771000-6064, Rear view camera Citroen Jumpy/Peugeot Expert/Toyota Proace, ACV

Rear view camera

Citroen Dispatch 03/2016 - 2024
Citroen Jumpy (V) 03/2016 - 01/2024

Opel Vivaro (VIVARO C)) 09/2019 - 01/2021

Peugeot Expert (V) 03/2016 - 04/2024

Toyota ProAce (V) 03/2016 - 04/2024

to replace the OEM 3rd brake light
with guiding lines and adjustable view angle

Note:

all acv cameras are suitable for +12V continuous operation

connection:
red +12V switched load-stable (fused)
black ground car body direct

Product characteristic:

Design: plastic
Color: black / red
Extras: guiding lines via jumper and adjustable view angle
Image sensor: 1/3" CMOS
TV system: NTSC
Effective pixels: 976 x 572
Lens: 1,9mm / F 2.0
Resolution: 600 TV lines
Lens angle: 160° + 5°
Lux: 0,3
View angle: horizontal 115° vertical 75° + 5°
IP Rating: IP68
Terminal: 4-pin mini-plug ( male ) 5,2 mm
Power supply: DC 12V + 10%
Operating temperature: -30°C - 75°C
Storage temperature: -40°C - 80°C
Measurements: looks as OEM 3rd brakelight

Pigtail at the camera:

1 Meter cable with 4-pin mini plug (male) 5,2 mm incl. 1 jumper

6,5 Meter extension cable incl. 3 meter power wire to connect at the reverse light
and inlay cable to connect at the power from the device
4-pin mini plug (female) 10 mm and plug (male) 5,2 mm

0,2 Meter power wire harness incl. fuse and video connector (RCA)

Installation accessories:

camera connection to interfaces Relay solid state close 2V-12V/1,5A max: 40-AD-REMOTE
camera connection to reversing light Rear viev camera voltage stabilizer reverse switch signal: 771000-6100

Optional accessory:

771000-6305 Extension cable 5 Meter
771000-6310 Extension cable 10 Meter
771000-6315 Extension cable 15 Meter

Technical Data, Signals, Connections and Can-Bus

Camera Features

• Construction: Plastic
• Color: black / red
• Sensor Type: 1/3" CMOS
• Image System: NTSC Color
• Effective Pixels: 976 x 592
• Lens: 1.9mm / F 2.0
• Lux: 0.3
• Resolution: 600 TV lines
• Viewing Angle: 160° + 5°
• Viewing Angle: horizontal 115° vertical 75° + 5°
• Dust and Water Protection: IP68
• Supply Voltage: 12Volt + 10 %
• Operating Temperature Range: -30°C - 75°C
• Storage Temperature: -40°C - 80°C
• Dimensions: see OEM brake light

Connections

• Connection: red +12V switched load stable (fused), black ground/GND directly to chassis
• Connection: 4 Pin Mini-Plug 5.2 mm

Cable Set

• 1 Meter Cable with 4-Pin Mini-Plug 5.2 mm
• 1 Meter Cable with 4-pin Mini-Plug incl. 1 Jumper
• 6.5 Meter Extension incl. 3 Meter Power Cable for connection to reversing light and through-wiring to the connection cable at the end device
• 4-Pin Mini-Socket 10 mm and Plug 5.2 mm
• 0.2 Meter Power Connection Cable incl. Fuse and Video Connection Cable (RCA)

Installation Instructions

Installation Accessories

• Camera connection to interfaces closing relay electronic 2V-12V/1.5A max: 40-AD-REMOTE
• Camera connection to reversing light reversing camera voltage stabilizer reversing signal: 771000-6100

Optional Accessories

• 771000-6305 Extension 5 Meters
• 771000-6310 Extension 10 Meters
• 771000-6315 Extension 15 Meters

Important Notes

All acv cameras are suitable for connection to +12V continuous operation.