12-1196-45-15, CAN-Bus Kit Mercedes/VW Quadlock>ISO/antenna Fakra>ISO, ACV

CAN-Bus Kit Mercedes / Smart / VW

power/speaker > ISO
antenna > ISO

When exchanging the OEM head unit in a CAN Bus equipped vehicle, a specific CAN Bus Interface is required.

Specific and universal CAN Bus Interfaces convert relevant digital data of the respective vehicle specific CAN Bus into analog signals.

Various signals or comfort functions like ignition, illumination, reverse gear and vehicle speed signals are sorted and made available for aftermarket solutions depending on the interface used.

Please compare the pictured harness connectors with the connectors in your car and make sure that they fit optically and technically.

Check if one of the listed OEM head units were installed originally.

Also check vehicle functionality and vehicle settings functionality before final assembly.


Note:

CAN Bus

connector: 40Pin Quadlock
connector: OEM antenna Fakra(m) > ISO(m)

vehicles Mercedes with Audio 20 2-DIN OEM HU
vehicles Mercedes with Audio 50 APS Comand NTG2.5 OEM Sat Nav***
vehicles Mercedes Sprinter (W907/W910) with Browse 1-DIN OEM HU
vehicles Mercedes Sprinter (W907/W910) with open dash
vehicles Mercedes Citan 420 (W420) with Browse 1-DIN OEM HU

vehicles Smart For Four with Comand OEM Sat Nav 40 Pin Quadlock

vehicles VW Crafter with 2-DIN OEM HU
vehicles VW Crafter with 2-DIN OEM SatNav

vehicles without open dash
vehicles 1-DIN OEM HU

vehicles Mercedes Sprinter/V-Class with E-Call:
E-Call function retention Mercedes Sprinter/V-class bulk > item: 1424-27-0

vehicles Mercedes with Harman Kardon OEM amplified system:
Active system adapter Mercedes/Porsche MOST>RCA ISO > item: 13-1190-52-1
Aktivsystemadapter Mercedes diverse Fahrzeuge MOST>Cinch > item: 13-1190-53-1

vehicles with OEM rear view camera:
Rear view camera adapter Fakra(m)>RCA(m) OEM camera > item: 771000-2011

reimported vehicles or vehicles with different software may be incompatible in functions.

Vehicle application:

Mercedes
Mercedes A-class (C169/W169) 10/2004 - 04/2008
Mercedes A-class (C169/W169) 06/2008 - 06/2012
Mercedes B-class (T245) 07/2005 - 04/2008
Mercedes B-class (T245) 04/2008 - 09/2011
Mercedes C-class (CL203/S203/W203) 02/2004 - 09/2007
Mercedes C-class (C204/S204/W204) 08/2007 - 01/2011**
Mercedes C-class (C204/S204/W204) 03/2011 - 10/2015**
Mercedes Citan 420 (W420) 10/2021 - 2023
Mercedes CLC-class (CL203) 06/2008 - 02/2011
Mercedes CLK-class (W209) 04/2005 - 01/2010
Mercedes CLS-class (C219) 04/2008 - 09//2010
Mercedes E-class (S211/W211) 03/2008 - 01/2009
Mercedes E-class (A212/C212/S212/W204) 02/2009 - 03/2013**
Mercedes G-class (W463) 04/2007 - 06/2008
Mercedes G-class (W164) 09/2008 - 06/2012
Mercedes GL-class (X164) 09/2006 - 05/2009
Mercedes GL-class (X164) 05/2009 - 07/2012
Mercedes M-class (W164) 07/2005 - 04/2008
Mercedes M-class (W164) 10/2008 - 07/2011
Mercedes ML (W164) 07/2005 - 04/2008
Mercedes ML (W164) 10/2008 - 07/2011
Mercedes R-class (W251) 09/2005 - 05/2007
Mercedes R-class (W251) 05/2007 - 05/2010
Mercedes SLK-class (R171) 04/2008 -03/2011
Mercedes Sprinter (W906) 04/2006 - 08/2013
Mercedes Sprinter (W906) 08/2013 - 05/2018
Mercedes Sprinter (W907/W910) 06/2018 - 12/2020*/**
Mercedes Sprinter (W907/W910) 11/2019 - 2023*/**
Mercedes Vito/Viano (W639) 07/2003 - 08/2010
Mercedes Vito/Viano (W639) 09/2010 - 03/2014
Mercedes Vito (V447) 10/2014 - 02/2019*/**
Mercedes Vito (V447) 05/2019 - 2023*/**

Smart
Smart For Four (W454) 01/2004 - 04/2007***

VW
VW Crafter I (2EC/2EK/2F) 03/2006 - 07/2011
VW Crafter I (2EC/2EK/2F) 07/2011 - 11/2016

Following signals are provided:

pink: +12V ignition clamp 15 1,5A max.
orange: +12V illumination clamp 58 0,1A max.
white: +12V reverse signal 1,5A max.
yellow/green yellow/red: speed pulse signal

*vehicles with E-call > item: 1424-27-0
**vehicles with +12V power down funktion > +12V continuous current clamp 30 batterie fused
***clock adjustment not supported > vehicles encode to Audio 20 OEM HU

General installation instructions:

Connections, connection changes, alternative connections, connections of loose cables or connection extensions of loose cables specified in the information text or the manual are for orientation purposes only and for the information of trained specialist instaler.

Connections, changes to the cable configuration of the wiring harness or use of alternative connections or connection extensions:
1: Connections and changes are to be carried out exclusively by trained specialist installer.
2: Connections and modifications must be checked before connection for any manufacturer approvals or manufacturer warranty conditions that may be affected by the modifications.
3: Connections and modifications must be checked for function and correctness by measuring and comparing them with the vehicle's cable assignment diagram before connection.
4: Connections and modifications are made on the user's own responsibility without guarantee of function.
5: Connections and modifications are made on the user's own responsibility without any guarantee of damage to the vehicle, the retrofit device or the interface.
6: Modifications to the pre-assembled wiring harness may invalidate the product's warranty.