771000-6000, Rear view camera sub-construction foursquared, ACV

Rear view camera universal

Design: foursquared
Installation: sub-construction

with guiding lines / mirror function

Note:

acv cameras are suitable for continuous operation

before installation > check the viewing angle and camera alignment at the installation site with a test monitor

camera operating voltage: +3V
camera power supply: +12V / +24V

connection without voltage converter +3V in scope of delivery damages the camera

connection:
red: +12V / +24V switched load-stable fused
black: car body direct groud/GND

RCA(m) yellow: videosystem connector(f)

jumper:
green: guiding lines activate/deactivate
white: mirror function activate/deactivate

Product characteristic camera:

Design: plastic with 8mm screwed tube cable guiding
Color: black
Extras: guiding lines via jumper / mirror function via jumper
Image sensor: 1/3" CMOS
TV system: NTSC
Effective pixels: 728 x 488
Lens: 1,9mm / F 2.0
Lux: 0,3
Resolution: 600 TV lines
Lens angle: diagonal 170°
View angle: horizontal 103° vertical 75° +5°
IP Rating: IP68
Terminal: 4 Pin acv-system connector(m) Ø5,2 mm
Operating voltage: +3V DC
Power supply: +12V / +24V DC > with voltage converter
Current consumption: 200mA
Operating temperature: -30°C - 75°C
Storage temperature: -40°C - 85°C
Measurements: L / W / H - 34,5mm / 33mm / 27,57mm

Pigtail at the camera 1m +/-:
4 Pin acv-system connector(m) Ø5,2mm
2 jumper

Voltage converter +3V:
4 Pin acv-system connector(f) Ø10mm / 4 Pin acv-system connector(m) Ø5,2mm

Extension cable 6,5m +/-:
4 Pin acv-system connector(f) Ø10mm / 4 Pin acv-system connector(m) Ø5,2mm
power wire red 3m +/- inlay cable: connection to camera / connection reverse light to monitor
ground/GND wire black 3m +/- inlay cable: connectrion car body direct/GND to camera / car body direct/GND to monitor

Connector cable 20cm +/-:
4 Pin acv-system connector(f) Ø10mm
red: power supply
black: GND
RCA(m) yellow: video

Installation accessories:

Rear view camera plastic wedge 5° for 771000-6000 > item: 771000-6910

camera connection to interfaces:
Relay solid state close 2V-12V/1,5A max > item: 40-AD-REMOTE
camera connection to reversing light:
Rear viev camera voltage stabilizer reverse switch signal > item: 771000-6100

Optional accessory:

Camera cable extension for acv camera 5m > item: 771000-6305
Camera cable extension for acv camera 10m > item: 771000-6310
Camera cable extension for acv camera 15m > item: 771000-6315

Technical Data, Signals, Connections, and Can-Bus

General Specifications

• Sensor Type: 1/3" CMOS
• Image System: NTSC Color
• Effective Pixels: 728 x 488
• Resolution: 600 TV lines
• Lens: 1.9mm / F 2.0
• Light Sensitivity: 0.3 Lux
• Lens Angle: diagonal 170°
• Viewing Angle: horizontal 103° vertical 78° +5°
• Dust and Water Protection: IP68
• Color: Black
• Construction: Plastic with 8mm threaded tube cable guide
• Dimensions: L / W / H - 34.5mm / 33mm / 27.57mm

Electrical Specifications

• Operating Voltage: +3V DC
• Supply Voltage: +12V / +24V DC > with voltage converter
• Current Consumption: 200mA
• Operating Temperature Range: -30°C - 75°C
• Storage Temperature: -40°C - 85°C

Connections and Cables

• Connection: 4 Pin acv-System Connector(m) Ø5.2mm
• Camera Connection Cable: 1m +/-: 4 Pin acv-System Connector(m) Ø5.2mm, 2 Jumpers
• Voltage Converter +3V: 4 Pin acv-System Connector(f) Ø10mm / 4 Pin acv-System Connector(m) Ø5.2mm
• Extension 6.5m +/-: 4 Pin acv-System Connector(f) Ø10mm / 4 Pin acv-System Connector(m) Ø5.2mm, Red power line 3m +/- wired through: Connection to camera / Connection to reverse light to monitor, Black ground line/GND 3m +/- wired through: Connection to chassis ground/GND to camera / Connection to chassis ground/GND directly to monitor
• Connection Cable 20cm +/-: 4 Pin acv-System Connector(f) Ø10mm, Red: Power supply, Black: Ground/GND, Cinch(m) Yellow: Video
• Jumpers: Green: Activate/deactivate orientation lines, White: Activate/deactivate mirroring function
• Extras: Orientation lines via jumper / Mirroring function via jumper

Installation Instructions

Before installation > Check viewing angle and camera alignment at the installation site with a test monitor.

Installation Accessories

• Rearview Camera Plastic Wedge 5° Angle for 771000-6000 > Item: 771000-6910

Camera Connection

• Camera connection to interfaces: Electronic relay 2V-12V/1.5A max > Item: 40-AD-REMOTE
• Camera connection to reverse light: Rearview camera voltage stabilizer reverse signal > Item: 771000-6100

Optional Accessories

• Camera cable extension for acv camera 5m > Item: 771000-6305
• Camera cable extension for acv camera 10m > Item: 771000-6310
• Camera cable extension for acv camera 15m > Item: 771000-6315

Important Notes

• acv cameras are suitable for continuous operation.
• Connecting without the +3V voltage converter included will damage the camera.