ACV 1238-02
Your shopping cart is empty!
Buick
| Model | Years |
|---|---|
| Century | 1996–1998 |
| Electra | 1990–1998 |
| Le Sabre | 1994–1998 |
| Park Avenue | 1994–1998 |
| Regal | 1988–1994 |
| Riviera | 1986–1995 |
| Roadmaster | 1991–1994 |
| Skyhawk | 1988–1995 |
| Skylark | 1987–1995 |
Cadillac
| Model | Years |
|---|---|
| Coupe DeVille | 1988–1993 |
| Coupe DeVille | 1990–1991 |
| Deville | 1988–1995 |
| Eldorado | 1991–1998 |
| Escalade | 2000–2002 |
| Fleetwood | 1996–1998 |
| Seville | 1995–1998 |
Chevrolet
| Model | Years |
|---|---|
| Astro | 1991–2005 |
| Avalanche | 2002 |
| Beretta | 1991–1996 |
| Blazer | 1992–1994 |
| Camaro | 1990–2001 |
| Caprice | 1991–1996 |
| Cavalier | 1991–1999 |
| Corsica | 1991–1996 |
| Express | 1996–2000 |
| Impala | 1994–1996 |
| Lumina | 1990–2001 |
| Malibu | 1997–2000 |
| Monte Carlo | 1995–1999 |
| Pickup | 1995–2000 |
| S10 Blazer | 1998–2001 |
| S10 Pickup | 1995–2002 |
| Silverado | 1999–2002 |
| Suburban | 1995–2002 |
| Tahoe | 1995–2002 |
| Van | 1988–1995 |
GMC
| Model | Years |
|---|---|
| Envoy | 1999–2001 |
| Jimmy | 1989–1991 |
| Jimmy | 1995–1997 |
| Safari | 1985–2005 |
| Savana | 1996–2000 |
| Sierra | 1995–2002 |
| Sonoma | 1995–2002 |
| Suburban | 1995–1999 |
| Van | 1988–1995 |
| Yukon | 1995–2002 |
| Yukon | 2001–2002 |
Oldsmobile
| Model | Years |
|---|---|
| Achieva | 1992–1995 |
| Bravada | 1991–1994 |
| Cutlass Calais | 1990–1996 |
| Cutlass Supreme | 1992–1994 |
| Eighty-Eight | 1989–1993 |
| Ninety-Eight | 1989–1993 |
| Silhouette | 1990–1999 |
Pontiac
| Model | Years |
|---|---|
| 6000 | 1990–1991 |
| Bonneville | 1992–1999 |
| Firebird | 1990–2002 |
| Grand Am | 1990–2000 |
| Grand Prix | 1990–2003 |
| Montana | 1999 |
| Sunbird | 1990–1999 |
| Sunfire | 1995–1999 |
| Trans Am | 1990–2002 |
| Trans Sport | 1990–1999 |
Saturn
| Model | Years |
|---|---|
| Ion | 1995–1999 |
| S-Series | 1991–1999 |
Product Description
1238-02, ISO Harness Adapter different vehicles GM 16Pin USA1, ACV
ISO Harness Adapter GM USA1
ISO adapter cables are used for the passive connection of retrofit devices to the factory plugs present in the radio installation slot.
Depending on the vehicle and equipment, the following signals are provided:
+12V continuous current clamp 30
+12V ignition clamp 15
+12V Light clamp 58
+12V Antenna remote
GND clamp 31
Speaker connection for front and rear speakers
For vehicles with different equipment, signals that are not available may have to be connected to suitable tapping points in the vehicle or additional adaptations/interfaces may have to be used:
CAN bus interfaces
LFB interfaces
Amplified system adapter
Camera adapter
The signals must be checked before connection.
Note:
connector: 16 Pin GM USA1
Use case:
HU connector power / speaker
