12-1328-45-15, CAN-Bus Kit VAG 52Pin Quadlock>ISO/antenna Fakra>ISO, ACV

CAN-Bus Kit AUDI / MAN /SEAT / SKODA / VW

52 Pin Quadlock > ISO power/speaker
antenna > ISO

When exchanging the OEM head unit in a CAN Bus equipped vehicle, a specific CAN Bus Interface is required.

Vehicle pecific and universal CAN Bus Interfaces convert relevant digital data of the respective vehicle specific CAN Bus into analog signals.

Various signals or comfort functions like ignition, illumination, reverse gear and vehicle speed signals are sorted and made available for aftermarket solutions depending on the interface used.

Please compare the pictured harness connectors with the connectors in your car and make sure that they fit optically and technically.

Check if one of the listed OEM head units were installed originally.

Also check vehicle functionality and vehicle settings functionality before final assembly.


Note:

CAN Bus

connector: 52 Pin Quadlock VAG
connector: OEM antenna Fakra(m) +12V phantom power > ISO(m)

vehicles Seat / Skoda / VW with MIB PQ system
vehicles with +12V antenna system

check supply voltage OEM antenna before installation with OEM HU:

OEM antenna 8,5V optional:
Antenna adapter Fakra(m)(double)>DIN(m) 8.5V > item: 1524-29

vehicle settings not supported
E-Call not supported

vehicles MAN / Seat / Skoda / VW with E-Call:
E-Call function retention MAN/Seat/Skoda/VW 52 Pin Quadlock > item: 1424-02

vehicles MAN / Seat / Skoda / VW with rear view camera:
Rear view camera adapter OEM VW different vehicles MIB-PQ > item: 771324-1037

Vehicle application:

Audi
Audi A1 (8X) 07/2010 - 11/2014*
Audi A1 (8X) 11/2014 - 04/2018*
Audi A3 (8V) 02/2013 - 05/2016
Audi A3 (8V) 07/2016 - 03/2020
Audi Q3 (8U) 10/2011 - 11/2014*
Audi Q3 (8U) 02/2015 - 08/2018*

MAN
MAN TGE 04/2017 - 2023

Seat
Seat Alhambra (7N) 06/2015 - 01/2022
Seat Arona (KJ) 11/2017 - 06/2021
Seat Ateca (5FP) 08/2016 - 08/2020
Seat Ateca (5FP) 08/2020 - 2023
Seat Ibiza (6P) 07/2015 - 04/2017
Seat Ibiza (KJ) 07/2017 - 03/2021
Seat Mii (AA) 05/2015 - 04/2018
Seat Mii (AA) 01/2020 - 02/2021
Seat Leon (5F) 11/2012 - 12/2016
Seat Leon (5F) 11/2016 - 01/2020
Seat Toledo (NH) 03/2013 - 08/2018

Skoda
Skoda Citigo (AA) 05/2017 - 06/2019
Skoda Fabia III (5J) 11/2014 - 08/2018
Skoda Fabia III (5J) 08/2018 -05/2021
Skoda Karoq (NU) 11/2017 - 11/2021
Skoda Kodiaq (NS) 03/2017 - 06/2021
Skoda Octavia III (5E) 02/2013 - 12/2016
Skoda Octavia III (5E) 01/2017 - 01/2020
Skoda Rapid (NH) 04/2015 - 05/2017
Skoda Rapid (NH) 05/2017 - 02/2019
Skoda Superb (3V) 06/2015 - 06/2019
Skoda Yeti (5L) 10/2013 - 07/2017

VW
VW Amarok (2H) 09/2016 - 07/2020
VW Arteon (3H) 11/2017 - 06/2020
VW Beetle (16) 06/2016 - 03/2018
VW Caddy IV (DU) 06/2015 - 09/2020
VW Crafter II (SY/SZ) 03/2017 - 2023**
VW Golf VII (AU) 11/2012 - 12/2016
VW Golf VII (AU) 03/2017 - 05/2020
VW Grand California (SY/SZ) 03/2019 - 2023
VW Passat B8 10/2014 - 05/2019
VW Polo V (6R) 04/2014 - 07/2017
VW Polo VI (AW) 11/2017 - 05/2021
VW Scirocco (13) 08/2014 - 10/2017
VW Sharan II (7N) 07/2015 - 10/2021
VW T6 (7HC) 07/2015 - 08/2019
VW T6.1 (7HC) 11/2019 - 2023
VW T-Roc (A1) 11/2017 - 10/2021
VW Taigo (CS) 10/2021 - 2023
VW Tiguan II (5N) 05/2016 - 05/2021
VW Touran (5T) 09/2015 - 2023
VW UP! (AA) 07/2016 - 12/2022
VW e-UP! (AA) 08/2016 - 08-2023

The following signals are provided:

Reimported vehicles or vehicles with different software may be incompatible in functions.

pink: +12V ignition clamp 15 1,5A max.
orange: +12V illumination clamp 58 0,1A max.
white: +12V reverse gear signal 1,5A max.
yellow/green yellow/red: speed pulse signal

*vehicles with Concert OEM HU with dash mount colour monitor
*vehicles with Chorus OEM HU with monochrome display > item 12-1324-45-15
**reveres gear signal only by running engine

General installation instructions:

Connections, connection changes, alternative connections, connections of loose cables or connection extensions of loose cables specified in the information text or the manual are for orientation purposes only and for the information of trained specialist instaler.

Connections, changes to the cable configuration of the wiring harness or use of alternative connections or connection extensions:
1: Connections and changes are to be carried out exclusively by trained specialist installer.
2: Connections and modifications must be checked before connection for any manufacturer approvals or manufacturer warranty conditions that may be affected by the modifications.
3: Connections and modifications must be checked for function and correctness by measuring and comparing them with the vehicle's cable assignment diagram before connection.
4: Connections and modifications are made on the user's own responsibility without guarantee of function.
5: Connections and modifications are made on the user's own responsibility without any guarantee of damage to the vehicle, the retrofit device or the interface.
6: Modifications to the pre-assembled wiring harness may invalidate the product's warranty.