771000-6073, Rear view camera VW T5/T6/T6.1 with double back doors, ACV

Rear view camera VW

VW Caravelle (7H) 10/2004 - 09/2009 with double back doors
VW Caravelle (7H) 09/2009 - 05/2015 with double back doors
VW Multivan (7H) 02/2003 - 09/2009 with double back doors
VW Multivan (7H) 09/2009 - 05/2015 with double back doors
VW T5 Transporter (7H) 08/2003 - 09/2009 with double back doors
VW T5 Transporter (7H) 09/2009 - 05/2015 with double back doors
VW T6 (7HC) 07/2015 - 08/2019 with double back doors
VW T6.1 (7HC) 11/2019 - 10/2020with double back doors*

to replace the 3rd brake light
with guiding lines / adjustable view angle

Note:

acv cameras are suitable for continuous operation

before installation > check the viewing angle and camera alignment at the installation site with a test monitor

camera power supply: +12V

vehicles with double back doors

installation with OEM bulb and OEM screw holder / white screw insert and spring

connection:
red: +12V switched load-stable fused
black: car body direct groud/GND

RCA(m) yellow: video

jumper:
green: guiding lines activate/deactivate

*vehicles without bulbs bonded to the OEM brake light

Product characteristic camera:

Design: plastic
Color: black / red
Extras: guiding lines via jumper / adjustable view angle
Image sensor: 1/3" CMOS
TV system: NTSC
Effective pixels: 976 x 592
Lens: 1,9mm / F 2.0
Resolution: 600 TV lines
Lens anglel: diagona 160° + 5°
View angle: horizontal 115° / vertical 75° + 5°
Rating: IP68
Terminal: 4 Pin acv-system connector(m) Ø5,2 mm
Operating voltage: +12V DC
Power supply: +12V
Operating temperature: -30°C - 75°C
Storage temperature: -40°C - 80°C
Measurements: OEM brake light

Pigtail at the camera 1m +/-:
4 Pin system connector(m)
1 jumper

Adapter harness:
4 Pin system connector(f) / 4 Pin acv-system connector(m) Ø5,2mm

Extension cable 6,5m +/-:
4 Pin acv-system connector(f) Ø10mm / 4 Pin acv-system connector(m) Ø5,2mm
power wire red 3m +/- inlay cable: connection to camera / connection reverse light to monitor
ground/GND wire black 3m +/- inlay cable: connectrion car body direct/GND to camera / car body direct/GND to monitor

Connector cable 20cm +/-:
4 Pin acv-system connector(f) Ø10mm
red: power supply
black: GND
RCA(m) yellow: video

Installation accessories:

camera connection to interfaces:
Relay solid state close 2V-12V/1,5A max > item: 40-AD-REMOTE
camera connection to reversing light:
Rear viev camera voltage stabilizer reverse switch signal > item: 771000-6100

Optional accessory:

Camera cable extension for acv camera 5m > item: 771000-6305
Camera cable extension for acv camera 10m > item: 771000-6310
Camera cable extension for acv camera 15m > item: 771000-6315

Technical Data, Signals, Connections and Can-Bus

Technical Data

• Camera supply voltage: +12V
• Camera product features:
  • Construction: Plastic
  • Color: black / red
  • Extras: Orientation lines / adjustable viewing angle
  • Sensor type: 1/3" CMOS
  • Image system: NTSC color
  • Effective pixels: 976 x 592
  • Lens: 1.9mm / F 2.0
  • Resolution: 600 TV lines
  • Lens angle: diagonal 160° + 5°
  • Viewing angle: horizontal 115° / vertical 75° + 5°
  • Dust and water protected: IP68
  • Connection: 4 Pin acv system connector(m) Ø5.2mm
  • Operating voltage: +12V DC
  • Supply voltage: +12V
  • Operating temperature range: -30°C - 75°C
  • Storage temperature: -40°C - 80°C
  • Dimensions: OEM brake light

Connections

• Connection: red: +12V switched load-stable fused, black: chassis ground direct/GND, Cinch(m) yellow: video
• Jumper: green: activate/deactivate orientation lines
• Connection cable at the camera 1m +/-: 4 Pin system connector(m), 1 jumper
• Adapter cable: 4 Pin system connector(f) / 4 Pin acv system connector(m) Ø5.2mm
• Extension 6.5m +/-: 4 Pin acv system connector(f) Ø10mm / 4 Pin acv system connector(m) Ø5.2mm, power line red 3m +/- wired through: connection to camera / connection reverse light to monitor, ground line/GND black 3m +/- wired through: connection chassis ground/GND to camera / connection chassis ground/GND direct to monitor
• Connection cable 20cm +/-: 4 Pin acv system connector(f) Ø10mm, red: supply voltage, black: ground/GND, Cinch(m) yellow: video

Installation Instructions

Before installation > check viewing angle and camera alignment at the installation site with a test monitor.

Installation with OEM light bulb and OEM screw mount / white screw insert and spring.

Installation Accessories

• Camera connection to interfaces: electronic relay 2V-12V/1.5A max > Item: 40-AD-REMOTE
• Camera connection to reverse light: reversing camera voltage stabilizer reverse signal > Item: 771000-6100

Optional Accessories

• Camera cable extension for acv camera 5m > Item: 771000-6305
• Camera cable extension for acv camera 10m > Item: 771000-6310
• Camera cable extension for acv camera 15m > Item: 771000-6315

Important Notes

acv cameras are suitable for continuous operation.

Vehicles without OEM brake light bonded light bulbs.