12-1190-46-15, CAN-Bus Kit Mercedes/VW ISO>ISO/antenna>DIN, ACV

CAN-Bus Kit Mercedes / VW

ISO / 10 pin ISO / Mini-ISO > ISO
Antenna > DIN

When exchanging the OEM head unit in a CAN Bus equipped vehicle, a specific CAN Bus Interface is required.

Vehicle pecific and universal CAN Bus Interfaces convert relevant digital data of the respective vehicle specific CAN Bus into analog signals.

Various signals or comfort functions like ignition, illumination, reverse gear and vehicle speed signals are sorted and made available for aftermarket solutions depending on the interface used.

Please compare the pictured harness connectors with the connectors in your car and make sure that they fit optically and technically.

Check if one of the listed OEM head units were installed originally.

Also check vehicle functionality and vehicle settings functionality before final assembly.


Note:

CAN-Bus

connector: ISO / 10 pin ISO / Mini ISO
connector OEM Antenna ISO(m) > DIN(M)

vehicles Mercedes with Audio 5 / Audio 10 1-DIN OEM HU
vehicles Mercedes with Audio 30 APS 1-DIN OEM Sat Nav

vehicles VW Crafter with RCD 2001 1-DIN OEM HU

vehicles Mercedes / VW with open dash > check connection and assignment before installation with OEM HU:

brown-red twisted: CAN high
brown twisted: CAN low

CAN Bus in CAN Bus distributor under sill cover
CAN Bus at climatronic
CAN Bus in Mini ISO connector: Pin 1 Can low / Pin 2 Can high
CAN Bus in 8 Pin power connector: Pin 7 CAN High / Pin 6 CAN low
CAN Bus in 18 Pin AMP connector: Pin 8 CAN low / Pin 9 CAN high / not Robert Bosch CAN

OEM HU with ISO block connector:
ISO extension harness speaker 10cm> iitem: 1322-02

vehicles with 10 Pin ISO / ISO speaker connector OEM amplified system without B2B optical system OEM amplified system:
Active system adapter different vehicles ISO>ISO > item: 13-1190-50

Vehicle application:

Mercedes A-class (W169) 10/2004 - 04/2012
Mercedes A-class (C169) 11/2004 - 07/2011
Mercedes B-class (T245) 06/2005 - 06/2011
Mercedes C-class (W203) 03/2000 - 01/2005
Mercedes CLK-class (C208) 07/1999 - 03/2003
Mercedes CLK-class (C209) 03/2002 - 05/2005
Mercedes E-class (W210) 06/1999 - 12/2002
Mercedes SL-class (R230) 08/2001 - 02/2006
Mercedes SLR (C199) 13/2003 - 12/2009
Mercedes Sprinter (W906) 04/2006 - 08/2013
Mercedes Sprinter (W906) 08/2013 - 05/2018
Mercedes Vito/Viano (W639) 07/2003 - 08/2010
Mercedes Vito/Viano (W639) 09/2010 - 03/2014

VW
VW Crafter I (2EC/2EK/2F) 03/2006 - 07/2011
VW Crafter I (2EC/2EK/2F) 07/2011 - 11/2016

The following signals are provided:

Reimported vehicles or vehicles with different software may be incompatible in functions.

pink: +12V ignition clamp 15 1,5A max.
orange: +12V illumination clamp 58 0,1A max.
white: +12V reverse gear signal 1,5A max.
yellow/green yellow/red: speed pulse signal

General installation instructions:

Connections, connection changes, alternative connections, connections of loose cables or connection extensions of loose cables specified in the information text or the manual are for orientation purposes only and for the information of trained specialist instaler.

Connections, changes to the cable configuration of the wiring harness or use of alternative connections or connection extensions:
1: Connections and changes are to be carried out exclusively by trained specialist installer.
2: Connections and modifications must be checked before connection for any manufacturer approvals or manufacturer warranty conditions that may be affected by the modifications.
3: Connections and modifications must be checked for function and correctness by measuring and comparing them with the vehicle's cable assignment diagram before connection.
4: Connections and modifications are made on the user's own responsibility without guarantee of function.
5: Connections and modifications are made on the user's own responsibility without any guarantee of damage to the vehicle, the retrofit device or the interface.
6: Modifications to the pre-assembled wiring harness may invalidate the product's warranty.