381320-40-2, 10" facia plate Skoda Octavia Kit 9"/7" HU LHD, ACV

Facia plate 10" / 9" / 7" Kit Skoda

Many car manufacturers install HU and Sat Nav systems that are adapted to the vehicle interior and functionally adapted to the vehicle.

To replace the OEM HU, corresponding facia plates are required to match the appearance and adapt the installation cut-out to the dimensions of the retrofit HU.

Depending on the vehicle and equipment, additional adapters or interfaces such as radio connection cables, antenna adapters, steering wheel remote control interfaces, camera adapters or amlified system adapters are often required for installation.

Note:

vehicles left-hand drive

vehicle settings only possible with additional interface

10" short body HU with trapezoidal monitor
10" modular HU with trapezoidal monitor and silver box

10" HU with L-body at the bottom check the specific installation situation

9" short body HU with trapezoidal monitor
9" modular HU with trapezoidal monitor and silver box

9" HU with L-body at the bottom check the specific installation situation

7" modular HU with display and silverbox
7" HU with short body

7" HU with L-body at the bottom check the specific installation situation
7" HU assembly without sheet metal basket without HU trim frame

HU assembly with customised accessories
Display assembly with customised accessories

secure the radio panel in the radio housing using suitable fasteners
adjustments to the fit using workshop tools if necessary

Vehicle application:

Skoda Octavia III (5E) 02/2013 - 12/2016
Skoda Octavia III (5E) 01/2017 - 01/2020

Colour: piano black

Mounting cutout 10" HU display: 250mm/241mm x 146mm
Mounting cutout 9" HU display: 230mm/220mm x 130mm
Mounting cutout HU display 7": 178mm/173mm x 102mm/98mm

Scope of delivery:

10" facia plate Skoda Octavia 2013-2020 piano black > item: 381320-140-1
10"facia plate accessory 10">9" display reduction > item: 271000-40
10"facia plate accessory 10">7" display reduction > item: 271000-41

Technical data, signals, connections and CAN bus

General

• Colour: piano black

Radio display installation cut-out

• 10" radio display cut-out: 250 mm/241 mm x 146 mm
• 9" radio display cut-out: 230 mm/220 mm x 130 mm
• 7" radio display cut-out: 178 mm/173 mm x 102 mm/98 mm

Installation notes

Additional adapters or interfaces (depending on vehicle and equipment)

In addition, depending on the vehicle and equipment, additional adapters or interfaces are often required for installation, such as radio connection cables, antenna adapters, steering wheel remote control adapters, camera adapters or active system adapters.

Unit installation and display installation

• 7" units: installation without metal mounting sleeve, without trim frame.
• Unit installation with individual accessories.
• Display installation with individual accessories.

Securing and fit

• Secure the fascia additionally in the radio slot using suitable means.
• Rework the fit with workshop tools if necessary.

Important notes

Notes

• Note: vehicles with left-hand drive.
• Vehicle settings are only possible with an additional interface.

10" units

• 10" tablet units with a trapezoidal monitor.
• 10" modular units with a trapezoidal monitor and Silverbox.
• 10" units with L-Body at the bottom: check the individual installation situation.

9" units

• 9" tablet units with a trapezoidal monitor.
• 9" modular units with a trapezoidal monitor and Silverbox.
• 9" units with L-Body at the bottom: check the individual installation situation.

7" units

• 7" modular units with display and Silverbox.
• 7" Short Body units.
• 7" units with L-Body at the bottom: check the individual installation situation.