771324-1037-0, Rear view camera adapter OEM VW different vehicles MIB-PQ, ACV

Rear view camera adapter VW

Rear view camera adapters are required to maintain the OEM rear view camera.

These allow the connection of a factory pre-equipped camera to an aftermarket device with camera input.

Depending on the vehicle and equipment, the adapter provides the video signal RCA, a power supply +6V/ground for the OEM camera and the reversing signal.

Vehicles with a 360° camera system or systems with moving distance lines may not be compatible.

Before installation, check the correct assignment of the adapter to the OEM connector.

Many retrofit devices must be set to the camera function in the menu.

Note:

connector: 52 Pin Quadlock MQS plug
connector: OEM rear view camera > RCA(m) brown

MQS connector B blue:
Pin 6: Video+
Pin 12: Video-

Vehicle application:

Seat
Seat Alhambra II (7N) MJ 2016 - 2021
Seat Arona MJ 2018 - 2021
Seat Ateca (KH7) MJ 2017 - 2021
Seat Ibiza (6P) 2015 - 2017
Seat Ibiza (6F) 2017 - 2021
Seat Leon III (5F) MJ 2013 - 2020
Seat Toledo IV (KG) MJ 2016 - 2019

Skoda
Skoda Fabia III (NJ) MJ 2014 - 2021
Skoda Karoq (NU7) MJ 2018 - 2021
Skoda Kodiaq (NS7) MJ 2017 - 2021
Skoda Octavia 3 (5E) MJ 2012 - 2020
Skoda Rapid (NH1) MJ 2016 - 2019
Skoda Superb 3 (3V) MJ 2015 - 2020
Skoda Yeti MJ 2015 - 2017

VW
VW Amarok MJ 2017 - 2021
VW Arteon (3H) MJ 2018 - 2021
VW Beetle (5C) MJ 2015 - 2019
VW Caravelle 2015 - 2019
VW Crafter (SZ/SY) MJ 2017 - 2021
VW Caddy (2K) MJ 2016 - 2021
VW Golf VII MJ 2012 - 2020
VW Golf VII Sportsvan MJ 2014 - 2020
VW Multivan (T6) MJ 2015 - 2019
VW Passat (B8) MJ 2016 - 2021
VW Polo5 (6C) MJ 2014 - 2017
VW Polo6 (AW1) MJ 2018 - 2021
VW Scirocco 3 (13) MJ 2016 - 2017
VW Sharan (7N) MJ 2016 - 2021
VW T6 2015 - 2015 - 2019
VW T6.1 2019 - 2021
VW T-Cross (C1) 04/2019 - 2021
VW T-Roc (A11) MJ 2018 - 2021
VW Tiguan III (AD1) MJ 2016 - 2021
VW Touran (5T) MJ 2016 - 2021

General installation instructions:

More connections, connection changes, alternative connections, connections of loose cables or connection extensions of loose cables specified in the information text or the manual are for orientation purposes only and for the information of trained specialist instaler.

More connections, changes to the cable configuration of the wiring harness or use of alternative connections or connection extensions:
1: Connections and changes are to be carried out exclusively by trained specialist installer.
2: Connections and modifications must be checked before connection for any manufacturer approvals or manufacturer warranty conditions that may be affected by the modifications.
3: Connections and modifications must be checked for function and correctness by measuring and comparing them with the vehicle's cable assignment diagram before connection.
4: Connections and modifications are made on the user's own responsibility without guarantee of function.
5: Connections and modifications are made on the user's own responsibility without any guarantee of damage to the vehicle, the retrofit device or the interface.
6: Modifications to the pre-assembled wiring harness may invalidate the product's warranty.

Technical Data, Signals, Connections, and Can-Bus

Technical Specifications

Depending on the vehicle and equipment, the adapter provides the video signal via Cinch, a +6V/ground power supply for the OEM camera, and the reverse signal.

Connections

• Connection: 52 Pin Quadlock MQS connector strip
• Connection: OEM rearview camera > Cinch(m) brown
• MQS connector B blue: Pin 6: Video+ Pin 12: Video-

Installation Instructions

Installation Preparation

Before installation, the correct pin assignment of the adapter with the OEM connection must be checked. Many aftermarket devices need to be set to the camera function in the menu.

Installation Notes

• Connections, connection changes, alternative connections, connections of loose cables, or connection extensions of loose cables specified in the note text or the operating instructions are for orientation and information for trained professionals only.
• Connections and changes must be carried out exclusively by trained professionals.
• Connections and changes must be checked for possible manufacturer approvals or warranty conditions potentially affected by the changes before connection.
• Connections and changes must be checked for function and correctness by measuring and comparing with the vehicle's wiring diagram before connection.
• Connections and changes are made at one's own responsibility without a guarantee of function.
• Connections and changes are made at one's own responsibility without a guarantee for damage to the vehicle, the retrofit device, or the interface.
• Changes to the pre-assembled wiring harness may void the product warranty.