771178-1032, Rear view camera adapter 16Pin/24Pin Kia OEM camera, ACV

Rear view camera adapter Kia

Rear view camera adapters are required to maintain the OEM rear view camera.

These allow the connection of a factory pre-equipped camera to an aftermarket device with camera input.

Depending on the vehicle and equipment, the adapter provides the video signal RCA, a power supply +6V/ground for the OEM camera and the reversing signal.

Vehicles with a 360° camera system or systems with moving distance lines may not be compatible.

Before installation, check the correct assignment of the adapter to the OEM connector.

Many retrofit devices must be set to the camera function in the menu.

Note:

connector: 16 Pin Kia
connector: 24 Pin Kia
connection: OEM rear view camera > RCA(m) yellow camera input

red: +12V reverse gear signal input
purple: +12V reverse gear signal output if available
black: GND clamp 31

before installation:

check connection +6V supply voltage and video signal for correct assignment with factory HU

Vehicle application:

Kia Carens (RP) 05/2013 - 10/2016
Kia Carens (RP) 11/2016 - 12/2018
Kia Cee'd (JD) 09/2015 - 06/2018
Kia Pro-Cee'd (JD) 09/2015 - 06/2018
Kia Sportage (SL) 03/2014 - 01/2016

Technical Data, Signals, Connections, and Can-Bus

Signal and Power Supply

Depending on the vehicle and equipment, the adapter provides the video signal via Cinch, a +6V power supply/ground for the OEM camera, and the reverse signal.

Connections

• Connection: 16 Pin Kia connector
• Connection: 24 Pin Kia connector
• Connection: OEM rearview camera > Cinch(m) yellow camera input

Signals

• red: +12V reverse signal input
• purple: +12V reverse signal output if available
• black: ground GND terminal 31

Installation Instructions

Installation Preparation

Before installation, check the correct pin assignment of the adapter with the OEM connection. Before installation: Check the +6V power supply and video signal for correct pin assignment with the factory device.

Device Settings

Many aftermarket devices need to be set to the camera function in the menu.