771000-6041, Rear view camera universal license plate holder EU, ACV

Rear view camera universal

Design: License plate holder for EU license plates
Installation: replace OEM license plate holder

with guiding lines / nightview function / adjustable view angle

Note:

acv cameras are suitable for continuous operation

before installation > check the viewing angle and camera alignment at the installation site with a test monitor

camera power supply: +12V

connection:
red: +12V switched load-stable fused
black: car body direct groud/GND

RCA(m) yellow: video

jumper:
green: guiding lines activate/deactivate

patent holder not compatible with Austrian license plates

remove the plastic bars in the upper section to fit the licence plate
push the licence plate upwards from below and snap it into place at the bottom

Product characteristic camera:

Design: plastic
Color: black matt
Extras: license plate holder / guiding lines via jumper / nightview function
Image sensor: 1/3" CMOS
TV system: NTSC color
Effective pixels: 960 x 576
Lens: 1,9mm / F 2.0
Lux: 0 with active nightview function
Resolution: 600 TV lines
Lens angle: diagonal 160°
View angle: horizontal 115° / vertical 85° + 5°
IP Rating: IP68
Terminal: 4 Pin acv-system connector(m) Ø5,2 mm
Operating voltage: +12V DC
Power supply: +12V DC
Current consumption: 200mA with active nightview function
Operating temperature: -30°C - 75°C
Storage temperature: -40°C - 85°C
Measurements: L / W / H - 538mm / 143mm / 28mm

Pigtail at the camera 1m +/-:
4 Pin acv-system connector(m) Ø5,2mm
1 jumper

Extension cable 6,5m +/-:
4 Pin acv-system connector(f) Ø10mm / 4 Pin acv-system connector(m) Ø5,2mm
power wire red 3m +/- inlay cable: connection to camera / connection reverse light to monitor
ground/GND wire black 3m +/- inlay cable: connectrion car body direct/GND to camera / car body direct/GND to monitor

Connector cable 20cm +/-:
4 Pin acv-system connector(f) Ø10mm
red: power supply
black: GND
RCA(m) yellow: video

Installation accessories:

camera connection to interfaces:
Relay solid state close 2V-12V/1,5A max > item: 40-AD-REMOTE
camera connection to reversing light:
Rear viev camera voltage stabilizer reverse switch signal > item: 771000-6100

Optional accessory:

Camera cable extension for acv camera 5m > item: 771000-6305
Camera cable extension for acv camera 10m > item: 771000-6310
Camera cable extension for acv camera 15m > item: 771000-6315

Technical Data, Signals, Connections, and Can-Bus

General Specifications

• Material: Plastic
• Color: Matte black
• Sensor Type: 1/3" CMOS
• Image System: NTSC color
• Effective Pixels: 960 x 576
• Resolution: 600 TV lines
• Lens Specification: 1.9mm / F 2.0
• Lens Angle: Diagonal 160°
• Viewing Angle: Horizontal 115° / Vertical 85° + 5°
• Minimum Illumination: 0 Lux with active night vision function
• Dust and Water Protection: IP68
• Operating Voltage: +12V DC
• Current Consumption: 200mA with active night vision function
• Operating Temperature Range: -30°C - 75°C
• Storage Temperature: -40°C - 85°C
• Dimensions: L / W / H - 538mm / 143mm / 28mm

Functions

• With orientation lines
• Night vision function
• Adjustable viewing angle

Connections

• Connection: Red: +12V switched, load-stable secured, Black: Direct chassis ground/GND, Cinch(m) yellow: Video
• Jumper: Green: Activate/deactivate orientation lines
• Connection: 4 Pin acv system connector(m) Ø5.2mm
• Connection Cable: 20cm +/-: 4 Pin acv system connector(f) Ø10mm, Red: Power supply, Black: Ground/GND, Cinch(m) yellow: Video
• Camera Connection Cable: 1m +/-: 4 Pin acv system connector(m) Ø5.2mm, 1 Jumper
• Extension: 6.5m +/-: 4 Pin acv system connector(f) Ø10mm / 4 Pin acv system connector(m) Ø5.2mm, Power line red 3m +/- wired through: Connection to camera / Connection to reverse light to monitor, Ground line/GND black 3m +/- wired through: Connection to chassis ground/GND to camera / Connection to chassis ground/GND directly to monitor

Optional Accessories

• Camera cable extension for acv camera 5m > Item: 771000-6305
• Camera cable extension for acv camera 10m > Item: 771000-6310
• Camera cable extension for acv camera 15m > Item: 771000-6315

Interface Connection

• Camera connection to interfaces: Electronic relay 2V-12V/1.5A max > Item: 40-AD-REMOTE
• Camera connection to reverse light: Rearview camera voltage stabilizer reverse signal > Item: 771000-6100

Installation Instructions

• Mounting Type: Replacement of OEM license plate holder
• Before installation: Check viewing angle and camera alignment at the installation site with a test monitor
• For license plate mounting: Remove transport security plastic bars in the upper area, insert the license plate from bottom to top and snap it in at the bottom

Important Notes

• acv cameras are suitable for continuous operation
• Patent holder not suitable for Austrian license plates