771000-6070, Rear view camera VW T5(7H)/T6(7HC) with single back door, ACV

Rear view camera VW

VW Caravelle (7H) 10/2004 - 09/2009 with single backdoor
VW Caravelle (7H) 09/2009 - 05/2015 with single backdoor
VW Multivan (7H) 02/2003 - 09/2009 with single backdoor
VW Multivan (7H) 09/2009 - 05/2015 with single backdoor
VW T5 Transporter (7H) 08/2003 - 09/2009 with single backdoor
VW T5 Transporter (7H) 09/2009 - 05/2015 with single backdoor
VW T6 (7HC) 07/2015 - 08/2019 with single backdoor*

to replace the 3rd brake light
with guiding lines / adjustable view angle

Note:

acv cameras are suitable for continuous operation

before installation > check the viewing angle and camera alignment at the installation site with a test monitor

camera operating voltage: +12V
camera power supply: +12V

connection:
red: +12V switched load-stable fused
black: car body direct groud/GND

RCA(m) yellow: video

jumper:
green: guiding lines activate/deactivate

*vehicles with other 3rd brake light geometry > tapered bottom corners:
Rear view camera VW (7HC)/T6.1(7HC) with single backdoor > item: 771000-6071

Product characteristic:

Design: plastic
Color: black / red
Extras: guiding lines via jumper / adjustable view angle
Image sensor: 1/3" CMOS
TV system: NTSC
Effective pixels: 976 x 592
Lens: 1,9mm / F 2.0
Resolution: 600 TV lines
Lens angle: diagonal 160° + 5°
View angle: horizontal 115° vertical 75° + 5°
IP Rating: IP68
Terminal: 4 Pin acv-system connector(m) Ø5,2 mm
Operating voltage: +12 DC
Power supply: +12V DC
Operating temperature: -30°C - 75°C
Storage temperature: -40°C - 80°C
Measurements: see 3rd OEM brake light

Pigtail at the camera 1m+/-:
4 Pin acv-system connector(m) Ø5,2mm
1 jumper

Extension cable 6,5m +/-:
4 Pin acv-system connector(f) Ø10mm / 4 Pin acv-system connector(m) Ø5,2mm
power wire red 3m +/- inlay cable: connection to camera / connection reverse light to monitor
ground/GND wire black 3m +/- inlay cable: connectrion car body direct/GND to camera / car body direct/GND to monitor

Connector cable 20cm +/-:
4 Pin acv-system connector(f) Ø10mm
red: power supply
black: GND
RCA(m) yellow: video

Installation accessories:

camera connection to interfaces:
Relay solid state close 2V-12V/1,5A max > item: 40-AD-REMOTE
camera connection to reversing light:
Rear viev camera voltage stabilizer reverse switch signal > item: 771000-6100

Optional accessory:

Camera cable extension for acv camera 5m > item: 771000-6305
Camera cable extension for acv camera 10m > item: 771000-6310
Camera cable extension for acv camera 15m > item: 771000-6315

Technical Data, Signals, Connections and Can-Bus

Product Features

• Construction: Plastic
• Color: black / red
• Extras: Orientation lines / adjustable viewing angle

Sensor Information

• Sensor Type: 1/3" CMOS

Image System

• Image System: NTSC Color
• Effective Pixels: 976 x 592
• Resolution: 600 TV lines

Lens Specifications

• Lens: 1.9mm / F 2.0
• Lens Angle: diagonal 160° + 5°
• Viewing Angle: horizontal 115° vertical 75° + 5°

Protection Class

• Dust and Waterproof: IP68

Electrical Specifications

• Camera Operating Voltage: +12V
• Camera Supply Voltage: +12V
• Operating Voltage: +12V DC
• Supply Voltage: +12V

Temperature Range

• Operating Temperature Range: -30°C - 75°C
• Storage Temperature: -40°C - 80°C

Dimensions

• Dimensions: see OEM brake light

Connections

• Connection: red: +12V switched load-stable fused, black: body ground direct/GND
• Cinch(m) yellow: Video
• Jumper: green: activate/deactivate orientation lines
• Connection: 4 Pin acv system connector(m) Ø5.2mm

Cable Specifications

• Connection cable at the camera 1m+/-: 4 Pin acv system connector(m) Ø5.2mm, 1 Jumper
• Extension 6.5m +/-: 4 Pin acv system connector(f) Ø10mm / 4 Pin acv system connector(m) Ø5.2mm, power line red 3m +/- wired through: connection to camera / connection to reversing light to monitor, ground line/GND black 3m +/- wired through: connection to body ground/GND to camera / connection to body ground/GND direct to monitor
• Connection cable 20cm +/-: 4 Pin acv system connector(f) Ø10mm, red: supply voltage, black: ground/GND, Cinch(m) yellow: Video

Installation Instructions

Before installation: Check viewing angle and camera alignment at the installation site with a test monitor.

Installation Accessories

• Camera connection to interfaces: Electronic relay 2V-12V/1.5A max > Article: 40-AD-REMOTE
• Camera connection to reversing light: Reversing camera voltage stabilizer reversing signal > Article: 771000-6100

Optional Accessories

• Camera cable extension for acv camera 5m > Article: 771000-6305
• Camera cable extension for acv camera 10m > Article: 771000-6310
• Camera cable extension for acv camera 15m > Article: 771000-6315

Important Notes

acv cameras are suitable for continuous operation.

Compatibility Notes

Vehicles with different brake light geometry > tapering lower corners: Reversing camera VW T6(7HC)/T6.1(7HC) with tailgate > Article: 771000-6071