241250-14-1, 2-DIN facia plate INBAY® Dacia/Fiat/Nissan/Opel/Renault, ACV

Facia plate 2-DIN with INBAY® pocket Dacia / Fiat / Nissan / Opel / Renault

Many car manufacturers install car specific head units to fit the optical picture of the dashboard.

For this reason, you will need one of our facia plates to professionally fit a DIN or Double DIN aftermarket radio into your car.

You probably also need car specific harnesses, antenna adapters, SWC interfaces, camera interfaces or active system adapters.

Note:

vehicles with OEM Sat Nav
vehicles with 2-DIN OEM HU

vehicles with open dash > OEM facia plate vehicles with OEM Sat Nav necessary
vehicles with 1-DIN OEM HU > facia plate vehicles with OEM Sat Nav necessary

Vehicle application:

Dacia
Dacia Dokker (SD) 12/2012 - 11/2020
Dacia Dokker Stepway (SD) 11/2014 - 11/2020
Dacia Duster (SD/SR Facelift) 11/2013 - 07/2021
Dacia Lodgy (SD) 06/2012 - 06/2021
Dacia Lodgy Stepway (SD) 11/2014 - 06/2021
Dacia Logan MCV (SD) 07/2013 - 09/2020
Dacia Sandero (SD) 01/2013 - 09/2020
Dacia Sandero Stepway (SD) 01/2013 - 09/2020

Fiat
Fiat Talento (ZAF 296) 07/2016 - 2021*

Nissan
Nissan NV300 (J4) 11/2016 - 05/2021*

Opel
Opel Movano (X62) 06/2013 - 09/2019**
Opel Vivaro B (X82) 06/2014 - 01/2019**

Renault
Renault Capture (R) 06/2013 - 12/2019****
Renault Master (M) 09/2014 - 09/2019***
Renault Master Z.E. (M) 09/2018 - 06/2020***
Renault Trafic III (E82/F82) 09/2014 - 04/2021***

Colour: black

*vehicles with OEM Sat Nav
**vehicles with mit CD 18BT OEM HU / NAVI 50 INTELLILINK OEM Sat Nav
***vehicles with Connect R & GO OEM HU / MEDIA-NAV OEM Sat Nav
****OEM HU holder must be modified at the bottom

This pocket supports the inductive charging with Inbay®

5 Watt*

All INBAY® products use the Qi standard
This is the worldwide standard for wireless charging
That is why all smartphones which uses the Qi standard are compatible with INBAY®

INBAY® meets the following technical specification:

QI-certification
ECE mark of conformity 10R - 05 14145
EMV Norm VW80000 / TL-965
FOD - "foreign object detection"

No interferences of radio / DAB audio reception
No disruption of the bus system
No harzard for other electronics in vehicle

Note:

connector: ISO(m) > ISO(f)

by using a CAN Bus Interface connect +12V switched power (ignition clamp15) direct to fusebox (fused)

Charging current:

DC5V/1A

*in the case of smartphones with a quick charge function, depending on the apps used parallel with charging, it may only be possible to maintain the charge status