771000-6061, Rear view camera MAN TGE 2017-2025/VW Crafter 03/2017-2025, ACV

Rear view camera MAN / VW

MAN TGE 2027 - 2025

VW Crafter II (SY/SZ) 03/2017 - 08/2023
VW Crafter II (SY/SZ) 08/2023 - 2025
VW e-Crafter II (SYM1E) 09/2018 - 07/2022

for mounting on the 3rd brake light
with guiding lines / nightview
20° adjustable view angle

Note:

all acv cameras are suitable for +12V continuous operation

connection:
red +12V switched load-stable (fused)
black ground car body direct

Product characteristic:

Design: plastic
Color: black / red
Extras: guiding lines via jumper, nightview and 20° adjustable view angle
Image sensor: 1/3" CMOS
TV system: NTSC
Effective pixels: 976 x 592
Lens: 1,9mm / F 2.0
Min.Lux: 0 Lux during night view
Resolution: 600 TV lines
Lens angle diagonal: 160° + 5°
View angle: horizontal 115° vertical 75° + 5°
IP Rating: IP 67
Terminal: 4-pin mini-plug ( male ) 5,2 mm
Power supply: DC 12V + 10%
Current consumption: 150mA during active night vision function
Operating temperature: -30°C - 75°C
Storage temperature: -40°C - 80°C
Measurements: see 3´rd OEM brake light

Pigtail at the camera:

1 Meter cable with 4-Pin mini plug (male) 5,2 mm incl. 1 jumper

Cable kit:

6,5 Meter extension cable incl. 3 meter power wire to connect at the reverse light and inlay cable to connect at the power from the device

4-Pin mini plug (female) 10 mm and plug (male) 5,2 mm

0,2 Meter power wire harness incl. fuse and video connector (RCA)

Installation accessories:

camera connection to interfaces > Relay solid state close 2V-12V/1,5A max: 40-AD-REMOTE
camera connection to reversing light > Rear viev camera voltage stabilizer reverse switch signal: 771000-6100

Optional accessory:

Camera cable extension for acv camera 5m: 771000-6305
Camera cable extension for acv camera 10m: 771000-6310
Camera cable extension for acv camera 15m: 771000-6315

Technical Data, Signals, Connections and Can-Bus

Functions

• With orientation lines / night vision function
• 20° adjustable viewing angle
• Extras: orientation lines and night vision function, viewing angle adjustable by 20°

Connections

• Connection: red +12V switched load-stable (fused), black ground/GND directly to chassis
• Connection: 4 Pin Mini-Plug 5.2 mm

Material and Color

• Construction: Plastic
• Color: black / red

Sensor and Image System

• Sensor Type: 1/3" CMOS
• Image System: NTSC Color
• Effective Pixels: 976 x 592
• Lens: 1.9mm / F 2.0
• Min.Lux: 0 Lux with night vision function
• Resolution: 600 TV lines
• Viewing Angle: 160° + 5°
• Viewing Angle: horizontal 115° vertical 75° + 5°
• Dust and Water Protection: IP67

Power Supply and Current Consumption

• Power Supply: 12Volt + 10 %
• Current Consumption: 150mA with night vision function on

Temperature Range

• Operating Temperature Range: -30°C - 75°C
• Storage Temperature: -40°C - 80°C

Dimensions and Cables

• Dimensions: see OEM brake light
• 1 Meter Cable with 4-Pin Mini-Plug 5.2 mm
• 1 Meter Cable with 4-Pin Mini-Plug incl. 1 Jumper
• 6.5 Meter Extension incl. 3 Meter Power Cable for connection to reversing light and through-wiring to the connection cable at the end device
• 4-Pin Mini-Socket 10 mm and Plug 5.2 mm
• 0.2 Meter Power Connection Cable incl. Fuse and Video Connection Cable (RCA)

Installation Instructions

Mounting Location

For mounting on the 3rd brake light

Installation Accessories

• Camera connection to interfaces > Electronic relay 2V-12V/1.5A max: 40-AD-REMOTE
• Camera connection to reversing light > Reversing camera voltage stabilizer reversing signal: 771000-6100

Optional Accessories

• Camera cable extension for acv camera 5m: 771000-6305
• Camera cable extension for acv camera 10m: 771000-6310
• Camera cable extension for acv camera 15m: 771000-6315

Important Notes

All acv cameras are suitable for connection to +12V continuous operation