771000-6051, Rear view camera Mercedes Sprinter(W906/907/910)/VW Crafter, ACV

Rear view camera Mercedes / VW

Mercedes
Mercedes Sprinter (W906) 04/2006 - 05/2018
Mercedes Sprinter (W907/W910) 06/2018 - 2025

VW
VW Crafter I (2EC/2EK/2F) 03/2006 - 07/2011
VW Crafter I (2EC/2EK/2F) 07/2011 - 11/2016

to replace the 3rd brake light

with guiding lines / night view function / adjustable view angle 20°

Note:

before installation > check the viewing angle and camera alignment at the installation site with a test monitor

camera operating voltage: +12V
camera power supply: +12

connection:
red: +12V switched load-stable fused
black: car body direct ground/GND

RCA(m) yellow: video

cable loop:
green: guiding lines activate/deactivate

Product characteristic camera:

Design: plastic
Color: black / red
Extras: guiding lines via jumper / night view function / adjustable view angle 20°
Image sensor: 1/3" CMOS
TV system: NTSC
Effective pixels: 976 x 592
Lens: 1,9mm / F 2.0
Min.Lux: 0 Lux with activ nightview
Resolution: 600 TV lines
Lens angle: diagonal 160°
View angle: horizontal 115° vertical 75° +5°
IP Rating: IP 68
Terminal: 4 Pin acv-system connector(m)
Operating voltage: +12V DC
Power supply: +12V DC
Current consumption: 200mA with active nightview function
Operating temperature: -30°C - 75°C
Storage temperature: -40°C - 80°C
Measurements: OEM 3rd brake light

Pigtail at the camera 1m +/-:
4 Pin system connector(m)
1 jumper

Voltage converter +3V:
4 Pin system connector(f) / 4 Pin acv-system connector(m) Ø5,2mm

Extension cable 6,5m +/-:
4 Pin acv-system connector(f) Ø10mm / 4 Pin acv-system connector(m) Ø5,2mm
power wire red 3m +/- inlay cable: connection to camera / connection reverse light to monitor
ground/GND wire black 3m +/- inlay cable: connectrion car body direct/GND to camera / car body direct/GND to monitor

Connector cable 20cm +/-:
4 Pin acv-system connector(f) Ø10mm
red: power supply
black: GND
RCA(m) yellow: video

Installation accessories:

Rear view camera plastic wedge 5° for 771000-6000 > item: 771000-6910

camera connection to interfaces:
Relay solid state close 2V-12V/1,5A max > item: 40-AD-REMOTE
camera connection to reversing light:
Rear viev camera voltage stabilizer reverse switch signal > item: 771000-6100

Optional accessory:

Camera cable extension for acv camera 5m > item: 771000-6305
Camera cable extension for acv camera 10m > item: 771000-6310
Camera cable extension for acv camera 15m > item: 771000-6315

Technical Data, Signals, Connections, and Can-Bus

Technical Data

• Camera operating voltage: +12V
• Camera supply voltage: +12V
• Construction: Plastic
• Color: black / red
• Extras: Guide lines via jumper, night vision function, adjustable viewing angle 20°
• Sensor type: 1/3" CMOS
• Image system: NTSC color
• Effective pixels: 976 x 592
• Lens: 1.9mm / F 2.0
• Min. Lux: 0 Lux with night vision function
• Resolution: 600 TV lines
• Lens angle: diagonal 160°
• Viewing angle: horizontal 115°, vertical 75° +5°
• Dust and water protected: IP68
• Operating voltage: +12V DC
• Supply voltage: +12V DC
• Current consumption: 200mA with active night vision function
• Operating temperature range: -30°C - 75°C
• Storage temperature: -40°C - 80°C
• Dimensions: OEM brake light

Connections

• Connection: red: +12V switched load-stable secured, black: chassis ground direct/GND, Cinch(m) yellow: Video
• Cable loop: green: activate/deactivate guide lines

Camera Connections

• Connection: 4 Pin acv system connector(m)
• Connection cable at the camera 1m +/-: 4 Pin system connector(m), 1 jumper

Adapter Connections

• Connection adapter: 4 Pin system connector(f) / 4 Pin acv system connector(m) Ø5.2mm

Extension Connections

• Extension 6.5m +/-: 4 Pin acv system connector(f) Ø10mm / 4 Pin acv system connector(m) Ø5.2mm
• Power line red 3m +/- wired through: Connection to camera / connection to reversing light to monitor
• Ground line/GND black 3m +/- wired through: Connection to chassis ground/GND to camera / connection to chassis ground/GND direct to monitor

Cable Connections

• Connection cable 20cm +/-: 4 Pin acv system connector(f) Ø10mm, red: supply voltage, black: ground/GND, Cinch(m) yellow: Video

Installation Instructions

Before installation: Check viewing angle and camera alignment at the installation site with a test monitor.

Installation Accessories

• Camera connection to interfaces: Normally open relay electronic 2V-12V/1.5A max > Article: 40-AD-REMOTE
• Camera connection to reversing light: Reversing camera voltage stabilizer reversing signal > Article: 771000-6100

Optional Accessories

• Camera cable extension for acv camera 5m > Article: 771000-6305
• Camera cable extension for acv camera 10m > Article: 771000-6310
• Camera cable extension for acv camera 15m > Article: 771000-6315

Important Notes

acv cameras are suitable for continuous operation.