771000-6712, Rear view camera sub-construction foursquared, ACV

Rear view camera universal

Design: foursquared
Installation: sub-construction

with with guiding lines / mirror function / snap in fixing

Note:

acv cameras are suitable for continuous operation

before installation > check the viewing angle and camera alignment at the installation site with a test monitor

camera operating voltage: +3V
camera power supply: +12V / +24V

connection without voltage converter +3V in scope of delivery damages the camera

connection:
red: +12V / +24V switched load-stable fused
black: car body direct groud/GND

RCA(m) yellow: video

jumper:
green: guiding lines activate/deactivate
white: mirror function activate/deactivate

Product characteristic camera:

Design: plastic with 22mm drill hole
Color: black
Extras: guiding lines via jumper / mirror function via jumper / snap in fixing
Image sensor: 1/3" PC2099 CMOS
TV system: NTSC
Resolution: 960 x 480
Lux: 0,1
TV lines: 600 TV lines CVBS D1
Lens angle: diagonal 170°
View angle: horizontal 120° / vertical 85° +5°
IP Rating: IP68
Terminal: 4 Pin acv-system connector(m) Ø5,2 mm
Operating voltage: +3V DC
Power supply: +12V / +24V DC > with voltage converter
Current consumption: 60mA
Operating temperature: -20°C - 77°C
Storage temperature: -40°C - 85°C
Measurements: L / W / H - 34mm / 29mm / 34mm total
Drill hole: Ø 22mm

Pigtail at the camera 1m +/-:
4 Pin acv-system connector(m) Ø5,2mm
2 jumper

Voltage converter +3V:
4 Pin acv-system connector(f) Ø10mm / 4 Pin acv-system connector(m) Ø5,2mm

Extension cable 6,5m +/-:
4 Pin acv-system connector(f) Ø10mm / 4 Pin acv-system connector(m) Ø5,2mm
power wire red 3m +/- inlay cable: connection to camera / connection reverse light to monitor
ground/GND wire black 3m +/- inlay cable: connectrion car body direct/GND to camera / car body direct/GND to monitor

Connector cable 20cm +/-:
4 Pin acv-system connector(f) Ø10mm
red: power supply
black: GND
RCA(m) yellow: video

Installation accessories:

camera connection to interfaces:
Relay solid state close 2V-12V/1,5A max > item: 40-AD-REMOTE
camera connection to reversing light:
Rear viev camera voltage stabilizer reverse switch signal > item: 771000-6100

Optional accessory:

Camera cable extension for acv camera 5m > item: 771000-6305
Camera cable extension for acv camera 10m > item: 771000-6310
Camera cable extension for acv camera 15m > item: 771000-6315

Technical Data, Signals, Connections, and Can-Bus

General Specifications

• Design: square
• Mounting type: underbody
• Color: black
• Construction: plastic with 22mm borehole
• Dimensions: L / W / H - 34.7mm / 29.8mm / 34.99mm total height
• Borehole: Ø 22mm
• Dust and waterproof: IP68

Electrical Specifications

• Camera operating voltage: +3V DC
• Camera supply voltage: +12V / +24V DC > with voltage converter
• Current consumption: 60mA
• Operating temperature range: -20°C - 70°C
• Storage temperature: -40°C - 85°C

Functions

• With orientation lines / mirroring function / snap-in mounting
• Jumper: green: activate/deactivate orientation lines, white: activate/deactivate mirroring function
• Extras: orientation lines via jumper / mirroring function via jumper / snap-in mounting

Image and Sensor Technology

• Sensor type: 1/3" CMOS
• Image system: NTSC color
• Resolution: 960 x 480
• Lux: 0.1
• TV Lines: 600 TV lines CVBS D1
• Lens angle: diagonal 170°
• Viewing angle: horizontal 120° / vertical 85° +5°

Connections

• Connection: red: +12V / +24V switched load-stable secured, black: direct chassis ground/GND, Cinch(m) yellow: video
• Connection: 4 Pin acv system connector(m) Ø5.2mm
• Connection cable at the camera 1m +/-: 4 Pin acv system connector(m) Ø5.2mm, 2 jumpers
• Voltage converter +3V: 4 Pin acv system connector(f) Ø10mm / 4 Pin acv system connector(m) Ø5.2mm
• Extension 6.5m +/-: 4 Pin acv system connector(f) Ø10mm / 4 Pin acv system connector(m) Ø5.2mm, power line red 3m +/- wired through: connection to camera / connection reverse light to monitor, ground line/GND black 3m +/- wired through: connection chassis ground/GND to camera / connection chassis ground/GND directly to monitor
• Connection cable 20cm +/-: 4 Pin acv system connector(f) Ø10mm, red: supply voltage, black: ground/GND, Cinch(m) yellow: video

Installation Instructions

Preparation

Before installation > check viewing angle and camera alignment at the installation site with a test monitor

Installation Accessories

• Camera connection to interfaces: electronic relay 2V-12V/1.5A max > Item: 40-AD-REMOTE
• Camera connection to reverse light: rearview camera voltage stabilizer reverse signal > Item: 771000-6100

Optional Accessories

• Camera cable extension for acv camera 5m > Item: 771000-6305
• Camera cable extension for acv camera 10m > Item: 771000-6310
• Camera cable extension for acv camera 15m > Item: 771000-6315

Important Notes

• acv cameras are suitable for continuous operation
• Connection without voltage converter +3V included damages the camera