771300-1030-0, Rear view camera adapter Toyota OEM camera 16Pin, ACV

Technical Data, Signals, Connections, and Can-Bus

Signal and Power Supply

Depending on the vehicle and equipment, the adapter provides the video signal Cinch, a power supply +6V/ground for the OEM camera, and the +12V reverse signal, or this must be connected at a suitable location in the vehicle.

Connections

• Connection: 16 Pin Toyota connector
• Connection: OEM rearview camera > Cinch(m) yellow camera input
• Connection: red: +12V reverse signal secured
• Connection: black: ground terminal 31

Power Supply

Camera supply voltage: +6V

Installation Instructions

Checking the Assignment

Before installation, the correct assignment of the adapter with the OEM connection must be checked. +6V supply voltage > check the correct assignment with the factory device by measuring before installation.

Setting the Aftermarket Devices

Many aftermarket devices must be set to the camera function in the menu.

Installation Notes

The connections, connection changes, alternative connections, connections of loose cables, or connection extensions of loose cables specified in the note text or the operating instructions are exclusively for orientation and information for trained professionals.

1. Connections and changes are to be carried out exclusively by trained professionals.
2. Connections and changes must be checked for possible manufacturer approvals or for manufacturer warranty conditions that may be affected by the changes before connection.
3. Connections and changes must be checked for function and correctness by measuring and comparing with the vehicle's wiring diagram before connection.
4. Connections and changes are made at one's own responsibility without guarantee of function.
5. Connections and changes are made at one's own responsibility without guarantee of damage to the vehicle, the aftermarket device, or the interface.
6. Changes to the pre-assembled wiring harness may void the product warranty.