771292-1031, Rear view camera adapter Suzuki OEM camera 5Pin/4Pin, ACV

Rear view camera adapter Suzuki

Rear view camera adapters are required to maintain the OEM rear view camera.

These allow the connection of a factory pre-equipped camera to an aftermarket device with camera input.

Depending on the vehicle and equipment, the adapter provides the video signal RCA, a power supply +6V/ground for the OEM camera and the +12V revere gerar signal or this must be connected in the vehicle.

Vehicles with a 360° camera system or systems with moving distance lines may not be compatible.

Before installation check the correct assignment of the adapter to the OEM connector.

Many retrofit devices must be set to the camera function in the menu.

Note:

connector: 5 Pin / 4 Pin Suzuki
connector: OEM rear view camera > RCA(m) yellow rear view camera input aftermarket HU

vehicles with rear view camera

connector:
black: GND clamp 31
purple/white: +12V reverse gear signal output > aftermarket HU reverse gear signal input

OEM camera supply voltage: +6V

+6V supply voltage > before installation check for correct assignment with factory device by measuring

depending on the aftermarket HU > installed camera image not available:
connect an additional GND contact to the RCA outer conductor

Vehicle application:

Suzuki Grand Vitara (JT) 01/2013 - 08/2015
Suzuki Ignis (MF) 01/2017 - 04/2021
Suzuki Ignis (MF) 04/2021 - 2023
Suzuki Jimny (GJ) 10/2018 - 09/2020
Suzuki Jimny NFZ (GJ) 04/2021 - 2023
Suzuki Swift (AZ) 04/2017 - 2023
Suzuki SX4 S-Cross (JY) 10/2013 - 10/2016*
Suzuki SX4 S-Cross (JY) 10/2016 - 12/2021
Suzuki Vitara (LY) 04/2015 - 08/2018
Suzuki Vitara (LY) 10/2018 - 2023

*vehicles with Garmin OEM Sat Nav 1 control dial left

General installation instructions:

More connections, connection changes, alternative connections, connections of loose cables or connection extensions of loose cables specified in the information text or the manual are for orientation purposes only and for the information of trained specialist instaler.

More connections, changes to the cable configuration of the wiring harness or use of alternative connections or connection extensions:
1: Connections and changes are to be carried out exclusively by trained specialist installer.
2: Connections and modifications must be checked before connection for any manufacturer approvals or manufacturer warranty conditions that may be affected by the modifications.
3: Connections and modifications must be checked for function and correctness by measuring and comparing them with the vehicle's cable assignment diagram before connection.
4: Connections and modifications are made on the user's own responsibility without guarantee of function.
5: Connections and modifications are made on the user's own responsibility without any guarantee of damage to the vehicle, the retrofit device or the interface.
6: Modifications to the pre-assembled wiring harness may invalidate the product's warranty.

Technical Data, Signals, Connections, and Can-Bus

Connection Specifications

• Connection: 5 Pin / 4 Pin Suzuki connector
• Connection: OEM rearview camera > Cinch(m) yellow rearview camera input aftermarket device
• Connection: black: ground terminal 31
• Connection: purple/white: +12 V reverse signal output > aftermarket device reverse signal input

Technical Specifications

• Depending on the vehicle and equipment, the adapter provides the video signal Cinch, a power supply +6V/ground for the OEM camera, and the +12V reverse signal, or this must be connected at a suitable location in the vehicle.
• Camera supply voltage: +6V

Installation Instructions

Installation Preparation

• Before installation, check the correct pin assignment of the adapter with the OEM connection.
• Many aftermarket devices need to be set to the camera function in the menu.
• +6V supply voltage > check correct pin assignment with factory device by measuring before installation

Installation Notes

• Depending on the installed aftermarket device > camera image not available: connect an additional ground contact to the Cinch outer conductor
• Connections, connection changes, alternative connections, connections of loose cables, or connection extensions of loose cables specified in the note text or the operating instructions are for orientation and information for trained personnel only.
• Further connections, changes to the cable configuration of the wiring harness, or use of alternative connections or connection extensions:

1. Connections and changes are to be carried out exclusively by trained personnel
2. Connections and changes must be checked for possible manufacturer approvals or for manufacturer warranty conditions that may be affected by the changes before connection
3. Connections and changes must be checked for function and correctness by measuring and comparing with the vehicle's wiring diagram before connection
4. Connections and changes are made at your own risk without a guarantee of function
5. Connections and changes are made at your own risk without a guarantee of damage to the vehicle, the aftermarket device, or the interface
6. Changes to the pre-assembled wiring harness may void the product warranty