ACV 12-1041-46-15
Your shopping cart is empty!
Citroen
| Model | Years |
|---|---|
| Berlingo | 2008–2012 |
| Berlingo | 2012–2015 |
| Berlingo | 2015–2018 |
| C1 | 2012–2014 |
| C2 | 2003–2008 |
| C2 | 2008–2009 |
| C3 | 2005–2010 |
| C3 | 2010–2013 |
| C3 | 2013–2017 |
| C4 | 2004–2010 |
| C5 | 2004–2008 |
| C8 | 2008–2012 |
| C8 | 2012–2014 |
| DS3 | 2010–2014 |
| DS4 | 2011–2015 |
| Jumpy | 2007–2012 |
| Jumpy | 2012–2016 |
Fiat
| Model | Years |
|---|---|
| Scudo | 2007–2016 |
Peugeot
| Model | Years |
|---|---|
| 207 | 2006–2009 |
| 207 | 2009–2015 |
| 208 | 2012–2015 |
| 307 | 2005–2009 |
| 308 | 2007–2011 |
| 308 | 2011–2015 |
| 407 | 2004–2008 |
| 407 | 2006–2012 |
| 807 | 2002–2008 |
| 807 | 2008–2014 |
| Expert | 2007–2012 |
| Expert | 2012–2016 |
| Partner | 2012 |
| RCZ | 2010–2015 |
Toyota
| Model | Years |
|---|---|
| Proace | 2013–2016 |
Product Description
12-1041-46-15, CAN-Bus Kit Citroen/Peugeot Quadlock>ISO/antenna Fakra>DIN, ACV
CAN-Bus Kit Citroen / Fiat / Peugeot / Toyota
power/speaker > ISO
antenna > DIN
When exchanging the OEM head unit in a CAN Bus equipped vehicle, a specific CAN Bus Interface is required.
Specific and universal CAN Bus Interfaces convert relevant digital data of the respective vehicle specific CAN Bus into analog signals.
Various signals or comfort functions like ignition, illumination, reverse gear and vehicle speed signals are sorted and made available for aftermarket solutions depending on the interface used.
SWC function is not suppported.
Please compare the pictured harness connectors with the connectors in your car and make sure that they fit optically and technically.
Also check if one of the listed OEM head units were installed originally.
Check vehicle functionality and vehicle settings functionality before final assembly.
Note:
CAN Bus
connector: 40 Pin Quadlock Citroen
connector: Fakra(m) phantom supply > DIN(m)
vehicles with RD4 / RT4 / RD45 OEM 1-DIN HU
vehicles without Bosch OEM HU
vehicles without Magneti Marelli RT3 / Harman Becker OEM Sat Nav
vehicles without JBL OEM amplified system
vehicle settings with SWC supported (look into the manual)
vehicles with ECO-mode > +12V continuous current clamp 30 batterie fused
SWC function not supported
Interfaces with SWC function > item 42a-xxx-xxx
outputs:
pink: +12V ignition clamp 15 1,5A max.
orange: +12V illumination clamp 58 0,1A max.
white: +12V reverse 1,5A max.
The following signals are provided:
Reimported vehicles or vehicles with different software may be incompatible in functions.
pink: +12V ignition clamp 15 1,5A max.
orange: +12V illumination clamp 58 0,1A max.
white: +12V reverse gear signal 1,5A max.
yellow/green yellow/red: speed pulse signal
vehicle settings
