381250-192-1, 10" facia plate Nissan Primastar/Opel Vivaro/Renault Trafic, ACV

Facia plate 10" Nissan / Opel / Renault

Many car manufacturers install HU and Sat Nav systems that are adapted to the vehicle interior and functionally adapted to the vehicle.

To replace the OEM HU, corresponding facia plates are required to match the appearance and adapt the installation cut-out to the dimensions of the retrofit HU.

Depending on the vehicle and equipment, additional adapters or interfaces such as radio connection cables, antenna adapters, steering wheel remote control interfaces, camera adapters or amlified system adapters are often required for installation.

Note:

OEM display is not included due to installation

OEM display must remain connected for the SWC interface to function

vehicles with trapezoid OEM HU without centre kink

10" short body HU with trapezoidal monitor
10" modular HU with trapezoidal monitor and silver box
10" L-Body HU with body on the bottom the specific installation situation

HU assembly with customised accessories
Display assembly with customised accessories

secure the radio panel in the radio housing using suitable fasteners
adjustments to the fit using workshop tools if necessary

Vehicle application:

Nissan
Nissan Primastar (4/F4/J4) 07/2011 - 07/2015

Opel
Opel Vivaro A (X83) 09/2011 - 07/2014

Renault
Renault Trafic II (L/jL) 01/2011 - 08/2014

Colour: black

Mounting cutout HU display: 250mm/241mm x 146mm

Optional:

10"facia plate accessory 10">9" display reduction > item: 271000-40
10"facia plate accessory 10">7" display reduction > item: 271000-41

Technical data, signals, connections and CAN bus

General

• Color: black

Compatible devices

• 10" tablet devices with a trapezoidal monitor
• 10" modular devices with a trapezoidal monitor and Silverbox
• 10" L-body devices with the body at the bottom: check the individual installation situation

Dimensions

• Radio display cut-out: 250 mm/241 mm x 146 mm

Optional

• Optional: 10" radio fascia accessory 10">9" display reduction > Article: 271000-40
• Optional: 10" radio fascia accessory 10">7" display reduction > Article: 271000-41

Installation notes

Additional adapters or interfaces (vehicle- and equipment-dependent)

For installation, additional adapters or interfaces are often required, such as:

• radio wiring harness
• antenna adapter
• steering wheel remote control adapter
• camera adapter
• active system adapter

Note on steering wheel controls

The OEM display must remain connected for the steering wheel control interface to function.

Note on device types

• 10" L-body devices with the body at the bottom: check the individual installation situation

Mounting

• Device mounting with individual accessories
• Display mounting with individual accessories

Fixing and fit

• Additionally secure the radio fascia in the radio slot using suitable means
• If necessary, rework the fit using workshop tools

Important notes

• Note: The OEM display is omitted due to installation.
• The OEM display must remain connected for the steering wheel control interface to function.

Vehicle note

* Vehicles without a vertically mounted OEM unit