv camera 5m > Item: 771000-6305
• Camera cable extension for acv camera 10m > Item: 771000-6310
• Camera cable extension for acv camera 15m > Item: 771000-6315

Important Notes

acv cameras are suitable for continuous operation