1303-02, ISO Harness Adapter Toyota/Suzuki 28Pin/10Pin Toyota, ACV

ISO Harness Adapter Suzuki / Toyota

ISO adapter cables are used for the passive connection of retrofit devices to the factory plugs present in the radio installation slot.

Depending on the vehicle and equipment, the following signals are provided:

+12V continuous current clamp 30
+12V ignition clamp 15
+12V Light clamp 58
+12V Antenna remote
GND clamp 31
Speaker connection for front and rear speakers

For vehicles with different equipment, signals that are not available may have to be connected to suitable tapping points in the vehicle or additional adaptations/interfaces may have to be used:

CAN bus interfaces
LFB interfaces
Amplified system adapter
Camera adapter

The signals must be checked before connection.

Note:

connector: 28 Pin / 10 Pin Toyota
connector: OEM AUX > RCA(m) white/red
connector: OEM microphone > Jack(m) 3,5mm

check the pin assignment to avoid malfunctions or defects on the vehicle or retrofit device before connecting by measuring

microphone > check for correct assignment with OEM HU before installation
AUX > check for correct assignment with OEM HU before installation

Use case:

HU connector power/speaker

Vehicle application:

Suzuki
Suzuki Across (XA5P) 11/2020 - 2025

Toyota
Toyota Aygo X (AB7) 04/2022 - 2025
Toyota C-HR (X10) 12/2019 - 12/2023
Toyota Corolla (E210) 04/2019 - 01/2023
Toyota Hilux (AN1P) 10/2020 - 2025*
Toyota RAV4 (XA5) 01/2019 - 2023
Toyota Yaris (XP21) 09/2020 - 2025

*vehicles with JBL OEM HU