771190-9001, Rear view camera Mercedes Citan/Renault Kangoo, ACV

Rear view camera Mercedes / Renault

Mercedes Citan (W415) 01/2012 - 08/2021

Renault Kangoo (W) 03/2013 - 12/2020
Renault Kangoo Rapid (W) 03/2013 - 05/2021
Renault Kangoo Z.E. (W) 05/2013 - 05/2021

to replace the OEM 3rd brake light diffuser

with guiding lines / adjustable view angle

Note:

acv cameras are suitable for +12V continuous operation

before installation > check the viewing angle and camera alignment at the installation site with a test monitor

camera operating voltage: +3V
camera power supply: +12V / +24V

connection without voltage converter +3V in scope of delivery damages the camera

vehicles with single back door
vehicles with double rear door

connection:
red +12V / +24V switched load-stable fused
black ground car body direct

RCA(m) yellow: video

jumper:
green: guiding lines activate/deactivate

Product characteristic camera:

Design: plastic with metal bracket
Color: black
Extras: guiding lines via jumper / adjustable view angle
Image sensor: 1/4" CMOS
TV system: NTSC
Effective pixels: 720 x 576
Lens: 1,9mm / F 2.0
Resolution: 420 TV lines
Lens angle: diagonal 140°
View angle: horizontal 115° vertical 80° + 5°
IP Rating: IP 68
Terminal: 4 Pin acv-system connector(m) Ø5,2 mm
Operating voltage: +3V DC
Power supply: +12V / +24V DC > with voltage converter
Current consumption: 60mA
Operating temperature: -30°C - 75°C
Storage temperature: -40°C - 80°C
Measurements: OEM break light diffuser

Pigtail at the camera +/-:
4 Pin acv-system connector(m) Ø5,2mm
1 jumper

Voltage converter +3V:
4 Pin acv-system connector(f) Ø10mm / 4 Pin acv-system connector(m) Ø5,2mm

Extension cable 6,5m +/-:
4 Pin acv-system connector(f) Ø10mm / 4 Pin acv-system connector(m) Ø5,2mm
power wire red 3m +/- inlay cable: connection to camera / connection reverse light to monitor
ground/GND wire black 3m +/- inlay cable: connectrion car body direct/GND to camera / car body direct/GND to monitor

Connector cable 20cm +/-:
4 Pin acv-system connector(f) Ø10mm
red: power supply
black: GND
RCA(m) yellow: video

Installation accessories:

camera connection to interfaces:
Relay solid state close 2V-12V/1,5A max > item: 40-AD-REMOTE
camera connection to reversing light:
Rear viev camera voltage stabilizer reverse switch signal > item: 771000-6100

Optional accessory:

Camera cable extension for acv camera 5m > item: 771000-6305
Camera cable extension for acv camera 10m > item: 771000-6310
Camera cable extension for acv camera 15m > item: 771000-6315

Technical Data, Signals, Connections and Can-Bus

Technical Data

• Camera operating voltage: +3V
• Camera supply voltage: +12V / +24V
• Camera features:
  • Construction: Plastic with metal bracket
  • Color: black
  • Extras: Guide lines via jumper / adjustable viewing angle
  • Sensor type: 1/4" CMOS
  • Image system: NTSC color
  • Effective pixels: 720 x 576
  • Lens: 1.9mm / F 2.0
  • Resolution: 420 TV lines
  • Lens angle: diagonal 140°
  • Viewing angle: horizontal 115° vertical 80° + 5°
  • Dust and water protected: IP68
  • Connection: 4 Pin acv system connector Ø5.2mm
  • Operating voltage: +3V DC
  • Supply voltage: +12V / +24V DC > with voltage converter
  • Current consumption: 60mA
  • Operating temperature range: -30°C - 75°C
  • Storage temperature: -40°C - 80°C
  • Dimensions: OEM brake light

Connections

• Connection: red: +12V / +24V switched load stable secured, black: body ground direct/GND, Cinch(m) yellow: Video
• Jumper: green: activate/deactivate guide lines
• Connection cable at the camera 1m +/-: 4 Pin acv system connector(m) Ø5.2mm, 1 jumper
• Voltage converter +3V: 4 Pin acv system connector(f) Ø10mm / 4 Pin acv system connector(m) Ø5.2mm
• Extension 6.5m +/-: 4 Pin acv system connector(f) Ø10mm / 4 Pin acv system connector(m) Ø5.2mm, Power line red 3m +/- wired through: Connection to camera / Connection reverse light to monitor, Ground line/GND black 3m +/- wired through: Connection body ground/GND to camera / Connection body ground/GND direct to monitor
• Connection cable 20cm +/-: 4 Pin acv system connector(f) Ø10mm, red: supply voltage, black: ground/GND, Cinch(m) yellow: Video

Installation Instructions

Before installation > Check viewing angle and camera alignment at the installation site with a test monitor.

Installation Accessories

• Camera connection to interfaces: Electronic relay 2V-12V/1.5A max > Item: 40-AD-REMOTE
• Camera connection to reverse light: Reverse camera voltage stabilizer reverse signal > Item: 771000-6100

Optional Accessories

• Camera cable extension for acv camera 5m > Item: 771000-6305
• Camera cable extension for acv camera 10m > Item: 771000-6310
• Camera cable extension for acv camera 15m > Item: 771000-6315

Important Notes

• acv cameras are suitable for connection +12V continuous operation.
• Connection without voltage converter +3V included damages the camera.