771094-9002, Rear view camera/monitor Kit2 Citroen/Opel/Fiat/Peugeot, ACV

Rear view camera Mirror moitor Kit 2 Citroen / Fiat / Opel / Peugeot / Toyota

Camera to replace the OEM 3rd brake light diffuser at vehicles with interior accessories:
with guiding lines / night view function / adjustable view angle 20°

Monitor to replace the OEM mirror:
4,3" / 2 video inputs / self dimming

Vehicle specific bracket for mirror monitor Citroen / Fiat /Ford / Opel / Peugeot

Note:

acv cameras are suitable for +12V continuous operation

before installation > check the viewing angle and camera alignment at the installation site with a test monitor

camera operating voltage: +12V
camera power supply: +12

vehicles with interior trim > Motor Home/tool and gear truck:
assembly by replacing the OEM brake light diffuser
installation without the need of screwing into the trunk or interior

connection camera:
red: +12V switched load-stable fused
black: GND clamp 31 car body direct

RCA(m) yellow: video

cable loop:
green: cut/connect guiding lines activate/deactivate

connection monitor:
red: +12V ignition current clamp 15 load stable fused
black: GND clamp 31 car body direct
green: +12V trigger switch video rear view camera

video in: 2 x RCA(f) yellow

for selection compare the OEM mount on the windscreen and the the OEM mirror base with the product illustration of the bracket
the OEM mirror base cover must be adjusted manually using workshop tools if necessary

Vehicle application:

Citroen
Citroen Jumper (250) 10/2006 - 11/2011
Citroen Jumper (250) 11/2011 - 05/2014
Citroen Jumper (250) 05/2014 - 10/2022
Citroen Jumper (250) 10/2022 - 06/2024
Citroen Jumper (250) 07/2024 -2026
Citroen e-Jumper (250) 10/2021 - 06/2024
Citroen e-Jumper (250) 07/2024 -2026
Citroen Relay (250) 2006- 2024

Fiat
Fiat Ducato (ZAF 250) 06/2006 - 06/2011
Fiat Ducato (ZAF 250) 06/2011 - 05/2014
Fiat Ducato (ZAF250) 05/2014 - 03/2021
Fiat Ducato (ZAF 250) 11/2021 - 11/2023
Fiat Ducato (ZAF 250) 11/2023 - 2026
Fiat e-Ducato (ZAF 250) 04/2021 - 03/2024
Fiat e-Ducato (ZAF 250) 03/2024 -2026

Opel
Opel Movano Cargo C (Y) 10/2021 - 01/2024
Opel Movano Cargo C (Y) 01/2024 - 2026
Opel Movano Electric Cargo C (Y) 10/2021 - 01/2024
Opel Movano Electrik Cargo C (Y) 01/2024 - 2026

Peugeot
Peugeot Boxer (Y) 02/2007 - 07/2011
Peugeot Boxer (Y) 07/2011 - 05/2014
Peugeot Boxer (Y) 09/2014 - 12/2019
Peugeot Boxer (Y) 08/2018 - 06/2024
Peugeot Boxer (Y) 07/2024 - 2026
Peugeot e-Boxer (Y) 10/2021 - 06/2024
Peugeot e-Boxer (Y) 07/2024 - 2026 Toyota
Toyota Proace Max (T) 08/2024 - 2026
Toyota Proace Max Electric (T) 01/2025 - 2026

Product characteristic camera:

Design: plastic
Color: black / red
Extras: guiding lines via cable loop / nightview / adjustable view angle 20°
Image sensor: 1/3" CMOS
TV system: NTSC
Effective pixels: 976 x 592
Lens: 1,9mm / F 2.0
Min.Lux: 0 Lux with active nightview
Resolution: 600 TV lines
Lens angle: diagonal 160°
View angle: horizontal 115° vertical 75° +5°
IP Rating: IP68
Terminal: 4 Pin system connector(m)
Operating voltage: +12V DC
Power supply: +12V DC
Current consumption: 150mA during active night vision function
Operating temperature: -30°C - 75°C
Storage temperature: -40°C - 80°C
Measurements: OEM 3rd brakelight

Pigtail at the camera 50cm +/-:
4 Pin system connector(m)
1 cable loop

Adapter harness 20cm +/-:
4 Pin system connector(f) > 4 Pin acv-system connector(m)

Extension cable 15m +/-:
4 Pin acv-system connector(f) Ø10mm / 4 Pin acv-system connector(m) Ø5,2mm
power wire red 3m +/- inlay cable: connection to camera / connection reverse light to monitor
ground/GND wire black 3m +/- inlay cable: connectrion car body direct/GND to camera / car body direct/GND to monitor

Connector cable 20cm +/-:
4 Pin acv-system connector(f) Ø10mm
red: power supply
black: GND
RCA(m) yellow: video

Product characteristics monitor:

Design: plastic with metal bracket

Color: black

Extras: self dimming / automatically adjusts brightness of monitor / automatically switches on via trigger wire

Input: 2 x video > video/rear view camera

Resolution: 480 x 272

Aspect ratio: 16:9

Brightness: 1000-1200 lux

Video System: PAL/NTSC (automatically identification)

Power supply: DC 12V

Current consumption: max. 400mA

Operating temperature: -20°C up to +75°C

Storage temperature: -40°C up to +85°C

Measurements: L / W / H 270mm / 85mm / 50mm (without bracket)

Installation accessories:

camera connection to interfaces:
Relay solid state close 2V-12V/1,5A max > item: 40-AD-REMOTE
camera connection to reversing light:
Rear viev camera voltage stabilizer reverse switch signal > item: 771000-6100

Optional accessory:

Camera cable extension for acv camera 5m > item: 771000-6305
Camera cable extension for acv camera 10m > item: 771000-6310
Camera cable extension for acv camera 15m > item: 771000-6315

Scope of delivery Kit:

Rear view camera Citroen/Opel/Fiat/Peugeot 3rd break light > item: 771000-6062
Mirror monitor 4.3" 2x video input self dimming > item: 771000-6511
Mirror replacement bracket Citroen/Fiat/Ford/Opel/Peugeot > item: 771000-6922

Technical Data, Signals, Connections and Can-Bus

Camera Technology

• Camera operating voltage: +12V
• Camera supply voltage: +12V
• Camera features: Construction: Plastic, Color: black / red, Extras: Guidelines via cable loop / Night vision function / Adjustable viewing angle 20°, Sensor type: 1/3" CMOS, Image system: NTSC color, Effective pixels: 976 x 572, Lens: 1.9mm / F 2.0, Min.Lux: 0 with active night vision function, Resolution: 600 TV lines, Lens angle: diagonal 160°, Viewing angle: horizontal 115° vertical 75° +5°, Dust and waterproof: IP68, Connection: 4 pin system connector(m), Operating voltage: +12V DC, Supply voltage: +12V DC, Current consumption: 150mA with night vision function on, Operating temperature range: -30°C - 75°C, Storage temperature: -40°C - 80°C, Dimensions: OEM brake light

Camera Connections

• Camera connection: red: +12V switched load-stable fused, black: Ground/GND terminal 31 body direct, Cinch(m) yellow: Video
• Cable loop: green: disconnect/connect to activate/deactivate guidelines
• Connection cable at the camera 50cm +/-: 4 pin system connector(m), 1 cable loop
• Connection adapter 20cm +/-: 4 pin system connector(f) > 4 pin acv-system connector(m) Ø5.2mm
• Extension 15m +/-: 4 pin acv-system connector(f) Ø10mm / 4 pin acv-system connector(m) Ø5.2mm, Power line red 3m +/- through-wired: Connection to camera / Connection reverse light to monitor, Ground line/GND black 3m +/- through-wired: Connection body ground/GND to camera / Connection body ground/GND direct to monitor
• Connection cable 20cm +/-: 4 pin acv-system connector(f) Ø10mm, red: Supply voltage, black: Ground/GND, Cinch(m) yellow: Video

Monitor Technology

• Monitor features: Construction: Plastic with metal holder, Color: black, Extras: Extremely bright / Automatic brightness control for monitor / Automatic activation via trigger function / Remote control / Guidelines deactivatable and adjustable, Inputs: 2 video (Video/Rearview camera), Resolution: 480 x 272, Image format: 16:9, Brightness: 2000-2600 Lux, Video system: PAL/NTSC (automatic detection), Supply voltage: 12Volt DC, Current consumption: max. 400mA, Operating temperature range: -20°C to +75°C, Storage temperature: -40°C to +85°C, Dimensions: L / W / H / 270mm / 85mm / 50mm (without holder)

Monitor Connections

• Monitor connection: red: +12V ignition current terminal 15 load-stable fused, black: Ground/GND terminal 31 body direct, green: +12V trigger signal video switching rearview camera
• Video In: 2 x Cinch(f) yellow

Installation Instructions

Installation Preparation

Before installation > Check viewing angle and camera alignment at the installation site with a test monitor

Installation Notes

• Vehicles with interior fittings > Motorhomes/Workshop vehicles: Installation by replacing the OEM lens of the brake light
• Installation without screwing through the cargo area/interior
• Compare the OEM mount on the windshield and the OEM mirror base with the product images of the holder
• If necessary, the OEM mirror base cover must be manually adjusted with workshop tools

Installation Accessories

• Camera connection to interfaces: Electronic relay 2V-12V/1.5A max > Item: 40-AD-REMOTE
• Camera connection to reverse light: Rearview camera voltage stabilizer reverse signal > Item: 771000-6100

Optional Accessories

• Camera cable extension for acv camera 5m > Item: 771000-6305
• Camera cable extension for acv camera 10m > Item: 771000-6310
• Camera cable extension for acv camera 15m > Item: 771000-6315

Important Notes

acv cameras are suitable for continuous operation