771000-6710, Rear view camera Transporter/Motorhome shutter/heating, ACV

Rear view camera shutter universal

Design: Transporter / Motorhome
Installation: build-up-construction / roof system

with camera heating / night view function / automatic shutter function

Note:

acv cameras are suitable for continuous operation

before installation > check the viewing angle and camera alignment at the installation site with a test monitor

camera operating voltage: +12V
camera power supply: +12

connection:
red: +12V switched load-stable fused
black: ground car body direct/GND
yellow: +12V trigger for shutterfunction open/close

RCA(m) yellow: video
RCA(m) red/white: not connected

Product characteristic:

Design: bracket metal / camera body aluminium alloy / shutter aluminium alloy
Color: black / silver
Extras: autmatic shutter function / camera heating / night view
TV system: NTSC
Effective pixels: 752 x 582
Lux: 0 lux with activ night view
Nightview: 10 meter
Resolution: 600 TV lines
View angle: horizontal 100° vertical 65° +5°
IP Rating: IP 68
Terminal: 6 Pin system plug(m)
Operating voltage: +12V DC
Power supply: +12V DC
Current consumption: 300mA with activ shutter
Operating temperature: -20°C - 70°C
Storage temperature: -40°C - 85°C
Measurements: L / W / H - 120mm / 75mm / 100mm

Pigtail at the camera cm +/-:
6 Pin system plug(m)

Extension cable 15m +/-:
6 Pin system connector(f) / 6 Pin system connector(m)
power wire red 3m +/- inlay cable: connection to camera / connection reverse light to monitor
ground/GND wire black 3m +/- inlay cable: connectrion car body direct/GND to camera / car body direct/GND to monitor

Connector cable 1,7m +/-:
6 Pin system connector(f)
red: +12V power supply
black: GND
yellow: trigger
RCA(m) yellow: video

Installation accessories:

camera connection to interfaces:
Relay solid state close 2V-12V/1,5A max > item: 40-AD-REMOTE
camera connection to reversing light:
Rear viev camera voltage stabilizer reverse switch signal > item: 771000-6100

Technical Data, Signals, Connections, and Can-Bus

Camera Functions

• With camera heating
• Night vision function
• Automatic shutter function

Voltage Requirements

• Camera operating voltage: +12V
• Camera supply voltage: +12V
• Operating voltage: +12V DC
• Supply voltage: +12V DC

Connection Details

• Connection: red: +12V switched, load-stable secured, black: chassis ground direct/GND, yellow: +12V trigger for shutter function open/close
• RCA(m) yellow: video, RCA(m) red/white: not assigned
• Connection: 6-pin system connector(m)

Material and Construction

• Construction: bracket metal / camera housing aluminum / shutter aluminum
• Color: black / silver

Sensor Type

• Sensor type: 1/3" SHARP CCD

Image System

• Image system: NTSC color

Image Resolution

• Effective pixels: 752 x 582
• Resolution: 600 TV lines

Light Sensitivity

• Min. Lux: 0 Lux with active night vision function

Night Vision Range

• Night vision: 10 meters

Viewing Angle

• Viewing angle: horizontal 100° vertical 65° +5°

Protection Class

• Dust and waterproof: IP68

Current Consumption

• Current consumption: max. 300mA with active shutter

Operating Temperature Range

• Operating temperature range: -20°C - 70°C

Storage Temperature Range

• Storage temperature: -40°C - 85°C

Dimensions

• Dimensions: L / W / H - 120mm / 75mm / 100mm

Connection Cables

• Connection cable at the camera 90cm +/-: 6-pin system connector(m)
• Connection cable 1.7m +/-: 6-pin system connector(f), red: +12V supply voltage, black: ground/GND, yellow: trigger, RCA(m) yellow: video

Extension Cable

• Extension 15m +/-: 6-pin system connector(f) / 6-pin system connector(m), power line red 3m +/- wired through: connection to camera / connection to reversing light to monitor, ground line/GND black 3m +/- wired through: connection to chassis ground/GND to camera / connection to chassis ground/GND direct to monitor

Installation Instructions

Mounting Type

• Mounting type: attachment / roof mounting

Installation Preparation

• Before installation > check viewing angle and camera alignment at the installation site with a test monitor

Installation Accessories

• Camera connection to interfaces: electronic relay 2V-12V/1.5A max > Item: 40-AD-REMOTE
• Camera connection to reversing light: reversing camera voltage stabilizer reversing signal > Item: 771000-6100

Important Notes

acv cameras are suitable for continuous operation